Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!  (Read 13151 times)

0 Members and 1 Guest are viewing this topic.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« on: September 24, 2015, 08:35:51 pm »
So I have been reading this forum for years knowing that eventually I would finally decide to go ahead and build my own MAME machine.  Well today is the day.  Actually a few days ago but who's counting :)

Obviously, I have been inspired by the great contributors here.  Main inspiration includes:
- ChanceKJ's Flynn's Arcade: http://forum.arcadecontrols.com/index.php/topic,146068.0.html
- Project Mame: http://forum.arcadecontrols.com/index.php/topic,76150.0.html
- Ond Metropolis: http://forum.arcadecontrols.com/index.php/topic,118612.0.html


I read ChanceKJís thread last year with a lot of interest and really liked the idea of Flynnís arcade.  I especially focused on the arcade itself (the building) since it is the place where the gaming happens and has references to video games etc.  Anyways, I was toying with my new 3D printer back then and set on to try and make a replica of the Flynnís neon sign at the front.  I thought this could make for a pretty kickass marquee for an arcade cabinet.   I spend a few weeks designing and building it and was pretty happy with the results (see pics).  Thus I knew I was going to make Yet Another Flynnís Arcade!

While I absolutely love ChanceKJís design, I really wanted to make something much smaller.  I already have a pinball machine and space (read wife tokens) is limited.  So I settled on a 2 player system that would be fairly minimalistic.  I also wanted it to be well setup for Robotron and so sticks needed to be reasonably close to one another.  After searching for a while I found the Project Mame design which is pretty much what I am looking for.  I changed the marque area to be curved in order to match the neon sign and the Arcade building shape.  I also really like Ondís idea for the front part with LEDs so I added that in.  I changed the base to make it more rigid and used a design similar to ChanceKJís Flynn.  Below are some shots of the concept 3D model as it stands now.

More to come...
« Last Edit: November 09, 2015, 11:34:56 am by StefR »

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #1 on: September 24, 2015, 11:13:52 pm »
 I just realized even my title is not that original: http://forum.arcadecontrols.com/index.php/topic,147258.0.html

Oh well, great minds think alike I guess  :)

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #2 on: September 25, 2015, 08:29:49 am »
So happy to see you dont have another member of the fleet for a control panel.  3D print looks neat.
If you are helping someone and expecting something in return, you are doing business not kindness.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #3 on: September 25, 2015, 09:05:06 am »
So happy to see you dont have another member of the fleet for a control panel.  3D print looks neat.

LOL, yeah I guess that's the eternal dilemma.  Not too big or have all the controls possible...  One idea I am toying with is making the CP easily swap-able such that I could support other control configuration without requiring a landing carrier.  That will be for a future project.  CP will be removable for now.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #4 on: September 25, 2015, 09:07:02 am »
Just picked up the CNC'd parts.  This is finally getting real!




Brouhaha

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 72
  • Last login:March 08, 2019, 10:30:04 am
  • Learning as I go!
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #5 on: September 25, 2015, 09:48:00 am »
That neon sign is freakin' cool!  :applaud:

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2531
  • Last login:August 09, 2019, 04:54:21 pm
  • SHMUP'EM
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #6 on: September 25, 2015, 09:57:24 am »
Sold on that many admin buttons? What are they going to be? Esc and pause I assume, and ?

Looking good so far, remember you can always change the title of your thread by modifying the first post.


yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18894
  • Last login:Today at 01:17:29 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Original Name
« Reply #7 on: September 25, 2015, 10:00:26 am »
Yeah, change your title. No one "owns" the name Flynn's Arcade. This is YOUR project, not a simple clone, so the title should reflect it. Looking forward to seeing what you do.
***Build what you dig, bro. Build what you dig.***

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #8 on: September 25, 2015, 12:30:43 pm »
Yeah, change your title. No one "owns" the name Flynn's Arcade. This is YOUR project, not a simple clone, so the title should reflect it. Looking forward to seeing what you do.

Agreed, I just haven't had any bright ideas on a name yet.  If you guys have any ideas, fire away! 

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #9 on: September 25, 2015, 12:34:49 pm »
Sold on that many admin buttons? What are they going to be? Esc and pause I assume, and ?

Looking good so far, remember you can always change the title of your thread by modifying the first post.



The two buttons on the top left are 1P and 2P.  The top 3 in the middle are for a spinner and 1 button on each side.  Top right pair is admin buttons.  I have not finalized the CP layout yet and sure could use you guys' inputs.  How many admin buttons do you guys use and what are you primarily using them for?

Yeah I'll change the name when I can think of something better...

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #10 on: September 25, 2015, 12:36:42 pm »
That neon sign is freakin' cool!  :applaud:

BTW, for those who have 3D printers and interest in doing one, I have posted the model files on Thingiverse.
http://www.thingiverse.com/thing:874145

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2531
  • Last login:August 09, 2019, 04:54:21 pm
  • SHMUP'EM
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #11 on: September 25, 2015, 12:40:17 pm »
Could you use P1 button 3 as the button for the spinner?  I can see a case for Esc and Pause buttons, though some might disagree.  You have a coin door in your render, so I'd skip coin up buttons, or just have one since MOST games support coin up for both players of course this may be your intention as you didn't mention them.


ChanceKJ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3132
  • Last login:August 13, 2019, 10:35:16 am
  • Calgary, Ab, Canada.
    • The Canadian Arcade!
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #12 on: September 26, 2015, 04:45:25 pm »
Love it!  :cheers:

That marquee is bad ass.

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4250
  • Last login:July 29, 2019, 06:04:02 pm
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #13 on: September 26, 2015, 04:52:15 pm »
Love it!  :cheers:

That marquee is bad ass.

+1

That marquee really is awesome.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #14 on: September 26, 2015, 07:08:32 pm »
Received the coin door!  Also got the base done today.  Its essentially a scaled down copy of what Chance did.  Really liked the idea of the back wheels with levelers in the front.  Still waiting for the wheels to arrive though so I 3D printed a copy in the meantime so I can work.  Also 3D printed a bunch of templates for the router.  Man, that little 3D printer turned to be more useful than I thought it would.


Slippyblade

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3156
  • Last login:April 26, 2019, 02:25:09 pm
  • And to the death god we say, "Not today!"
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #15 on: September 26, 2015, 07:33:43 pm »
Man, that little 3D printer turned to be more useful than I thought it would.

So jealous.  I want one amazingly badly.

BGoulette

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 183
  • Last login:August 21, 2019, 08:08:38 pm
    • lazerjoose.com
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #16 on: September 27, 2015, 12:44:52 am »
Man, that little 3D printer turned to be more useful than I thought it would.

So jealous.  I want one amazingly badly.

+1

After modeling all kinds of crap to test for fit, it'd be sooo nice to be able to just hit Print and be done with it...

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #17 on: September 29, 2015, 09:23:51 pm »
Making progress...got all the panels cut and making my way through routing all the various slots for fans, etc.

What do you guys typically do for the overall cabinet power switch? I vaguely remember a toggle switch on top for some reason but I am not sure. 

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #18 on: October 07, 2015, 11:09:46 am »
Been struggling with the art for a while and decided I needed help.  I asked the guys at arcadepix.com and here is what they came up with.  I'm quite happy with that!

ChanceKJ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3132
  • Last login:August 13, 2019, 10:35:16 am
  • Calgary, Ab, Canada.
    • The Canadian Arcade!
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #19 on: October 07, 2015, 01:42:38 pm »
Ok, thats pretty ---smurfing--- cool. :)  I dig the bright neon colours and the logo at the top which I'm assuming will flank the 3D marque quite nicely.

 :cheers:

vwalbridge

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2079
  • Last login:March 29, 2019, 12:10:53 pm
  • Don't half-ass two things, whole-ass one thing.
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #20 on: October 07, 2015, 01:48:41 pm »
That artwork is very nice. However, that silhouette of PAC-MAN on the left Tron cycle seems out of place but it is subtle. Did you specifically want that there?
If you can read this, it means Photobucket's money grab ruined my signature photos.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #21 on: October 07, 2015, 02:11:09 pm »
That artwork is very nice. However, that silhouette of PAC-MAN on the left Tron cycle seems out of place but it is subtle. Did you specifically want that there?

I thought that at first (I'm a no character on the art guy) but I think it works in this concept for a few reasons.  The concept is that the cabinet is like Flynn's arcade (the building).  Inside is where gaming happens.  The stuff on the CP is meant to represent things inside the arcade.  If you look closely, you will see they are actually neon signs you could find in an arcade.  Pac man is one of them. 
« Last Edit: October 14, 2015, 07:11:23 pm by StefR »

vwalbridge

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2079
  • Last login:March 29, 2019, 12:10:53 pm
  • Don't half-ass two things, whole-ass one thing.
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #22 on: October 07, 2015, 02:18:17 pm »
That artwork is very nice. However, that silhouette of PAC-MAN on the left Tron cycle seems out of place but it is subtle. Did you specifically want that there?

I thoughts that at first (I'm a no character on the art guy) but I think it works in this concept for a few reasons.  The concept is that the cabinet is like Flynn's arcade (the building).  Inside is where gaming happens.  The stuff on the CP is meant to represent things inside the arcade.  If you look closely, you will see they are actually neon signs you could find in an arcade.  Pac man is one of them.

Right on. It's tastefully done. Just checking.  ;)
If you can read this, it means Photobucket's money grab ruined my signature photos.

melvinbates

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 104
  • Last login:May 06, 2019, 05:02:04 pm
  • Another day in paradise
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #23 on: October 08, 2015, 02:40:48 pm »
StefR, what program did you use to model the 3d printed letters?  Did you have to place all the el-wire holders manually?  Very impressive overall.  Can't wait to see it finished.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #24 on: October 08, 2015, 02:45:09 pm »
StefR, what program did you use to model the 3d printed letters?  Did you have to place all the el-wire holders manually?  Very impressive overall.  Can't wait to see it finished.

All done in sketchup and printed with cura.  Each letter is one piece including the elwire brackets.  I designed the elwire brackets so they snap in nicely without breaking.  Took a few iterations.  The 3D files are posted on thingiverse if you want to check out the model.  This approach was inspired from a 1/3 scale some dude designed out of metal.  He has a thread on pinside for those interested in larger replicas.

https://pinside.com/pinball/forum/topic/flynns-arcade-sign-13-scale-for-my-gameroom

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2531
  • Last login:August 09, 2019, 04:54:21 pm
  • SHMUP'EM
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #25 on: October 08, 2015, 05:09:40 pm »
Am I just OCD?

WHY O WHY are those admin buttons NOT CENTERED!


StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #26 on: October 08, 2015, 05:26:13 pm »
Am I just OCD?

WHY O WHY are those admin buttons NOT CENTERED!

That was the initial version where I was trying to have the spinner in an area where you can get your hands through and not be bothered by the joysticks.  I built a mockup and didn't like it so I changed it in the latest rev.  The final version only has a spinner in the middle with no buttons.  The two joysticks are now a bit further apart leaving more room to access the spinner.  Top left has 1P / 2P buttons and top right has 2 ctrl buttons.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #27 on: October 09, 2015, 04:43:21 pm »
Cab is coming along nicely although everything seems to take 4 times longer than I had planned.  Oh well.

My CP is angled and will have T molding on.  Today's headache was figuring out how to do an angled T molding slot.  I don't have the angle jig for my router and didnt feel like spending 60$ and waiting a couple days to get it.  Bah, nothing you can't solve with a 3D printer.  Built myself a jig at the exact angle I needed and bolted it on the router.  Worked like a charm.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #28 on: October 13, 2015, 05:21:09 pm »
Received the side art, marquee and CP vinyl printouts today!  Thanks to Lucian045 for the super quick turnaround.  I can't wait to put it on but I am not quite there yet.  Time to pick the T-molding color.  Sucks that there is no suitable orange available.


gbeef

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 325
  • Last login:October 22, 2018, 03:32:26 pm
    • arcadepix.com
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #29 on: October 14, 2015, 11:59:09 am »
It printed out awesome. You can go with either yellow, orange or red. I think your pretty safe. Cant wait to see it all together. :cheers:



My cabs
4 Player Arcade
X-men Arcade Remixed
My Pin Cab Attack of the PINZ cab
My Racing Cabinet Cab [URL=http://forum.arcadecontrols.com/index.php?topic=

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #30 on: October 14, 2015, 03:28:40 pm »
It printed out awesome. You can go with either yellow, orange or red. I think your pretty safe. Cant wait to see it all together. :cheers:

The wife and kids seem to think the gold and silver ones look best.  I'm not convinced so I think I will wait until everything is on the cab and then take a second look at T molding colors.

BGoulette

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 183
  • Last login:August 21, 2019, 08:08:38 pm
    • lazerjoose.com
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #31 on: October 14, 2015, 03:31:27 pm »
The wife and kids seem to think the gold and silver ones look best.  I'm not convinced so I think I will wait until everything is on the cab and then take a second look at T molding colors.

Just in case you weren't aware, the gold/silver are actually a type of foil or film laminated onto an otherwise semi-clear length of t-molding, meaning if it takes too many bumps or scrapes, rather than just a gouge, you'd have some "un-gold" or "un-silver" spots. It does look cool, that's for sure, but something worth bearing in mind.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #32 on: October 14, 2015, 03:35:49 pm »
Just in case you weren't aware, the gold/silver are actually a type of foil or film laminated onto an otherwise semi-clear length of t-molding, meaning if it takes too many bumps or scrapes, rather than just a gouge, you'd have some "un-gold" or "un-silver" spots. It does look cool, that's for sure, but something worth bearing in mind.

Thanks, I didn't realize that.  I will do some stress test on the bits I have here.  There will be kids playing the thing and it will get some abuse (as it should) so I will have to bear that in mind.
« Last Edit: October 14, 2015, 03:47:18 pm by StefR »

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #33 on: October 14, 2015, 03:36:22 pm »
Put on the first coat of black paint today.  While its drying, I started designing the marquee bracket and the bracket that will hold the neon sign.  I knew I was in for some fun when I decided to go with a curved marquee.  Couldn't help it and had to test the fit of the neon sign.  Fits like a glove.

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2531
  • Last login:August 09, 2019, 04:54:21 pm
  • SHMUP'EM
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #34 on: October 14, 2015, 03:41:27 pm »
In my best Vader voice.... "Impressive"

Vigo

  • the Scourage of Carpathia
  • Trade Count: (+24)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6058
  • Last login:Yesterday at 09:03:24 am
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #35 on: October 14, 2015, 05:14:05 pm »
Haven't had a chance to look at your thread until today. Enjoying this build and your clever uses for 3d printing. Good innovation.  :cheers:

DudeRegular

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 273
  • Last login:Today at 10:38:14 am
  • I have no idea what I am doing
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #36 on: October 14, 2015, 09:52:04 pm »
Project is looking great man. The neon marquee is killer.

n3wt0n

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 533
  • Last login:February 27, 2019, 09:20:54 am
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #37 on: October 15, 2015, 06:47:00 am »
Great job so far! The marquee looks great and the artwork will pull it all together nicely. I am looking forward to seeing the finished results.  :applaud:

broberg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 75
  • Last login:September 28, 2018, 09:53:27 am
  • Less is More
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #38 on: October 15, 2015, 08:04:03 am »
Loving the sign, you should do a "brick" background behind it! :D
Building ---steaming pile of meadow muffin--- is fun!
Currently working on : Tron Desk, Kawasaki GPZ900R, Chevrolet S10 And Suzuki DR650

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #39 on: October 15, 2015, 09:45:05 am »
Loving the sign, you should do a "brick" background behind it! :D

Yes that's exactly the plan.  This was just a quick fit check and didn't have the marquee background installed.  You can see it in the pic of the printed artwork a few posts back.