Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!  (Read 13808 times)

0 Members and 2 Guests are viewing this topic.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« on: September 24, 2015, 08:35:51 pm »
So I have been reading this forum for years knowing that eventually I would finally decide to go ahead and build my own MAME machine.  Well today is the day.  Actually a few days ago but who's counting :)

Obviously, I have been inspired by the great contributors here.  Main inspiration includes:
- ChanceKJ's Flynn's Arcade: http://forum.arcadecontrols.com/index.php/topic,146068.0.html
- Project Mame: http://forum.arcadecontrols.com/index.php/topic,76150.0.html
- Ond Metropolis: http://forum.arcadecontrols.com/index.php/topic,118612.0.html


I read ChanceKJís thread last year with a lot of interest and really liked the idea of Flynnís arcade.  I especially focused on the arcade itself (the building) since it is the place where the gaming happens and has references to video games etc.  Anyways, I was toying with my new 3D printer back then and set on to try and make a replica of the Flynnís neon sign at the front.  I thought this could make for a pretty kickass marquee for an arcade cabinet.   I spend a few weeks designing and building it and was pretty happy with the results (see pics).  Thus I knew I was going to make Yet Another Flynnís Arcade!

While I absolutely love ChanceKJís design, I really wanted to make something much smaller.  I already have a pinball machine and space (read wife tokens) is limited.  So I settled on a 2 player system that would be fairly minimalistic.  I also wanted it to be well setup for Robotron and so sticks needed to be reasonably close to one another.  After searching for a while I found the Project Mame design which is pretty much what I am looking for.  I changed the marque area to be curved in order to match the neon sign and the Arcade building shape.  I also really like Ondís idea for the front part with LEDs so I added that in.  I changed the base to make it more rigid and used a design similar to ChanceKJís Flynn.  Below are some shots of the concept 3D model as it stands now.

More to come...
« Last Edit: November 09, 2015, 11:34:56 am by StefR »

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #1 on: September 24, 2015, 11:13:52 pm »
 I just realized even my title is not that original: http://forum.arcadecontrols.com/index.php/topic,147258.0.html

Oh well, great minds think alike I guess  :)

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #2 on: September 25, 2015, 08:29:49 am »
So happy to see you dont have another member of the fleet for a control panel.  3D print looks neat.
If you are helping someone and expecting something in return, you are doing business not kindness.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #3 on: September 25, 2015, 09:05:06 am »
So happy to see you dont have another member of the fleet for a control panel.  3D print looks neat.

LOL, yeah I guess that's the eternal dilemma.  Not too big or have all the controls possible...  One idea I am toying with is making the CP easily swap-able such that I could support other control configuration without requiring a landing carrier.  That will be for a future project.  CP will be removable for now.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #4 on: September 25, 2015, 09:07:02 am »
Just picked up the CNC'd parts.  This is finally getting real!




Brouhaha

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 72
  • Last login:March 08, 2019, 10:30:04 am
  • Learning as I go!
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #5 on: September 25, 2015, 09:48:00 am »
That neon sign is freakin' cool!  :applaud:

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2531
  • Last login:September 24, 2019, 03:08:38 pm
  • SHMUP'EM
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #6 on: September 25, 2015, 09:57:24 am »
Sold on that many admin buttons? What are they going to be? Esc and pause I assume, and ?

Looking good so far, remember you can always change the title of your thread by modifying the first post.


yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Original Name
« Reply #7 on: September 25, 2015, 10:00:26 am »
Yeah, change your title. No one "owns" the name Flynn's Arcade. This is YOUR project, not a simple clone, so the title should reflect it. Looking forward to seeing what you do.
***Build what you dig, bro. Build what you dig.***

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #8 on: September 25, 2015, 12:30:43 pm »
Yeah, change your title. No one "owns" the name Flynn's Arcade. This is YOUR project, not a simple clone, so the title should reflect it. Looking forward to seeing what you do.

Agreed, I just haven't had any bright ideas on a name yet.  If you guys have any ideas, fire away! 

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #9 on: September 25, 2015, 12:34:49 pm »
Sold on that many admin buttons? What are they going to be? Esc and pause I assume, and ?

Looking good so far, remember you can always change the title of your thread by modifying the first post.



The two buttons on the top left are 1P and 2P.  The top 3 in the middle are for a spinner and 1 button on each side.  Top right pair is admin buttons.  I have not finalized the CP layout yet and sure could use you guys' inputs.  How many admin buttons do you guys use and what are you primarily using them for?

Yeah I'll change the name when I can think of something better...

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #10 on: September 25, 2015, 12:36:42 pm »
That neon sign is freakin' cool!  :applaud:

BTW, for those who have 3D printers and interest in doing one, I have posted the model files on Thingiverse.
http://www.thingiverse.com/thing:874145

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2531
  • Last login:September 24, 2019, 03:08:38 pm
  • SHMUP'EM
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #11 on: September 25, 2015, 12:40:17 pm »
Could you use P1 button 3 as the button for the spinner?  I can see a case for Esc and Pause buttons, though some might disagree.  You have a coin door in your render, so I'd skip coin up buttons, or just have one since MOST games support coin up for both players of course this may be your intention as you didn't mention them.


ChanceKJ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3137
  • Last login:November 14, 2019, 06:50:20 pm
  • Calgary, Ab, Canada.
    • The Canadian Arcade!
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #12 on: September 26, 2015, 04:45:25 pm »
Love it!  :cheers:

That marquee is bad ass.

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4307
  • Last login:November 15, 2019, 07:39:46 pm
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #13 on: September 26, 2015, 04:52:15 pm »
Love it!  :cheers:

That marquee is bad ass.

+1

That marquee really is awesome.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #14 on: September 26, 2015, 07:08:32 pm »
Received the coin door!  Also got the base done today.  Its essentially a scaled down copy of what Chance did.  Really liked the idea of the back wheels with levelers in the front.  Still waiting for the wheels to arrive though so I 3D printed a copy in the meantime so I can work.  Also 3D printed a bunch of templates for the router.  Man, that little 3D printer turned to be more useful than I thought it would.


Slippyblade

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3156
  • Last login:April 26, 2019, 02:25:09 pm
  • And to the death god we say, "Not today!"
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #15 on: September 26, 2015, 07:33:43 pm »
Man, that little 3D printer turned to be more useful than I thought it would.

So jealous.  I want one amazingly badly.

BGoulette

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 183
  • Last login:November 13, 2019, 04:23:37 pm
    • lazerjoose.com
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #16 on: September 27, 2015, 12:44:52 am »
Man, that little 3D printer turned to be more useful than I thought it would.

So jealous.  I want one amazingly badly.

+1

After modeling all kinds of crap to test for fit, it'd be sooo nice to be able to just hit Print and be done with it...

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project YAFA: Yet Another Flynn's Arcade!
« Reply #17 on: September 29, 2015, 09:23:51 pm »
Making progress...got all the panels cut and making my way through routing all the various slots for fans, etc.

What do you guys typically do for the overall cabinet power switch? I vaguely remember a toggle switch on top for some reason but I am not sure. 

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #18 on: October 07, 2015, 11:09:46 am »
Been struggling with the art for a while and decided I needed help.  I asked the guys at arcadepix.com and here is what they came up with.  I'm quite happy with that!

ChanceKJ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3137
  • Last login:November 14, 2019, 06:50:20 pm
  • Calgary, Ab, Canada.
    • The Canadian Arcade!
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #19 on: October 07, 2015, 01:42:38 pm »
Ok, thats pretty ---smurfing--- cool. :)  I dig the bright neon colours and the logo at the top which I'm assuming will flank the 3D marque quite nicely.

 :cheers:

vwalbridge

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2079
  • Last login:March 29, 2019, 12:10:53 pm
  • Don't half-ass two things, whole-ass one thing.
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #20 on: October 07, 2015, 01:48:41 pm »
That artwork is very nice. However, that silhouette of PAC-MAN on the left Tron cycle seems out of place but it is subtle. Did you specifically want that there?
If you can read this, it means Photobucket's money grab ruined my signature photos.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #21 on: October 07, 2015, 02:11:09 pm »
That artwork is very nice. However, that silhouette of PAC-MAN on the left Tron cycle seems out of place but it is subtle. Did you specifically want that there?

I thought that at first (I'm a no character on the art guy) but I think it works in this concept for a few reasons.  The concept is that the cabinet is like Flynn's arcade (the building).  Inside is where gaming happens.  The stuff on the CP is meant to represent things inside the arcade.  If you look closely, you will see they are actually neon signs you could find in an arcade.  Pac man is one of them. 
« Last Edit: October 14, 2015, 07:11:23 pm by StefR »

vwalbridge

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2079
  • Last login:March 29, 2019, 12:10:53 pm
  • Don't half-ass two things, whole-ass one thing.
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #22 on: October 07, 2015, 02:18:17 pm »
That artwork is very nice. However, that silhouette of PAC-MAN on the left Tron cycle seems out of place but it is subtle. Did you specifically want that there?

I thoughts that at first (I'm a no character on the art guy) but I think it works in this concept for a few reasons.  The concept is that the cabinet is like Flynn's arcade (the building).  Inside is where gaming happens.  The stuff on the CP is meant to represent things inside the arcade.  If you look closely, you will see they are actually neon signs you could find in an arcade.  Pac man is one of them.

Right on. It's tastefully done. Just checking.  ;)
If you can read this, it means Photobucket's money grab ruined my signature photos.

melvinbates

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 104
  • Last login:May 06, 2019, 05:02:04 pm
  • Another day in paradise
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #23 on: October 08, 2015, 02:40:48 pm »
StefR, what program did you use to model the 3d printed letters?  Did you have to place all the el-wire holders manually?  Very impressive overall.  Can't wait to see it finished.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #24 on: October 08, 2015, 02:45:09 pm »
StefR, what program did you use to model the 3d printed letters?  Did you have to place all the el-wire holders manually?  Very impressive overall.  Can't wait to see it finished.

All done in sketchup and printed with cura.  Each letter is one piece including the elwire brackets.  I designed the elwire brackets so they snap in nicely without breaking.  Took a few iterations.  The 3D files are posted on thingiverse if you want to check out the model.  This approach was inspired from a 1/3 scale some dude designed out of metal.  He has a thread on pinside for those interested in larger replicas.

https://pinside.com/pinball/forum/topic/flynns-arcade-sign-13-scale-for-my-gameroom

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2531
  • Last login:September 24, 2019, 03:08:38 pm
  • SHMUP'EM
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #25 on: October 08, 2015, 05:09:40 pm »
Am I just OCD?

WHY O WHY are those admin buttons NOT CENTERED!


StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #26 on: October 08, 2015, 05:26:13 pm »
Am I just OCD?

WHY O WHY are those admin buttons NOT CENTERED!

That was the initial version where I was trying to have the spinner in an area where you can get your hands through and not be bothered by the joysticks.  I built a mockup and didn't like it so I changed it in the latest rev.  The final version only has a spinner in the middle with no buttons.  The two joysticks are now a bit further apart leaving more room to access the spinner.  Top left has 1P / 2P buttons and top right has 2 ctrl buttons.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #27 on: October 09, 2015, 04:43:21 pm »
Cab is coming along nicely although everything seems to take 4 times longer than I had planned.  Oh well.

My CP is angled and will have T molding on.  Today's headache was figuring out how to do an angled T molding slot.  I don't have the angle jig for my router and didnt feel like spending 60$ and waiting a couple days to get it.  Bah, nothing you can't solve with a 3D printer.  Built myself a jig at the exact angle I needed and bolted it on the router.  Worked like a charm.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #28 on: October 13, 2015, 05:21:09 pm »
Received the side art, marquee and CP vinyl printouts today!  Thanks to Lucian045 for the super quick turnaround.  I can't wait to put it on but I am not quite there yet.  Time to pick the T-molding color.  Sucks that there is no suitable orange available.


gbeef

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 325
  • Last login:October 22, 2018, 03:32:26 pm
    • arcadepix.com
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #29 on: October 14, 2015, 11:59:09 am »
It printed out awesome. You can go with either yellow, orange or red. I think your pretty safe. Cant wait to see it all together. :cheers:



My cabs
4 Player Arcade
X-men Arcade Remixed
My Pin Cab Attack of the PINZ cab
My Racing Cabinet Cab [URL=http://forum.arcadecontrols.com/index.php?topic=

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #30 on: October 14, 2015, 03:28:40 pm »
It printed out awesome. You can go with either yellow, orange or red. I think your pretty safe. Cant wait to see it all together. :cheers:

The wife and kids seem to think the gold and silver ones look best.  I'm not convinced so I think I will wait until everything is on the cab and then take a second look at T molding colors.

BGoulette

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 183
  • Last login:November 13, 2019, 04:23:37 pm
    • lazerjoose.com
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #31 on: October 14, 2015, 03:31:27 pm »
The wife and kids seem to think the gold and silver ones look best.  I'm not convinced so I think I will wait until everything is on the cab and then take a second look at T molding colors.

Just in case you weren't aware, the gold/silver are actually a type of foil or film laminated onto an otherwise semi-clear length of t-molding, meaning if it takes too many bumps or scrapes, rather than just a gouge, you'd have some "un-gold" or "un-silver" spots. It does look cool, that's for sure, but something worth bearing in mind.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #32 on: October 14, 2015, 03:35:49 pm »
Just in case you weren't aware, the gold/silver are actually a type of foil or film laminated onto an otherwise semi-clear length of t-molding, meaning if it takes too many bumps or scrapes, rather than just a gouge, you'd have some "un-gold" or "un-silver" spots. It does look cool, that's for sure, but something worth bearing in mind.

Thanks, I didn't realize that.  I will do some stress test on the bits I have here.  There will be kids playing the thing and it will get some abuse (as it should) so I will have to bear that in mind.
« Last Edit: October 14, 2015, 03:47:18 pm by StefR »

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #33 on: October 14, 2015, 03:36:22 pm »
Put on the first coat of black paint today.  While its drying, I started designing the marquee bracket and the bracket that will hold the neon sign.  I knew I was in for some fun when I decided to go with a curved marquee.  Couldn't help it and had to test the fit of the neon sign.  Fits like a glove.

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2531
  • Last login:September 24, 2019, 03:08:38 pm
  • SHMUP'EM
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #34 on: October 14, 2015, 03:41:27 pm »
In my best Vader voice.... "Impressive"

Vigo

  • the Scourage of Carpathia
  • Trade Count: (+24)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6131
  • Last login:Yesterday at 03:14:20 pm
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #35 on: October 14, 2015, 05:14:05 pm »
Haven't had a chance to look at your thread until today. Enjoying this build and your clever uses for 3d printing. Good innovation.  :cheers:

DudeRegular

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 275
  • Last login:November 04, 2019, 11:23:27 pm
  • I have no idea what I am doing
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #36 on: October 14, 2015, 09:52:04 pm »
Project is looking great man. The neon marquee is killer.

n3wt0n

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 535
  • Last login:October 09, 2019, 07:37:14 am
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #37 on: October 15, 2015, 06:47:00 am »
Great job so far! The marquee looks great and the artwork will pull it all together nicely. I am looking forward to seeing the finished results.  :applaud:

broberg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 75
  • Last login:September 28, 2018, 09:53:27 am
  • Less is More
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #38 on: October 15, 2015, 08:04:03 am »
Loving the sign, you should do a "brick" background behind it! :D
Building ---steaming pile of meadow muffin--- is fun!
Currently working on : Tron Desk, Kawasaki GPZ900R, Chevrolet S10 And Suzuki DR650

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #39 on: October 15, 2015, 09:45:05 am »
Loving the sign, you should do a "brick" background behind it! :D

Yes that's exactly the plan.  This was just a quick fit check and didn't have the marquee background installed.  You can see it in the pic of the printed artwork a few posts back.

broberg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 75
  • Last login:September 28, 2018, 09:53:27 am
  • Less is More
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #40 on: October 15, 2015, 09:49:09 am »
Loving the sign, you should do a "brick" background behind it! :D

Yes that's exactly the plan.  This was just a quick fit check and didn't have the marquee background installed.  You can see it in the pic of the printed artwork a few posts back.

Ha, it certainly was  :applaud: . Thats what happen when you read to fast :P
Building ---steaming pile of meadow muffin--- is fun!
Currently working on : Tron Desk, Kawasaki GPZ900R, Chevrolet S10 And Suzuki DR650

firedance

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 192
  • Last login:November 02, 2019, 02:31:32 am
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #41 on: October 16, 2015, 02:01:19 pm »
Awesome marquee  ;D

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #42 on: October 21, 2015, 09:59:19 pm »
Got the art applied to the CP today.  Tried different T-molding options and looks like orange will be the winner.  More to come.

Ian

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1055
  • Last login:November 03, 2019, 10:30:10 am
  • "A day without Laughter is a day wasted"
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #43 on: October 24, 2015, 10:48:08 am »
That Marquee is amazing... Any worries about it getting a bit hot?  :notworthy:
Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #44 on: October 24, 2015, 01:32:06 pm »
That Marquee is amazing... Any worries about it getting a bit hot?  :notworthy:

Not really.  This is EL wire, it doesn't use much power.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #45 on: October 24, 2015, 10:40:18 pm »
Very productive day today!  Got the side art, monitor and marquee installed.  I was freaking out about applying/cutting the vinyl but that ended up being pretty easy.  Test fitted a 3D printed curved marquee bracket and the neon sign.  Sorry for the crappy cell phone pics.  I'll use my good camera later on.

Ordered the T molding and buttons (all orange).  Decided to not use illuminated buttons.  Seems like everybody is using them these days but I felt like there was enough flashy things in there.  I tried a bunch of different models but the straight orange always seemed better. 

Measured the window dimensions about 20 times and will get quotes this week.  From my research, seems that the consensus is for dark tinted glass so I think I will go for that.

That was a long day, I need a drink...

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2531
  • Last login:September 24, 2019, 03:08:38 pm
  • SHMUP'EM
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #46 on: October 24, 2015, 10:44:36 pm »
 :applaud:

This is turning out to be a really nice build.

ChanceKJ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3137
  • Last login:November 14, 2019, 06:50:20 pm
  • Calgary, Ab, Canada.
    • The Canadian Arcade!
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #47 on: October 25, 2015, 12:10:36 am »
Save some money on the glass and go with dark tinted plexi. Trust me on this, i've done the homework. For the price, clarity, weight, and just all around, its like the only thing i would have done different. :)

I'm loving this build, those Orange buttons are going to look crazy on that CP.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #48 on: October 25, 2015, 09:05:10 am »
Save some money on the glass and go with dark tinted plexi. Trust me on this, i've done the homework. For the price, clarity, weight, and just all around, its like the only thing i would have done different. :)

I'm loving this build, those Orange buttons are going to look crazy on that CP.

Thanks for the tip.  The local glass shop I dealt with before does both glass and plexi so I will get a quote for both.  Not too concerned about weight as I gave that up when I went with MDF (never again).  Price, well, I stopped counting a while ago, as you probably all have at some point.  My goal is to get the best look and feel.  I never get a good feel when I look at raw acrylic sheets.  Feels cheap and plasticy.  Maybe its different when its tinted and installed in the cab?  There is something real about glass that I can't quite describe.  Although when you say you have done your homework, I totally believe you.

Yeah the orange works great after all.  Credit all goes to gbeef on that.  I was worried because the t-molding orange does not quite match the orange outline in the art.  It didn't look right in CAD but looks fine in reality.

CheffoJeffo

  • Cheffo's right! ---saint
  • Wiki Master
  • Trade Count: (+2)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7772
  • Last login:August 16, 2019, 09:30:14 am
  • Worthless button pusher!
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #49 on: October 25, 2015, 06:03:16 pm »
Save some money on the glass and go with dark tinted plexi. Trust me on this, i've done the homework. For the price, clarity, weight, and just all around, its like the only thing i would have done different. :)

For this cab (which looks awesome), I agree with Chance.

OTOH (and for folks who may find this thread by searching for the choice of glass vs plexi), I'll offer my rationale. For instances where the monitor is near a vertical mount and there is no trackball prone to "Golden Tee swoosh" play, I think plexi is a good choice (just be sure to clean it properly so you don't get scratches). If, however, you have a monitor mounted at 60 degrees or less, or have controls that may end up with hands running off the CP, go with a good tempered glass. All in MPO.

Marquee is gorgeous, as is the artwork. I love bold accents, so orange is a great choice.

 :applaud:
Working: Not Enough
Projects: Too Many
Progress: None

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2531
  • Last login:September 24, 2019, 03:08:38 pm
  • SHMUP'EM
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #50 on: October 25, 2015, 07:36:51 pm »
Maybe yous guys know where to go for cheap plexi, but I had a 25 1/2 x 26 1/2 price of smoked tempered glass cut at my local glass shop for $26 bucks.

A sheet of even acrylic big enough to span that is more than that and I imagine plexi is even more spendy.

Just saying....

ChanceKJ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3137
  • Last login:November 14, 2019, 06:50:20 pm
  • Calgary, Ab, Canada.
    • The Canadian Arcade!
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #51 on: October 25, 2015, 09:16:20 pm »
I think, all said and done I paid close to $200 Canadian for the sheet of glass on my Flynns from OneDayGlass.com. Not that I'm into restoring old cabs instead of building them I'm finding plexi is more then adequate. I do notice a couple small clarity issues in the glass. Caused me to flip and rotate it a couple times. 

For my DKU I picked up some plexi from a local plastics shop for $30 Canadian. Cheaper, lighter, better clarity, and just all around better.  Also, these cabs are for home use. Remember, companies like Nintendo used smoke plexi for their actual machines.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #52 on: October 25, 2015, 09:40:32 pm »
I am now stuck waiting for parts so, in the meantime, I started setting up the software.  I ran tests on a few games today and am reconsidering my choice of a vertical monitor.  I find horizontal games look rather small.  I knew this going in but it felt worse than I expected.  I also found that vertical games end up huge, not necessarily in a good way due to their low resolution.  Luckily, I have a 16:10 24" LCD so I ran some side by side tests.  I think I will go back to horizontal with a 16:10.  My main worry with it is if it dies, it will be hard to replace.  Would be interested to hear what you pros think.

CheffoJeffo

  • Cheffo's right! ---saint
  • Wiki Master
  • Trade Count: (+2)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7772
  • Last login:August 16, 2019, 09:30:14 am
  • Worthless button pusher!
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #53 on: October 25, 2015, 10:34:17 pm »
Also, these cabs are for home use. Remember, companies like Nintendo used smoke plexi for their actual machines.

My personal preference -- when I have the choice -- is glass. Nothing looks better. Having said that, plexi is fine and cheaper... right up until it is scratched. Then it is ---steaming pile of meadow muffin---. But then again, tempering is expensive and if you've ever set a sheet of tempered glass down wrong, even more expensive.

Properly cared for (as you say, home use ... just clean it properly), and in a configuration that doesn't leave it prone to scratched, plexi is fine. I have two Atari cabs (dating from 1976 and 1979), both with original plexi that still look great. And my Ninty, while not really a poster boy for quality cab construction, still has original smoked plexi and looks fine.

EDIT: I wasn't clear about the plexi on my old cabs -- all of them were in-arcade and then on-route machines and the plexi is still nice.
Working: Not Enough
Projects: Too Many
Progress: None

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #54 on: October 26, 2015, 11:51:41 am »
Just got quotes.  Regular tinted glass 62$, plexi 95$ and graylite 14 glass 108$.  I wouldn't call plexi cheap at this point.  I will try a couple other vendors just in case.

dbhjed

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:July 14, 2016, 12:15:57 pm
  • I play for the memories, not perfection
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #55 on: October 26, 2015, 11:14:09 pm »
That Marquee is amazing! Any plans on using EL Wire to make it more TRONy or is this pure arcade look?

ChanceKJ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3137
  • Last login:November 14, 2019, 06:50:20 pm
  • Calgary, Ab, Canada.
    • The Canadian Arcade!
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #56 on: October 26, 2015, 11:15:03 pm »
If you are going for quotes on glass, make sure it's tempered. Seriously.  :-\

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2531
  • Last login:September 24, 2019, 03:08:38 pm
  • SHMUP'EM
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #57 on: October 26, 2015, 11:19:05 pm »
If you are going for quotes on glass, make sure it's tempered. Seriously.  :-\

No doubt!

Does Canada not have places that are full service glass shops that do everything from windows and windshields  to tabletops and skylights?

Or are the prices your talking in Canadian dollars?

ChanceKJ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3137
  • Last login:November 14, 2019, 06:50:20 pm
  • Calgary, Ab, Canada.
    • The Canadian Arcade!
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #58 on: October 26, 2015, 11:20:50 pm »
Canada has a lot of things.  However for some strange reason I chose to go with OneDayGlass.com.  ...maybe their marketing got to me?? I can't for the life of me remember why I didn't go local.

I should have done plexi tho. Meh.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #59 on: October 27, 2015, 07:21:16 am »
If you are going for quotes on glass, make sure it's tempered. Seriously.  :-\

For sure, I only got quotes for tempered.
« Last Edit: October 27, 2015, 07:43:02 am by StefR »

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #60 on: October 27, 2015, 07:24:59 am »
That Marquee is amazing! Any plans on using EL Wire to make it more TRONy or is this pure arcade look?

The neon sign is already made with elwire and i think adding more will just make it too crowded.  Sometimes less is more in my opinion.  It will be backlit though.  Made some test with my phone flashlight behind it and it looked great so i will add  that.  There will also be led strips between the 2 layer kickplate like Ond's Metropolis.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #61 on: October 27, 2015, 11:09:04 am »
Canada has a lot of things.  However for some strange reason I chose to go with OneDayGlass.com.  ...maybe their marketing got to me?? I can't for the life of me remember why I didn't go local.

I should have done plexi tho. Meh.

Just found #2074 (dark grey) plexi for 28$ in Toronto (20$ shipping).  Almost too good to be true.  At that price, I will give plexi a shot.  If I don't like it, I can always go back to glass. For those in Canada, found this at plasticworld.ca
« Last Edit: October 27, 2015, 11:11:17 am by StefR »

Aceldamor

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 878
  • Last login:October 25, 2019, 05:10:51 pm
  • You know you hear the music in your head...
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #62 on: October 27, 2015, 12:01:36 pm »
I've used http://delviesplastics.com/ before. Good peeps.
Fuzzy Wuzzy was a woman!

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #63 on: October 27, 2015, 07:30:05 pm »
Received my LED strips today so finished the Marquee.  I'm pretty happy with that.  Here is how it looks in the dark.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #64 on: October 27, 2015, 07:35:31 pm »
Received my LED strips today so finished the Marquee.  I'm pretty happy with that.  Here is how it looks in the dark.
Hmmmm.... I thought the individual letter were going to be lit.
***Build what you dig, bro. Build what you dig.***

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #65 on: October 27, 2015, 07:42:02 pm »
Received my LED strips today so finished the Marquee.  I'm pretty happy with that.  Here is how it looks in the dark.
Hmmmm.... I thought the individual letter were going to be lit.

not sure what you mean, they are lit.  Each letter is made with EL wire

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #66 on: October 27, 2015, 07:44:14 pm »
Received my LED strips today so finished the Marquee.  I'm pretty happy with that.  Here is how it looks in the dark.
Hmmmm.... I thought the individual letter were going to be lit.

not sure what you mean, they are lit.  Each letter is made with EL wire
Okay, let me rephrase that. What are the white lights I see behind the letters? What is the purpose?
***Build what you dig, bro. Build what you dig.***

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #67 on: October 27, 2015, 07:59:03 pm »
Received my LED strips today so finished the Marquee.  I'm pretty happy with that.  Here is how it looks in the dark.
Hmmmm.... I thought the individual letter were going to be lit.

not sure what you mean, they are lit.  Each letter is made with EL wire
Okay, let me rephrase that. What are the white lights I see behind the letters? What is the purpose?

Each letter is a piece of 3D printed plastic which includes standoff posts to hold the el wire (all white).  A few posts back there are pics of the assembly that might help clarify.  The sign is held by a 3D printed frame (white).  This whole assembly sits in front of a curved marquee (brick texture, see pic) with an LED strip behind it.  I guess the crappy cell phone pic isnt that clear.  Once this is more finished I'll take out my SLR and get some good HDR shots.  I'm just lazy :)

I'm starting to think I should have made the letters and the frame black but I don't even want to think about redoing it at this stage.  Maybe later.

[edit] Looking at it again, I think you might be referring to the clips that hold the elwire.
« Last Edit: October 27, 2015, 08:01:28 pm by StefR »

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #68 on: October 27, 2015, 08:01:45 pm »
I think the letters themselves look cool. I guess I just thought that those would be the only thing lit, almost like neon. The white threw me off. Yes, can't wait to see the SLR photos.
***Build what you dig, bro. Build what you dig.***

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #69 on: October 27, 2015, 08:05:31 pm »
I think the letters themselves look cool. I guess I just thought that those would be the only thing lit, almost like neon. The white threw me off. Yes, can't wait to see the SLR photos.

They actually do look like neon.  Its just hard to capture with a camera.  It even makes a nice faint buzzing sound just like real neon.  I tried with and without the background led strips and it definitely looks better with it.

markc74

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 745
  • Last login:Today at 09:34:40 am
  • Trademarking 2Up. I'll be RICH. Bwah-ha-ha
    • forum.arcadecontrols.com/index.php/topic,137295.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #70 on: October 27, 2015, 08:43:19 pm »
Meh.

Just kidding. That looks bloody awesome!  :applaud:

opt2not

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5631
  • Last login:Today at 11:51:16 am
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #71 on: October 27, 2015, 08:58:04 pm »
If the UCA's have a category for best Flynn's cabinet, so far this one takes it!  :D
Fricken' love that marquee!  :cheers:

BorgDog

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 436
  • Last login:Yesterday at 11:09:31 am
  • Not a hipster for over 50 years!
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #72 on: October 28, 2015, 01:19:28 pm »
Very impressive indeed!    Awesome concept, great execution.   :applaud:  :notworthy:

Any thought to putting solid walls around the letters like it appears the original had, or at least it looks that way in the pic you posted, I think it would help give the letters more definition. Also, it may just be the picture, but the white looks a little bright to me.
My Projects:
MisSpent Youth a Vigolix bartop,  Little Bastard a rotating tablet/display bartop,
Pin-Dog a mini pin-cab on vpforums.org  Star Wars a wedgehead pincab on vpinball.com

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #73 on: October 28, 2015, 02:00:49 pm »
Very impressive indeed!    Awesome concept, great execution.   :applaud:  :notworthy:

Any thought to putting solid walls around the letters like it appears the original had, or at least it looks that way in the pic you posted, I think it would help give the letters more definition. Also, it may just be the picture, but the white looks a little bright to me.

There are no walls but there is a white background on each letter which achieves that.  Its just hard to see in the pics because of the poor dynamic range of the camera.  Same for the background light.  It looks pretty good in person but I can't same to take a good picture of it.

reptileink

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 523
  • Last login:November 05, 2019, 09:28:36 pm
  • An 8 bit hero
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #74 on: October 29, 2015, 01:56:48 pm »
I think the brick texture is what's throwing my eye. If it was plain white I think it would look better. Not that it looks bad, mind you. I think it looks awesome, but the blue strips behind the letters kinda make my eye buggy...lol.

I'll reserve more comments when I see the HDR pictures. Loving this build, the artwork is FAN-TAS-TIC as well! Can't wait to see the orange buttons.  :applaud:

~Building Arcade Cabinets are like raising children, you always mess up your first~

ChanceKJ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3137
  • Last login:November 14, 2019, 06:50:20 pm
  • Calgary, Ab, Canada.
    • The Canadian Arcade!
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #75 on: October 29, 2015, 03:19:47 pm »
Agreed, if it were me, I wouldn't light the back section and just have the 3D part lit up.

Still, this is so cool.  It makes the neon sign I wanted to have made for a bartop project look like dog ---steaming pile of meadow muffin---.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #76 on: October 29, 2015, 06:01:06 pm »
I think the brick texture is what's throwing my eye. If it was plain white I think it would look better. Not that it looks bad, mind you. I think it looks awesome, but the blue strips behind the letters kinda make my eye buggy...lol.

I'll reserve more comments when I see the HDR pictures. Loving this build, the artwork is FAN-TAS-TIC as well! Can't wait to see the orange buttons.  :applaud:

Yeah its the kind of thing you have to see in person.  I tried not lighting the background and it didnt quite work.  I can try and play with intensity of the background and make it more subtle.  Do you guys know if its safe to put electrical tape on some of the leds on these strips?  I would think so but they do heat up a bit.  Maybe there is another way to dim them down a bit?

I noticed the t molding and buttons have arrived but im on business travel right now.  Can wait to put this stuff on...

ChanceKJ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3137
  • Last login:November 14, 2019, 06:50:20 pm
  • Calgary, Ab, Canada.
    • The Canadian Arcade!
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #77 on: October 29, 2015, 07:28:27 pm »
In mine, I used less LED's, used them only where I wanted to light it, and added small pieces of colour gels from my Theater lighting swatch book :)

BlueGhost

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 36
  • Last login:November 15, 2019, 05:32:01 pm
  • I want to build my own arcade controls!
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #78 on: October 29, 2015, 08:56:30 pm »
A pulse width modulated (PWM) dimmer will work for your led strips.  If you're only worried about dialing in the level, and not flashing effects, you can pick up a simple PWM LED dimmer off ebay for under $5.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #79 on: October 29, 2015, 09:33:10 pm »
A pulse width modulated (PWM) dimmer will work for your led strips.  If you're only worried about dialing in the level, and not flashing effects, you can pick up a simple PWM LED dimmer off ebay for under $5.

Yeah i was trying to avoid the PWM route until im sure thats what i want.  These things are cheap but they take forever to show up since they come from China.  Ill block some and see if it looks better first.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #80 on: October 29, 2015, 09:44:20 pm »
Agreed, if it were me, I wouldn't light the back section and just have the 3D part lit up.

Still, this is so cool.  It makes the neon sign I wanted to have made for a bartop project look like dog ---steaming pile of meadow muffin---.

Dude, I have seen your work.  I am sure that whatever you come up with will look amazing.  If there is anything I can help with let me know.

ChanceKJ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3137
  • Last login:November 14, 2019, 06:50:20 pm
  • Calgary, Ab, Canada.
    • The Canadian Arcade!
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #81 on: October 30, 2015, 09:38:11 am »
Thanks!  However I'm 97% sure I've jettisoned that project in favour of a restoration.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #82 on: November 02, 2015, 10:00:17 am »
Made some progress this weekend.  Finished the CP (except for the missing T-molding), installed the coin door and the plexi.  I'll have to agree with Chance, the dark tinted plexi (#2074) looks fine to me.  Best 28$ I have spent.  We will see how it stands up to potential scratches but right now, I am very happy with how it looks. 

I used 3/16 plexi and I found that the scratch and snap technique did not work well for cutting it.  I had used this for the thinner lexan used on the marquee and CP and it had worked well.  The edge ended up not very nice and so I used my router to clean it up.  For thicker pieces, I would recommend snap cutting a bit longer and then trimming the excess with a router.  Hopefully that will help somebody in the future.

Next is T-molding and wire clean up inside.

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2531
  • Last login:September 24, 2019, 03:08:38 pm
  • SHMUP'EM
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #83 on: November 02, 2015, 10:20:17 am »
It looks bad ass dude.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #84 on: November 02, 2015, 10:21:17 am »
Made some progress this weekend.  Finished the CP (except for the missing T-molding), installed the coin door and the plexi.  I'll have to agree with Chance, the dark tinted plexi (#2074) looks fine to me.  Best 28$ I have spent.  We will see how it stands up to potential scratches but right now, I am very happy with how it looks. 

I used 3/16 plexi and I found that the scratch and snap technique did not work well for cutting it.  I had used this for the thinner lexan used on the marquee and CP and it had worked well.  The edge ended up not very nice and so I used my router to clean it up.  For thicker pieces, I would recommend snap cutting a bit longer and then trimming the excess with a router.  Hopefully that will help somebody in the future.

Next is T-molding and wire clean up inside.

I run my plexi through my table saw. Never had an issue cutting it.
***Build what you dig, bro. Build what you dig.***

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #85 on: November 02, 2015, 11:14:35 am »
Made some progress this weekend.  Finished the CP (except for the missing T-molding), installed the coin door and the plexi.  I'll have to agree with Chance, the dark tinted plexi (#2074) looks fine to me.  Best 28$ I have spent.  We will see how it stands up to potential scratches but right now, I am very happy with how it looks. 

I used 3/16 plexi and I found that the scratch and snap technique did not work well for cutting it.  I had used this for the thinner lexan used on the marquee and CP and it had worked well.  The edge ended up not very nice and so I used my router to clean it up.  For thicker pieces, I would recommend snap cutting a bit longer and then trimming the excess with a router.  Hopefully that will help somebody in the future.

Next is T-molding and wire clean up inside.

I run my plexi through my table saw. Never had an issue cutting it.

I was tempted to do that but I saw that you need a special blade or at least something with high tooth count.  The blade on my table saw is pretty crappy so I went the router way instead. 

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #86 on: November 02, 2015, 11:27:32 am »
Made some progress this weekend.  Finished the CP (except for the missing T-molding), installed the coin door and the plexi.  I'll have to agree with Chance, the dark tinted plexi (#2074) looks fine to me.  Best 28$ I have spent.  We will see how it stands up to potential scratches but right now, I am very happy with how it looks. 

I used 3/16 plexi and I found that the scratch and snap technique did not work well for cutting it.  I had used this for the thinner lexan used on the marquee and CP and it had worked well.  The edge ended up not very nice and so I used my router to clean it up.  For thicker pieces, I would recommend snap cutting a bit longer and then trimming the excess with a router.  Hopefully that will help somebody in the future.

Next is T-molding and wire clean up inside.

I run my plexi through my table saw. Never had an issue cutting it.

I was tempted to do that but I saw that you need a special blade or at least something with high tooth count.  The blade on my table saw is pretty crappy so I went the router way instead.
I've used both a laminate blade, and more recently a blade meant for ripping plywood, & I didn't have issues with either. If you have any scraps left over, you could always experiment. :Cheers:
***Build what you dig, bro. Build what you dig.***

Vigo

  • the Scourage of Carpathia
  • Trade Count: (+24)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6131
  • Last login:Yesterday at 03:14:20 pm
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #87 on: November 02, 2015, 11:30:53 am »
I can't count how many times I have used the wrong blade for the job because of sheer laziness to change it out. I have usually been pleasantly surprised that my lack of motivation didn't make a real difference.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #88 on: November 02, 2015, 11:32:57 am »
I can't count how many times I have used the wrong blade for the job because of sheer laziness to change it out. I have usually been pleasantly surprised that my lack of motivation didn't make a real difference.

Good to know.  I didn't want to take a chance since I knew the router would do a nice job.  I'll play with the left overs and see how it comes out.

opt2not

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5631
  • Last login:Today at 11:51:16 am
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #89 on: November 02, 2015, 03:09:14 pm »
I think the Marquee section looks great man.  :applaud:
I wouldn't remove the brick texture at all, since it is part of that industrial look of where it comes from. What I would do is edit it a bit so that the highlights are a bit more toned down.  The issue I see with it currently is that the "whites" are being too lit-up, and is being washed-out by the back-lighting. If you toned that down a bit it wouldn't be so pronounced and would allow the Flynn part to stand on it's own.


StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #90 on: November 02, 2015, 04:51:58 pm »
I think the Marquee section looks great man.  :applaud:
I wouldn't remove the brick texture at all, since it is part of that industrial look of where it comes from. What I would do is edit it a bit so that the highlights are a bit more toned down.  The issue I see with it currently is that the "whites" are being too lit-up, and is being washed-out by the back-lighting. If you toned that down a bit it wouldn't be so pronounced and would allow the Flynn part to stand on it's own.

Thats kind of what i am thinking.  My first crack at it will be to dim the backlight.  I just need to finish all the rewiring before i can get to trying it.

ChanceKJ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3137
  • Last login:November 14, 2019, 06:50:20 pm
  • Calgary, Ab, Canada.
    • The Canadian Arcade!
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #91 on: November 02, 2015, 10:29:03 pm »
 :cheers: love it!!

I had mixed results cutting with the scratch method at first when I went to make my marquee backing. Then I realized the trick for me was too use a REALLLLY sharp blade and cut a deep grove by giving it a couple passes, then I clamped it to the edge of my kitchen island and some scrap MDF to make a nice clean break.

Awesome job so far. :D

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2194
  • Last login:October 28, 2019, 06:03:11 pm
  • If you don't try, you have no chance at innovation
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #92 on: November 04, 2015, 11:57:27 am »
T-Molding....

Might want to look into this, t-molding.com

   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #93 on: November 04, 2015, 12:38:44 pm »
T-Molding....

Might want to look into this, t-molding.com


Stay classy, Rodney.
***Build what you dig, bro. Build what you dig.***

tomstewdevine

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 257
  • Last login:June 08, 2017, 12:30:37 pm
  • Comics, Arcade, Family....... in that order.
    • A Comic Book Look
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #94 on: November 04, 2015, 12:39:32 pm »
T-Molding....

Might want to look into this, t-molding.com



...and on the other hand you might not want to.
Finished: 2 bartops and a cocktail
Not-Finished: 1bartop, 2cocktails, and 2 stand ups.

markc74

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 745
  • Last login:Today at 09:34:40 am
  • Trademarking 2Up. I'll be RICH. Bwah-ha-ha
    • forum.arcadecontrols.com/index.php/topic,137295.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #95 on: November 04, 2015, 12:47:35 pm »
Might be just me but that looks like it might be a nightmare to install in a cab with any angles in it. From what I've read you apply the molding and then thread it through?

Surely there's a Build-Your-Own-Christmas-Tree forum for this sort of thing?  >:D

PS. Get off my lawn

PPS. Cab looks great. I've mentioned it before but thought it was worth mentioning again  ;D
« Last Edit: November 04, 2015, 12:50:29 pm by markc74 »

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2194
  • Last login:October 28, 2019, 06:03:11 pm
  • If you don't try, you have no chance at innovation
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #96 on: November 04, 2015, 01:12:35 pm »
Read the last line, EL wire, last I looked EL wire blue looks like tron blue illuminations, EL wire is way more flexible.

Reading is key, but i'm sure the picture just crayoned everybody in didnt it.

Whats funny is the OP innovated a new way to do marquees (which is pretty damn cool), not the standard marquee, but can be deemed Christmas-treeish.

Yep lets not look at other things people, lets keep it BORING.......






« Last Edit: November 04, 2015, 01:45:58 pm by rablack97 »
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

Aceldamor

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 878
  • Last login:October 25, 2019, 05:10:51 pm
  • You know you hear the music in your head...
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #97 on: November 04, 2015, 01:45:12 pm »
Read the last line, EL wire, last I looked EL wire blue looks like tron blue illuminations, EL wire is way more flexible.

Reading is key, but i'm sure the picture just crayoned everybody in didnt it.

Whats funny is the OP innovated a new way to do marquees, not the standard marquee, but can be deemed Christmas-treeish.

Yep lets not look at other things people, lets keep it BORING.......



Fuzzy Wuzzy was a woman!

markc74

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 745
  • Last login:Today at 09:34:40 am
  • Trademarking 2Up. I'll be RICH. Bwah-ha-ha
    • forum.arcadecontrols.com/index.php/topic,137295.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #98 on: November 04, 2015, 01:45:29 pm »
The marquee works because it re-imagines the original signage in the perfect place for the cabinet and therefore is a inspired addition that really adds to the theme of the cabinet.

My query was that if you had to thread the lights through the t-molding once installed then that looked like it could be problematic if there were any hard angles in the profile of the cabinet - having recently rewired some of my house I know how difficult threading anything through a small channel can be. Alternatively, if it was installed in the molding first then would it be damaged by the action of 'hammering' it into the groove. If EL wire is immune to these problems then great - I don't have any experience with it so it was a genuine question.

The Christmas tree reference was a joke hence the  >:D evil icon. Illuminated t-molding is not for me but whatever floats your boat  :cheers:





rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2194
  • Last login:October 28, 2019, 06:03:11 pm
  • If you don't try, you have no chance at innovation
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #99 on: November 04, 2015, 02:38:06 pm »
Read the last line, EL wire, last I looked EL wire blue looks like tron blue illuminations, EL wire is way more flexible.

Reading is key, but i'm sure the picture just crayoned everybody in didnt it.

Whats funny is the OP innovated a new way to do marquees, not the standard marquee, but can be deemed Christmas-treeish.

Yep lets not look at other things people, lets keep it BORING.......







The marquee works because it re-imagines the original signage in the perfect place for the cabinet and therefore is a inspired addition that really adds to the theme of the cabinet.

My query was that if you had to thread the lights through the t-molding once installed then that looked like it could be problematic if there were any hard angles in the profile of the cabinet - having recently rewired some of my house I know how difficult threading anything through a small channel can be. Alternatively, if it was installed in the molding first then would it be damaged by the action of 'hammering' it into the groove. If EL wire is immune to these problems then great - I don't have any experience with it so it was a genuine question.

The Christmas tree reference was a joke hence the  >:D evil icon. Illuminated t-molding is not for me but whatever floats your boat  :cheers:

It's EL Tape, wrong reference....i dont disagree with you on the complexity, my point was if he thought outside of the box for the marquee, this wasnt too far off from the same thought process....
« Last Edit: November 04, 2015, 02:41:48 pm by rablack97 »
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2194
  • Last login:October 28, 2019, 06:03:11 pm
  • If you don't try, you have no chance at innovation
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #100 on: November 04, 2015, 02:52:22 pm »
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

markc74

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 745
  • Last login:Today at 09:34:40 am
  • Trademarking 2Up. I'll be RICH. Bwah-ha-ha
    • forum.arcadecontrols.com/index.php/topic,137295.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #101 on: November 04, 2015, 03:11:18 pm »


Now I agree that does look amazing.

But then I have a far more serious problem. Spouse approval  :cheers:

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #102 on: November 04, 2015, 04:49:58 pm »
My first thought is to stay away from more lights on this thing and keep the focus on the marquee.  That's what made me go for regular buttons instead of illuminated.  That being said, I have learned multiple times on this build that I don't really know what I want until I try it and see how it looks.  Probably for that reason alone, I will give it a shot eventually.  Until then I will first install the regular orange T-Molding, if it could ever arrive...

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #103 on: November 04, 2015, 05:33:07 pm »
The centerpiece of this cab should be the marquee. That T molding? Not so much.

Besides, we already had a conversation about this T molding the other day. You must have missed it, my friend.
***Build what you dig, bro. Build what you dig.***

Vigo

  • the Scourage of Carpathia
  • Trade Count: (+24)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6131
  • Last login:Yesterday at 03:14:20 pm
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #104 on: November 04, 2015, 05:34:00 pm »
My first thought is to stay away from more lights on this thing and keep the focus on the marquee.  That's what made me go for regular buttons instead of illuminated.  That being said, I have learned multiple times on this build that I don't really know what I want until I try it and see how it looks.  Probably for that reason alone, I will give it a shot eventually.  Until then I will first install the regular orange T-Molding, if it could ever arrive...

I like your philosophy. If you feel it needs more, then you can always U-P-G-R-A-Y-E-D-D (spelt with two D's for a double dose of pimping.)


yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #105 on: November 04, 2015, 05:34:24 pm »

Yeah, but if you look closely at that T molding, you see a seam down the middle, so looks like two split pieces per side. Close, but no cigar.
***Build what you dig, bro. Build what you dig.***

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2194
  • Last login:October 28, 2019, 06:03:11 pm
  • If you don't try, you have no chance at innovation
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #106 on: November 04, 2015, 06:22:56 pm »
Thats how the older versions of EL tape were made for the 1/2" to 3/4", that pic is 5 yrs old.

They have advanced the design since then.





Plus you can control the intensity of the lighting, by dialing down the voltage, so that part would be subtle, not overwhelming.

Anyhow just an idea, just figured it tied the whole FLYNNS - TRON thing together.  The night shot would be really cool with the blue outlines then with Flynns lit up bright in the middle...

Couple that with another innovation in this build  :dunno

« Last Edit: November 04, 2015, 06:26:13 pm by rablack97 »
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #107 on: November 04, 2015, 06:25:52 pm »

Yeah, but if you look closely at that T molding, you see a seam down the middle, so looks like two split pieces per side. Close, but no cigar.

Agreed.  I am only considering the el tape option which wouldnt show dots or a seam (i would think).  I added rgb led strips between the layers on the kick plate and i am not sure i like seeing all the dots.  I might replace it with el tape.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #108 on: November 04, 2015, 06:46:37 pm »
Thats how the older versions of EL tape were made for the 1/2" to 3/4", that pic is 5 yrs old.

They have advanced the design since then.





Plus you can control the intensity of the lighting, by dialing down the voltage, so that part would be subtle, not overwhelming.

Anyhow just an idea, just figured it tied the whole FLYNNS - TRON thing together.  The night shot would be really cool with the blue outlines then with Flynns lit up bright in the middle...

Couple that with another innovation in this build  :dunno
Yeah, but that picture you used, that was this year, not 5 years ago.
***Build what you dig, bro. Build what you dig.***

ChanceKJ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3137
  • Last login:November 14, 2019, 06:50:20 pm
  • Calgary, Ab, Canada.
    • The Canadian Arcade!
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #109 on: November 04, 2015, 06:53:02 pm »
I love the EL tape look on that Tron, the spotty look of LED strips annoys me too. I was able to position my cab's led's creatively to give a more even "underglow" effect. Not something that can be done simply with LED strips.

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4307
  • Last login:November 15, 2019, 07:39:46 pm
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #110 on: November 04, 2015, 07:14:46 pm »
I was under the impression that the line on that Tron was due to using two thin pieces of EL Tape between the "T".  That was something I considered at one point which is where my assumption is coming from.  The version that T-molding.com should not have the line down the middle.

To me the focal point of this build is that amazing marquee.  I wouldn't add anything that distracts from it.


yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #111 on: November 04, 2015, 07:18:37 pm »
I was under the impression that the line on that Tron was due to using two thin pieces of EL Tape between the "T".  That was something I considered at one point which is where my assumption is coming from.  The version that T-molding.com should not have the line down the middle.

To me the focal point of this build is that amazing marquee.  I wouldn't add anything that distracts from it.
Totally agree. Anything more than that marquee light starts getting into Dave and Busters territory.
***Build what you dig, bro. Build what you dig.***

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #112 on: November 04, 2015, 07:27:10 pm »
Following my indecisive process of trying s**t before I know what I want, I ordered 1.5m of this stuff for 10 bucks.  I'll post back when I get it.  Usually takes a month to get stuff from Alibaba so I might be in the Christmas spirit when that shows up :)

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2194
  • Last login:October 28, 2019, 06:03:11 pm
  • If you don't try, you have no chance at innovation
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #113 on: November 04, 2015, 08:56:15 pm »
 :applaud:  finally someone willing to go beyond this



Just be careful, the stuff i saw on aliexpress, had the strip down the middle.

Not sure if you knew but aliexpress has alot more to offer on a consumer level in stead of a dealer, its alibaba's little brother.



My bad on the year mixup on this photo, that was this year, i had 2011 in my head for some reason.



« Last Edit: November 04, 2015, 09:00:06 pm by rablack97 »
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #114 on: November 04, 2015, 09:03:31 pm »
:applaud:  finally someone willing to go beyond this



Just be careful, the stuff i saw on aliexpress, had the strip down the middle.

Not sure if you knew but aliexpress has alot more to offer on a consumer level in stead of a dealer, its alibaba's little brother.



My bad on the year mixup on this photo, that was this year, i had 2011 in my head for some reason.


Yeah, but be careful or you'll end up with this...

***Build what you dig, bro. Build what you dig.***

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2531
  • Last login:September 24, 2019, 03:08:38 pm
  • SHMUP'EM
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #115 on: November 04, 2015, 09:04:58 pm »
Pimp my cab

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #116 on: November 04, 2015, 09:07:10 pm »
Rodney is my homeboy and I have a ton of respect for him, but I don't think this cab needs any MORE light. That marquee is awesome, and besides, Flynn's Arcade had more than just Tron inside.
« Last Edit: November 04, 2015, 09:10:45 pm by yotsuya »
***Build what you dig, bro. Build what you dig.***

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #117 on: November 04, 2015, 10:49:45 pm »
Rodney is my homeboy and I have a ton of respect for him, but I don't think this cab needs any MORE light. That marquee is awesome, and besides, Flynn's Arcade had more than just Tron inside.

Totally agree and that is the plan.  But I can't help to try stuff, especially when its cheap.  In the back of my mind, I am thinking of probably using the El tape to replace the LED strips I have on the kickplate.  I doubt I would end up using this as T molding but seems fun to try.

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2194
  • Last login:October 28, 2019, 06:03:11 pm
  • If you don't try, you have no chance at innovation
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #118 on: November 04, 2015, 11:02:53 pm »
Rodney is my homeboy and I have a ton of respect for him, but I don't think this cab needs any MORE light. That marquee is awesome, and besides, Flynn's Arcade had more than just Tron inside.


Yeah Paul is



It's not an argument bro, these are our opinions, the OP is gonna do what he wants at the end of day.  Does it neeeed it, probably not, but it doesn't hurt to try new stuff, cause you never know.

Who would of know a 3d printed marquee would be loved around here, but he tried it and it worked out well.  He might slap on the EL's and be like hell no, but then again, it might be damn that looks pretty sharp.

The marquee is a highlight for sure, but hey go all out if your gonna do it.....he has enough sense to pull idea if it looks like total ass.
« Last Edit: November 04, 2015, 11:07:36 pm by rablack97 »
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #119 on: November 04, 2015, 11:04:21 pm »
Rodney is my homeboy and I have a ton of respect for him, but I don't think this cab needs any MORE light. That marquee is awesome, and besides, Flynn's Arcade had more than just Tron inside.


Yeah Paul is



It's not an argument bro, these are our opinions, the OP is gonna do what he wants at the end of day.  Does it neeeed it, probably not, but it doesn't hurt to try new stuff, cause you never know.

Who would of know a 3d printed marquee would be loved around here, but he tried it and it worked out well.  He might slap on the EL's and be like hell no, but then again, it might be damn that looks pretty sharp.

The marquee is a highlight for sure, but hey go all out if your gonna do it.....he has enough since to pull idea if it looks like total ass.
***Build what you dig, bro. Build what you dig.***

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2194
  • Last login:October 28, 2019, 06:03:11 pm
  • If you don't try, you have no chance at innovation
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #120 on: November 04, 2015, 11:08:48 pm »
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4307
  • Last login:November 15, 2019, 07:39:46 pm
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #121 on: November 04, 2015, 11:21:31 pm »
 ;D

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2194
  • Last login:October 28, 2019, 06:03:11 pm
  • If you don't try, you have no chance at innovation
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #122 on: November 05, 2015, 12:46:13 am »


Group expanded
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4307
  • Last login:November 15, 2019, 07:39:46 pm
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #123 on: November 05, 2015, 09:57:49 am »
Hmmm....I foresee a Showdown occurring.


CheffoJeffo

  • Cheffo's right! ---saint
  • Wiki Master
  • Trade Count: (+2)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7772
  • Last login:August 16, 2019, 09:30:14 am
  • Worthless button pusher!
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #124 on: November 05, 2015, 11:03:26 am »
The centerpiece of this cab should be the marquee. That T molding? Not so much.

No.

Attention should be on the beautiful translite and the glorious joystick.

When I still planned on finishing my Tron restore, I wanted to change to glowing buttons and spinner dial. That's about the only pimping that makes sense on a cab that is already blinged-out.
Working: Not Enough
Projects: Too Many
Progress: None

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #125 on: November 05, 2015, 11:05:51 am »
The centerpiece of this cab should be the marquee. That T molding? Not so much.

No.

Attention should be on the beautiful translite and the glorious joystick.

When I still planned on finishing my Tron restore, I wanted to change to glowing buttons and spinner dial. That's about the only pimping that makes sense on a cab that is already blinged-out.

I love you, Cheffo, and I want to have your babies.
***Build what you dig, bro. Build what you dig.***

CheffoJeffo

  • Cheffo's right! ---saint
  • Wiki Master
  • Trade Count: (+2)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7772
  • Last login:August 16, 2019, 09:30:14 am
  • Worthless button pusher!
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #126 on: November 05, 2015, 11:46:52 am »
 ::)
Working: Not Enough
Projects: Too Many
Progress: None

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #127 on: November 07, 2015, 03:03:49 pm »
Got the T-molding on and made a few updates.  I like the orange and I don't think I will change it.  Lowered the intensity of the marquee backlight, seems to help.  Ongoing love hate relationship with Hyperspin but the thing is functional now.

Didn't take long to find people that wanted to play :)  Its weird to see my kids play these old games.


harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2531
  • Last login:September 24, 2019, 03:08:38 pm
  • SHMUP'EM
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #128 on: November 07, 2015, 03:12:48 pm »
 :applaud:

Very nice!

markc74

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 745
  • Last login:Today at 09:34:40 am
  • Trademarking 2Up. I'll be RICH. Bwah-ha-ha
    • forum.arcadecontrols.com/index.php/topic,137295.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #129 on: November 07, 2015, 03:14:05 pm »
Niiice. Photo makes the t molding look redder than I expected but that could be just my screen.

All it needs now is some illu... Nah. I'm not gonna go there...  ;D

Is it finished? If it is change the post subject to say that so that peeps know.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #130 on: November 07, 2015, 03:52:59 pm »
That looks perfect the way it is. Great job.
***Build what you dig, bro. Build what you dig.***

BGoulette

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 183
  • Last login:November 13, 2019, 04:23:37 pm
    • lazerjoose.com
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #131 on: November 07, 2015, 03:55:38 pm »
Yeah, this is looking awesome! The marquee backlight still seems a touch bright, like the value is similar to the FLYYN'S, but it might just be exposure compensation, too. Looks great!

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #132 on: November 07, 2015, 04:48:54 pm »
Niiice. Photo makes the t molding look redder than I expected but that could be just my screen.

All it needs now is some illu... Nah. I'm not gonna go there...  ;D

Is it finished? If it is change the post subject to say that so that peeps know.

You're right, the t molding keeps looking redder in pictures.  That's what caused my concerns with it in the first place.  Looks bright orange in reality and fits nicely with the art.

Its not quite finished although most of the remaining work is under the hood.  I will post some nicer pics and re-label the thread once its complete.

ChanceKJ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3137
  • Last login:November 14, 2019, 06:50:20 pm
  • Calgary, Ab, Canada.
    • The Canadian Arcade!
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #133 on: November 07, 2015, 08:22:31 pm »
It's hard to photograph bright orange. I've been a McLaren fan since I was a kid and never realized how neon the "Rocket Red" on their f1 cars really was until I went to my first race in 2012.

Looks good! Seriously jealous of the marquee.  :cheers:

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #134 on: November 09, 2015, 11:19:37 am »
I didn't like the exposed edge between the top of the CP and the window so I designed a little custom plastic trim to go there.  I 3D printed it in 4 parts and used black vinyl wrap to turn it into a single piece.  Doesn't look too bad.


StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another Flynn's Arcade!
« Reply #135 on: November 09, 2015, 11:33:30 am »
Ok, I am calling it.  I have some ideas for things I'd like to change but Rev 1 is complete.  Here is a collection of pics attempting to cover different lighting conditions.  Haven't been able to cover the whole dynamic range but I hope this gives you an idea of how it turned out.

Vigo

  • the Scourage of Carpathia
  • Trade Count: (+24)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6131
  • Last login:Yesterday at 03:14:20 pm
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #136 on: November 09, 2015, 11:39:43 am »
 :applaud:  Great build! Excellent innovation and clever new use of 3d printing. Great tempering your build features to make it flashy, but not dizzying.

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2531
  • Last login:September 24, 2019, 03:08:38 pm
  • SHMUP'EM
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #137 on: November 09, 2015, 11:41:22 am »
Agreed Vigo, he did fine work.

Make sure you post in the "I completed my project" thread.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #138 on: November 09, 2015, 11:42:01 am »
Yeah, ignore temptation to add more light. Great job. Best not-really-a-Flynn-clone Flynn clone ever. :cheers:
***Build what you dig, bro. Build what you dig.***

tomstewdevine

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 257
  • Last login:June 08, 2017, 12:30:37 pm
  • Comics, Arcade, Family....... in that order.
    • A Comic Book Look
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #139 on: November 09, 2015, 11:44:25 am »
Man this Arcade turned out so cool.
Finished: 2 bartops and a cocktail
Not-Finished: 1bartop, 2cocktails, and 2 stand ups.

ZexisStryfe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 108
  • Last login:October 20, 2018, 12:22:09 am
  • Evolution has begun...
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #140 on: November 09, 2015, 02:39:58 pm »
Fantastic job! I love the marquee and the overall esthetic of the cabinet.

GSXRMovistar

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 435
  • Last login:October 24, 2019, 05:32:19 pm
  • Gez, this is gonna be expensive!
    • forum.arcadecontrols.com/index.php/topic,148135.0.html
    • CoffeeCade
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #141 on: November 09, 2015, 03:06:25 pm »
Looks great, well done.

Brouhaha

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 72
  • Last login:March 08, 2019, 10:30:04 am
  • Learning as I go!
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #142 on: November 09, 2015, 03:09:31 pm »
Awesome marquee for an awesome build! Congrats!

gbeef

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 325
  • Last login:October 22, 2018, 03:32:26 pm
    • arcadepix.com
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #143 on: November 09, 2015, 04:09:35 pm »
Looking awesome, really nice clean build. That marquee  :cheers: and love the lighting options.
This was a fun project to work on for sure. You killed it
« Last Edit: November 09, 2015, 04:11:07 pm by gbeef »


My cabs
4 Player Arcade
X-men Arcade Remixed
My Pin Cab Attack of the PINZ cab
My Racing Cabinet Cab [URL=http://forum.arcadecontrols.com/index.php?topic=

ChanceKJ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3137
  • Last login:November 14, 2019, 06:50:20 pm
  • Calgary, Ab, Canada.
    • The Canadian Arcade!
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #144 on: November 09, 2015, 04:29:46 pm »
That orange lighting on the front just makes me think of a Recognizer. Good job!  :cheers:

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2194
  • Last login:October 28, 2019, 06:03:11 pm
  • If you don't try, you have no chance at innovation
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #145 on: November 09, 2015, 04:31:46 pm »
Yeah, ignore temptation to add more light. Great job. Best not-really-a-Flynn-clone Flynn clone ever. :cheers:

Dammit man, it wasn't light it was soft ahmmmbianceee.
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #146 on: November 09, 2015, 04:34:09 pm »
Yeah, ignore temptation to add more light. Great job. Best not-really-a-Flynn-clone Flynn clone ever. :cheers:

Dammit man, it wasn't light it was soft ahmmmbianceee.

Doesn't need it. It's perfect the way it is. Any more lights and he may as well add a ticket dispenser to the sides. :cheers:
***Build what you dig, bro. Build what you dig.***

opt2not

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5631
  • Last login:Today at 11:51:16 am
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #147 on: November 09, 2015, 04:34:23 pm »
Yeah, ignore temptation to add more light. Great job. Best not-really-a-Flynn-clone Flynn clone ever. :cheers:
^ Agreed.  :applaud:

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #148 on: November 09, 2015, 04:36:40 pm »
Looking awesome, really nice clean build. That marquee  :cheers: and love the lighting options.
This was a fun project to work on for sure. You killed it

Thanks!  You did a fantastic job with the artwork.  All the people who have seen the cab loved it.

For those thinking of getting artwork done , I highly recommend gbeef.   He is one talented dude and has been great to work with.

StefR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:January 13, 2019, 03:49:36 pm
    • forum.arcadecontrols.com/index.php/topic,147459.0.html
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #149 on: November 09, 2015, 04:39:46 pm »
That orange lighting on the front just makes me think of a Recognizer. Good job!  :cheers:

Interesting, I never thought of it this way.  I kind of liked how it projects on the floor and matches the bottom of the side art (the orange glow).  My only issue right now, is I find it a bit bright and you can see the leds.  I might design some sort of diffuser.  Thats one item on the list of possible tweaks. 

Meh, right now I just want to play games for a bit...
« Last Edit: November 09, 2015, 09:45:52 pm by StefR »

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2194
  • Last login:October 28, 2019, 06:03:11 pm
  • If you don't try, you have no chance at innovation
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #150 on: November 09, 2015, 04:50:53 pm »
Yeah remove the temptation to take any more light away from it   >:D

Any less lighting, and you might as well call it PONG....
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #151 on: November 09, 2015, 05:15:04 pm »
Yeah remove the temptation to take any more light away from it   >:D

Any less lighting, and you might as well call it PONG....

Pong was a bad-ass cab for its time.

Too bad Liberace passed on, bro, you could have helped him build a cab!

***Build what you dig, bro. Build what you dig.***

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2194
  • Last login:October 28, 2019, 06:03:11 pm
  • If you don't try, you have no chance at innovation
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #152 on: November 09, 2015, 05:23:07 pm »
or live in the stone age and play tetris....



And yes i would have, dude was pizzzaid......

He's lookin at you like.


« Last Edit: November 09, 2015, 05:24:40 pm by rablack97 »
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #153 on: November 09, 2015, 05:24:35 pm »

And yes i would have, dude was pizzzaid......

True dat. He would have made it worth your while $$$.
***Build what you dig, bro. Build what you dig.***

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2194
  • Last login:October 28, 2019, 06:03:11 pm
  • If you don't try, you have no chance at innovation
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #154 on: November 09, 2015, 05:31:04 pm »
Just messing with the homie again.....

Your right bro its cool the way it is...........

   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

emphatic

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1949
  • Last login:May 22, 2018, 12:44:54 am
  • -"Suck it, Donny!" -"No, YOU suck it.... more".
    • Emphatic's Video Game Collection
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #155 on: November 09, 2015, 05:31:32 pm »
Hard to fault anything about this build. Good show. :cheers:

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18994
  • Last login:Today at 08:27:44 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Project Neon Flynn's
« Reply #156 on: November 09, 2015, 05:34:25 pm »
Just messing with the homie again.....

Your right bro its cool the way it is...........

:cheers:

This is a great example of an innovative modern cabinet that still retains a classic arcade feel. Personally, I don't consider it a clone of anything, nor do I see it as "yet another" anything as well (and I changed my subject title to reflect that). Nicely done. My favorite cab this year, by far.
***Build what you dig, bro. Build what you dig.***

tomstewdevine

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 257
  • Last login:June 08, 2017, 12:30:37 pm
  • Comics, Arcade, Family....... in that order.
    • A Comic Book Look
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #157 on: November 09, 2015, 05:34:56 pm »


Too bad Liberace passed on, bro, you could have helped him build a cab!



 :lol :lol :lol
Finished: 2 bartops and a cocktail
Not-Finished: 1bartop, 2cocktails, and 2 stand ups.

Plipi

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:March 26, 2019, 08:38:06 pm
  • I want to build my own arcade controls!
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #158 on: January 15, 2019, 10:50:13 am »
So I have been reading this forum for years knowing that eventually I would finally decide to go ahead and build my own MAME machine.  Well today is the day.  Actually a few days ago but who's counting :)

Obviously, I have been inspired by the great contributors here.  Main inspiration includes:
- ChanceKJ's Flynn's Arcade: http://forum.arcadecontrols.com/index.php/topic,146068.0.html
- Project Mame: http://forum.arcadecontrols.com/index.php/topic,76150.0.html
- Ond Metropolis: http://forum.arcadecontrols.com/index.php/topic,118612.0.html


I read ChanceKJís thread last year with a lot of interest and really liked the idea of Flynnís arcade.  I especially focused on the arcade itself (the building) since it is the place where the gaming happens and has references to video games etc.  Anyways, I was toying with my new 3D printer back then and set on to try and make a replica of the Flynnís neon sign at the front.  I thought this could make for a pretty kickass marquee for an arcade cabinet.   I spend a few weeks designing and building it and was pretty happy with the results (see pics).  Thus I knew I was going to make Yet Another Flynnís Arcade!

While I absolutely love ChanceKJís design, I really wanted to make something much smaller.  I already have a pinball machine and space (read wife tokens) is limited.  So I settled on a 2 player system that would be fairly minimalistic.  I also wanted it to be well setup for Robotron and so sticks needed to be reasonably close to one another.  After searching for a while I found the Project Mame design which is pretty much what I am looking for.  I changed the marque area to be curved in order to match the neon sign and the Arcade building shape.  I also really like Ondís idea for the front part with LEDs so I added that in.  I changed the base to make it more rigid and used a design similar to ChanceKJís Flynn.  Below are some shots of the concept 3D model as it stands now.

More to come...


Hello, I am in the assembly of my first arcade machine, and I would like to make a replica of your Arcade. Could you share the measurements of the structure and the graphics to be able to print them?

Thank you so much

meduza

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 37
  • Last login:October 20, 2019, 09:45:42 pm
  • I want to build my own arcade controls!
    • LEDSpicer wiki
Re: Project Neon Flynn's: Yet Another COMPLETED Flynn's Arcade!
« Reply #159 on: January 30, 2019, 05:29:35 pm »
I love it!! amazing work!!  :applaud: