Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: coin door to i-pac??  (Read 1936 times)

0 Members and 1 Guest are viewing this topic.

Petesie

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 136
  • Last login:September 06, 2010, 07:16:23 am
coin door to i-pac??
« on: August 15, 2008, 06:53:32 pm »
does anyone know the easiest way to wire my coin door to my mini i-pac so that coins register on the screen??? pictures would be good if possible.
Logged

Thenasty

  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4419
  • Last login:Yesterday at 09:06:54 pm
    • Thenasty's Arcademania Horizontal/Vertical monitor setup.
Re: coin door to i-pac??
« Reply #1 on: August 15, 2008, 10:31:41 pm »
same way you connected your buttons. Underneath the Coin Door/Chute, there is also a Cherry Switch. Just wire the GND and (5 in ipac) to NO (normally open). Leave the NC alone, don't wire anything to it. Just those 2 ( GND, NO).

the WIKI have more info.
Logged
Thenasty's Arcademania Horizontal/Vertical setup.
http://forum.arcadecontrols.com/index.php?topic=26696.0

Free VGA Breakout Cable
http://forum.arcadecontrols.com/index.php?topic=38228.0

Ultimate All in One Coin Mech write up (Make your own)
http://forum.arcadecontrols.com/index.php?topic=19200.0

Ginsu Victim

  • Yeah, owning a MAME cab only leads to owning real ones. MAME just isn't good enough. It's a gateway drug.
  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10092
  • Last login:June 28, 2025, 10:45:55 pm
  • Comanche, OK -- USA
Re: coin door to i-pac??
« Reply #2 on: August 16, 2008, 04:03:15 pm »
Also, if you have a switch with three prongs pointing downward, you'll wire it to the outer ones, leaving the middle prong alone.
Logged

nullb0y

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1307
  • Last login:November 17, 2024, 04:06:05 pm
  • Slow In Fast Out
    • WAT Racing
Re: coin door to i-pac??
« Reply #3 on: August 17, 2008, 12:26:47 pm »
I wire mine up using a molex cable
That way when i remove the cp i can just un-plug it and plug it back in
Logged
Slow In Fast Out

Ginsu Victim

  • Yeah, owning a MAME cab only leads to owning real ones. MAME just isn't good enough. It's a gateway drug.
  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10092
  • Last login:June 28, 2025, 10:45:55 pm
  • Comanche, OK -- USA
Re: coin door to i-pac??
« Reply #4 on: August 17, 2008, 12:35:53 pm »
Quote from: nullb0y on August 17, 2008, 12:26:47 pm
I wire mine up using a molex cable
That way when i remove the cp i can just un-plug it and plug it back in

Thank you! I've been trying to figure out an easy solution for something similar. Can't believe I didn't think of that!
Logged

nullb0y

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1307
  • Last login:November 17, 2024, 04:06:05 pm
  • Slow In Fast Out
    • WAT Racing
Re: coin door to i-pac??
« Reply #5 on: August 17, 2008, 01:45:32 pm »
i had a bunch of harness cables from the cabinet i got
so i used some 3 prong power cable dongle molexes
Huge wires though lol
You could easily use a power supply molex from a computer
I know ive use some on arcade projects before
Radio shack also sells them in different sizes
Logged
Slow In Fast Out

Ginsu Victim

  • Yeah, owning a MAME cab only leads to owning real ones. MAME just isn't good enough. It's a gateway drug.
  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10092
  • Last login:June 28, 2025, 10:45:55 pm
  • Comanche, OK -- USA
Re: coin door to i-pac??
« Reply #6 on: August 17, 2008, 02:39:19 pm »
Quote
You could easily use a power supply molex from a computer

Yeah, I have several around here. Time to get to work on it...
Logged

nullb0y

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1307
  • Last login:November 17, 2024, 04:06:05 pm
  • Slow In Fast Out
    • WAT Racing
Re: coin door to i-pac??
« Reply #7 on: August 17, 2008, 06:28:51 pm »
Quote from: GinsuVictim on August 17, 2008, 02:39:19 pm
Quote
You could easily use a power supply molex from a computer

Yeah, I have several around here. Time to get to work on it...

SEE SEE i contribute .... ocasionally.....
Logged
Slow In Fast Out
Pages: [1]
  
Go Up
« previous next »