Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Mounting coin-mechs  (Read 965 times)

0 Members and 1 Guest are viewing this topic.

Nyrine

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38
  • Last login:August 19, 2003, 02:43:06 pm
  • I'm a llama!
Mounting coin-mechs
« on: April 11, 2003, 07:34:13 am »
Hi there,

I have aquired some coin mechs via ebay, but thats all they are - just the mechs.

What else do I need to be looking out for, or buy new to get these mounted in a cab ?

Everything at Happ seems to have mechs included - is it possible to buy just the face plates does anyone know ? If so - where ?

Thanks !

Thenasty

  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4420
  • Last login:Yesterday at 10:11:22 am
    • Thenasty's Arcademania Horizontal/Vertical monitor setup.
Re:Mounting coin-mechs
« Reply #1 on: April 11, 2003, 08:31:46 am »
you need the box insert. Then you can place the coin mech along with the coin box. Look for Up/Down Coin Doors in ebay. Or you could be creative and make a slot in your cabinet and somehow mount the coin mech.
Thenasty's Arcademania Horizontal/Vertical setup.
http://forum.arcadecontrols.com/index.php?topic=26696.0

Free VGA Breakout Cable
http://forum.arcadecontrols.com/index.php?topic=38228.0

Ultimate All in One Coin Mech write up (Make your own)
http://forum.arcadecontrols.com/index.php?topic=19200.0