August 04, 2025, 02:42:09 am
Home
Help
Search
Login
Register
News:
Support this site
Shop
Amazon Video Games
through our link. Thank you!
Forum notices to gmail.com addresses are working. Microsoft addresses are still not.
The NEW Build Your Own Arcade Controls
|
Main
|
Main Forum
|
Only thing left on my cab is to fix the T-ball.. :(
Main
Restorations
Software
Audio/Jukebox/MP3
Everything Else
Buy/Sell/Trade
Project Announcements
Monitor/Video
GroovyMAME
Merit/JVL Touchscreen
Meet Up
Retail Vendors
Driving & Racing
Woodworking
Software Support Forums
Consoles
Project Arcade
Reviews
Automated Projects
Artwork
Frontend Support Forums
Pinball
Forum Discussion
Old Boards
Raspberry Pi & Dev Board
controls.dat
Linux
Miscellaneous Arcade
Wiki Discussion
Old Archives
Lightguns
Arcade1Up
Try the site in https mode
Site News
Unread posts
|
New Replies
|
Recent posts
|
Rules
|
Chatroom
|
Wiki
|
File Repository
|
RSS
|
Submit news
« previous
next »
Send this topic
Print
Pages: [
1
]
Go Down
Author
Topic: Only thing left on my cab is to fix the T-ball.. :( (Read 946 times)
0 Members and 1 Guest are viewing this topic.
s8n
Trade Count:
(
0
)
Full Member
Offline
Posts: 35
Last login:April 02, 2003, 06:12:12 pm
The Prince of Darkness
Only thing left on my cab is to fix the T-ball.. :(
«
on:
March 31, 2003, 08:44:01 pm »
my oscar spinner works fine, and the TB moves up and down, but dosent move in any other direction. i dont know what it could be, the axis' are wired fine, i think. im using an opti-pac, happ TB, winxp.
Logged
OSCAR
Trade Count:
(
0
)
Full Member
Offline
Posts: 1770
Last login:September 06, 2018, 11:31:53 pm
I think Bigfoot is blurry, that's the problem...
Re:Only thing left on my cab is to fix the T-ball.. :(
«
Reply #1 on:
March 31, 2003, 08:56:57 pm »
Did you try swapping the axis wires to see if you can isolate the problem to either a bad optic board or a broken wire in the harness? I picked up a brand new Happ trackball not long ago, and mine was doing the same thing. It turned out to be a broken wire in the harness that I didn't notice until I looked over all the wires very carefully.
If you swap the axis wires and the problem stays on the x-axis, then that could indicate a bad x-axis optic board. If the problem moves to the y-axis, then you could have a bad wire in the t'ball harness.
Logged
s8n
Trade Count:
(
0
)
Full Member
Offline
Posts: 35
Last login:April 02, 2003, 06:12:12 pm
The Prince of Darkness
Re:Only thing left on my cab is to fix the T-ball.. :(
«
Reply #2 on:
March 31, 2003, 09:56:29 pm »
well, thats what ill have to try, thanks oscar, hopefully its not a bad optipac
Logged
Send this topic
Print
Pages: [
1
]
Go Up
« previous
next »
The NEW Build Your Own Arcade Controls
|
Main
|
Main Forum
|
Only thing left on my cab is to fix the T-ball.. :(