Author Topic: Post links to your Pi projects (Read 48872 times)

DaOld Man · « **on:** March 29, 2015, 02:44:07 pm »

I know we need to start and keep Pi projects in the "Project Announcements" section, but what say we make a sticky on here that gives links to pi projects?

Simliar to the "post links to your rotating project" in Automated projects.

PL1 · « **Reply #1 on:** March 29, 2015, 05:49:54 pm »

Stickied.

Scott

mvolke1 · « **Reply #2 on:** April 29, 2015, 01:58:46 pm »

Here's mine: http://forum.arcadecontrols.com/index.php/topic,141979.0.html

stallion85 · « **Reply #3 on:** April 30, 2015, 05:29:39 pm »

Here is my Raspberry PI miniarcade-
http://forum.arcadecontrols.com/index.php/topic,145187.0.html

elvis · « **Reply #4 on:** May 04, 2015, 05:46:05 pm »

Moon Patrol (Scratch built replica, Jakobud plans, RPi powered)

http://forum.arcadecontrols.com/index.php/topic,141846.0.html

Started: 16 June 2014
Complete: 13 December 2014

Peabo · « **Reply #5 on:** July 13, 2015, 02:14:49 pm »

Haruman Pretendo kit powered by a RPI 2 B. It's still a WIP. The monitor is an HP 1825(18.1"), 14lb beast.

http://forum.arcadecontrols.com/index.php/topic,146245.0.html

DaOld Man · « **Reply #6 on:** August 02, 2015, 05:12:55 pm »

My attempt at putting a RPi in a NES case.

http://forum.arcadecontrols.com/index.php/topic,146625.0.html

severdhed · « **Reply #7 on:** September 03, 2015, 05:28:41 pm »

Here is my Pi in an SNES case project

http://forum.arcadecontrols.com/index.php/topic,147154.0.html

Mario67 · « **Reply #8 on:** September 07, 2015, 03:02:16 am »

Here's mine

http://www.arcadewinkel.nl/blog/de-rpi2-1-speler-bartop-arcade-van-mario.html

dee2eR · « **Reply #9 on:** December 12, 2015, 05:39:54 am »

This is my rpi project:
http://www.aussiearcade.com.au/showthread.php/67986-JAMMA-board-from-Raspberry-PI

ballboff · « **Reply #10 on:** June 09, 2016, 04:43:48 pm »

Here's my project http://forum.arcadecontrols.com/index.php/topic,150400.0.html

this is just a mod, rather than a build. This is a hack of the ion icade Bluetooth controller, with an added 7 inch hdmi screen and some new buttons. A raspberry pi 3 and an ipac keyboard encoder that I had lying around from a previous project.

SeC · « **Reply #11 on:** June 16, 2016, 03:29:02 pm »

Here's my fresh completed build - http://forum.arcadecontrols.com/index.php/topic,150946.0.html

lazrhog · « **Reply #12 on:** July 20, 2016, 03:12:34 pm »

I uploaded a video of my Raspberry Pi 2 Bartop Arcade here

GSXRMovistar · « **Reply #13 on:** July 22, 2016, 04:06:12 pm »

Suppose this one should be added here also, RetroWonder - Pi powered mini bar-top

Started - 29th April 2016
Finished - 10th July 2016

http://forum.arcadecontrols.com/index.php/topic,151195.0.html

Retro Wonder 02 by Andy Baker, on Flickr

sjowett · « **Reply #14 on:** September 12, 2016, 10:46:47 pm »

....and here is my Raspberry Pi (RetroPie) Cocktail Cabinet.

http://forum.arcadecontrols.com/index.php/topic,151653.0.html?PHPSESSID=p8mmfrfhn6scminrlt3rtfaab4

or here is a direct link to the fully detailed "Instructable"

http://www.instructables.com/id/RetroPie-Arcade-Cabinet-Cocktail-Style/

..hope you like it!

gomeq · « **Reply #15 on:** November 22, 2016, 03:50:46 am »

Here is my two player bartop project in progress. Bought a pi3 and probably will run Retropie on it.

http://forum.arcadecontrols.com/index.php?topic=151614.0

Stu_C · « **Reply #16 on:** November 28, 2016, 11:47:30 am »

Here's my Space Invaders Themed Bartop Cabinet (UK) https://retropie.org.uk/forum/topic/5593/space-invaders-themed-bartop-arcade-uk-completed

Dal1980 · « **Reply #17 on:** January 21, 2017, 09:52:12 am »

Raspi 3 Steepletone project: http://forum.arcadecontrols.com/index.php/topic,153047.0.html

DaOld Man · « **Reply #18 on:** February 18, 2017, 07:46:40 am »

I installed an RPi in a non working Sega Genesis case. I did not do a build thread but I can, if interest is high.

mike5im5 · « **Reply #19 on:** March 09, 2017, 12:01:26 pm »

A couple of my "mini" Pi Projects

TMNT Themed ICade
http://forum.arcadecontrols.com/index.php/topic,153590.0.html

Afterburner Themed Flight Cabinet
http://forum.arcadecontrols.com/index.php/topic,153592.0.html

Mini Golden Tee Machines

sKott · « **Reply #20 on:** April 15, 2017, 10:53:21 am »

Here's mine...

http://forum.arcadecontrols.com/index.php/topic,153970.0.html

chito · « **Reply #21 on:** June 21, 2017, 11:00:15 pm »

Here are my projects with links to their build threads. All my projects are also linked in my signature.

This one is still WIP. Also found the official "Powered by Pi" logo for this one

This one is done.

proplayer77 · « **Reply #22 on:** November 05, 2017, 01:49:48 pm »

Heres mine:
http://forum.arcadecontrols.com/index.php/topic,155300.0.html

darkSSide · « **Reply #23 on:** November 14, 2017, 11:49:58 pm »

Here is my project called the Millennium Pi and it portable!

Sent from my Atari 2600

acvieluf · « **Reply #24 on:** November 16, 2017, 08:26:30 am »

Quote from: darkSSide on November 14, 2017, 11:49:58 pm

Here is my project called the Millennium Pi and it portable!

Sent from my Atari 2600

Awesome idea for a case! I'm hoping to find an inexpensive R2D2 somewhere for something similar! But needless to say, "R2D2" and "cheap" are never in the same sentence, it seems. Haha

Sent from my Casio keyboard

ontheoggin · « **Reply #25 on:** December 09, 2017, 10:03:54 am »

new retropie cocktail 2player arcade built using a beer keg. Screen turns 90 degrees for vertical and horizonal games

darthpaul · « **Reply #26 on:** December 23, 2017, 03:52:56 pm »

Needed something to go with my Star Wars\70s themed spare bedroom, I call it PiTARI.

DaOld Man · « **Reply #27 on:** January 02, 2018, 02:32:42 pm »

Good job DarthPaul. got any links to the build? I havent seen an 8 track player in a long time.

severdhed · « **Reply #28 on:** January 11, 2018, 11:16:27 pm »

here is my N64 project. It is not technically a Raspberry Pi, but a different single board computer called the Odroid XU4. Full speed N64 and Dreamcast emulation!!!!

http://forum.arcadecontrols.com/index.php?topic=156294.0

vaportrail · « **Reply #29 on:** February 10, 2018, 03:38:55 pm »

Here is a link to my Bartop build. It’s a GRS cabinet running on raspberry Pi3 with HyperPi front end. You’ll also find links to an unboxing and build video. The Mars Attacks artwork was assembled by me, with images found on the internet, and printed by GRS.

http://forum.arcadecontrols.com/index.php/topic,156442.0.html

keller · « **Reply #30 on:** April 16, 2018, 08:00:20 pm »

Keep up the great work!

Titchgamer · « **Reply #31 on:** April 17, 2018, 04:23:20 pm »

Quote from: severdhed on January 11, 2018, 11:16:27 pm

here is my N64 project. It is not technically a Raspberry Pi, but a different single board computer called the Odroid XU4. Full speed N64 and Dreamcast emulation!!!!

http://forum.arcadecontrols.com/index.php?topic=156294.0

How you finding that XU4?
Ive read allot about them recently, sounds interesting.

DaOld Man · « **Reply #32 on:** July 04, 2018, 09:15:00 am »

Heres my photo booth project, using an RPi 2.

http://forum.arcadecontrols.com/index.php/topic,157648.0.html

leapinlew · « **Reply #33 on:** October 09, 2018, 07:39:05 pm »

Nothing too fancy here, but it still turned out pretty cool

Marcoqwerty · « **Reply #34 on:** January 07, 2019, 08:16:15 am »

My ICECADE project!

Based on RPI 3, with spinner and rotate screen button (thanks to @DaOld Man

) for TV screen.

http://supercoin.blogspot.com/2018/05/icecade-il-piccolo-progetto-raspberry.html

DaOld Man · « **Reply #35 on:** January 13, 2019, 07:03:55 pm »

Quote from: Marcoqwerty on January 07, 2019, 08:16:15 am

My ICECADE project!

Based on RPI 3, with spinner and rotate screen button (thanks to @DaOld Man ) for TV screen.

http://supercoin.blogspot.com/2018/05/icecade-il-piccolo-progetto-raspberry.html

Beautiful machine!! Thanks for the kudos man.. It was a fun project.

Titchgamer · « **Reply #36 on:** January 14, 2019, 01:37:50 am »

Nice

alinke · « **Reply #37 on:** March 31, 2019, 11:27:11 pm »

It's a vertical RetroPie bartop with the key feature that the LED marquee will change to match the selected game. Also the characters on the sides are laser cut inlays and not stickers.

Did a full write-up with build instructions, files, scripts on Instructuables https://www.instructables.com/id/Vertical-Bartop-Arcade-With-Integrated-PIXEL-LED-D/
Video here too==>

Would love any feedback, thanks!

tikiandskull · « **Reply #38 on:** April 02, 2019, 09:36:45 am »

here for me

http://forum.arcadecontrols.com/index.php/topic,159690.0.html

J_K_M_A_N · « **Reply #39 on:** April 02, 2019, 11:13:21 am »

Quote from: alinke on March 31, 2019, 11:27:11 pm

It's a vertical RetroPie bartop with the key feature that the LED marquee will change to match the selected game. Also the characters on the sides are laser cut inlays and not stickers.

That is very cool! I love the design. I want to build something smaller like that myself. Very well done!

J_K_M_A_N


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Post links to your Pi projects (Read 48872 times)

gomeq