It looks like your router got away from you on your JLF mount but otherwise the case looks awesome. That is great!
Will the height of the control panel be adjustable in the four corners? It looks like some corners are lower than others.
I have a few tricks up my sleeve to fix the height so no worries. As far as the cutout, I tried my drill press on this top. Really it was because I was too lazy to take my router out of the table mount.

I wasn't too worried about the rough edges though because it will be covered with art and plexi. I can always cut another top.
I have another box ready for paint hopefully tonight and will do a better job on the top for this one. I may do a new top for the green box at the same time to fix that little error you so kindly pointed out.

Looking good! I still can't believe you are angling the sides for these things - they look very cool but must be a pain to build. I'm amazed how nice and smooth the finish looks once everything is patched, sanded and sprayed. It looks like it was made out of one piece. I never seem to get a perfect finish...
You guys have inspired me to try and build my own one day - the biggest hurdle for me will be soldering to a PS2/360 controller since I've never done that before...

Thanks javeryh. You would be surprised how much can be covered up with a good paint job.

I used spray cans for this job. 4 coats of primer, 6 coats of paint and 5 coats of lacquerer. I haven't even begun the polishing stage yet. This is not mirror perfect yet nor do I expect it to be, but I'll give it a good try.
TTFN
Kaytrim