Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Reunion joystick  (Read 1533 times)

0 Members and 1 Guest are viewing this topic.

karlpenney

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 29
  • Last login:June 04, 2020, 08:36:58 pm
Reunion joystick
« on: June 01, 2007, 08:41:50 am »
I received a ms pac reunion joystick which I thought was supposed to have base dimensions identical to the happ supers.  The distances between the mounting holes on this one are a bit different than my happ supers though.  The base has a little crown symbol stamped on it.  Anybody know who makes these?
Logged

shardian

  • Saint is the evil mastermind
  • Trade Count: (+23)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 9218
  • Last login:August 21, 2015, 03:11:31 pm
  • Friends don't let friends build frankenpanels...
Re: Reunion joystick
« Reply #1 on: June 01, 2007, 08:55:21 am »
Logged

karlpenney

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 29
  • Last login:June 04, 2020, 08:36:58 pm
Re: Reunion joystick
« Reply #2 on: June 01, 2007, 09:09:26 am »
No, it's not a Happ/IL joystick.  The base is a little different and the mounting holes don't quite line up with the ones for the Happ Supers.  I just did some more searching and I think this is the Betson version (www.betson.com/products/parts/IMP-47-9075-06).  Almost identical, but not quite.
Logged

Thenasty

  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4420
  • Last login:Yesterday at 12:02:52 pm
    • Thenasty's Arcademania Horizontal/Vertical monitor setup.
Re: Reunion joystick
« Reply #3 on: June 01, 2007, 09:22:29 am »
that crown is Betson/Imperial logo.
Logged
Thenasty's Arcademania Horizontal/Vertical setup.
http://forum.arcadecontrols.com/index.php?topic=26696.0

Free VGA Breakout Cable
http://forum.arcadecontrols.com/index.php?topic=38228.0

Ultimate All in One Coin Mech write up (Make your own)
http://forum.arcadecontrols.com/index.php?topic=19200.0

shardian

  • Saint is the evil mastermind
  • Trade Count: (+23)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 9218
  • Last login:August 21, 2015, 03:11:31 pm
  • Friends don't let friends build frankenpanels...
Re: Reunion joystick
« Reply #4 on: June 01, 2007, 12:16:32 pm »
Strange that they wouldn't use standard mounting holes. :dunno
Logged

shorthair

  • Guest
  • Trade Count: (0)
Re: Reunion joystick
« Reply #5 on: June 01, 2007, 04:27:00 pm »
Quote from: Thenasty on June 01, 2007, 09:22:29 am
that crown is Betson/Imperial logo.

ya, what I was going to say.
Logged

FrizzleFried

  • no one listens to me anyway.
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5146
  • Last login:July 24, 2025, 09:28:02 am
    • Idaho Garagecade
Re: Reunion joystick
« Reply #6 on: June 01, 2007, 07:55:28 pm »
Where did you buy it?

Logged
Visit my arcade blog at: www.idahogaragecade.com (Updated 10-28-21)
Pages: [1]
  
Go Up
« previous next »