Glass clips for cocktail cabs **Still some 1 1/4" left**

[spacies]

Hi guys,

I have just finished my latest mad creation and want to know the sizes of the USA Pacman cocktail tops.
Both the thickness of the wood and the correct glass size.

So a total size would be good.

I have gained limited access to a laser cutter today and I laser cut some glass clips and then laser etched the Space Invaders monster onto the side.
These are finished in BA grade stainless which has a mirror finish. Could probably make them from something else too. Black stainless maybe?

I have been looking at how to brand the machines I build without being to obstrusive and I finally found it! I cut myself some 80mm fan grills and included my business name and the monster in the centre.

I would like to make these clips available to you guys.
I was also thinking of etching the MAME logo as well but not sure about the usage of their logo or maybe a BYOAC logo if I can gain permission?

These look totally sick and as soon as I get my camera back from my sister I will post some pics.

Postage will have to be done via mail to keep costs down to you (7-10 days to USA). Payment will be made via Paymate because with Paypal I can only buy, not sell because as they dont accept NZ bank accounts.

If someone could give me the dimensions it would be much appreciated.
Its not going to make me rich by any means but just would like to offer something different more than anything I guess.

[subcriminal]

Cool, I may be needing some glass clips soon 

[squirrellydw]

can't wait to see pics

[rackoon]

Dude, totaly sign me up. I must have some.

[spacies]

Thanks,

Still havent got my camera back 

Can someone give me the measurements for the tops so I can make some.
I make the tops out of 18mm MDF ( 3/4" ) then a 6mm piece of glass on top.

But I think you guys have a 1" thick piece of wood? And how thick is the correct glass size?

 

[rackoon]

1" inch wood and 1/4" inch glass. =====Total of 1 1/4"

How about some pac-man ghosts or even pac-man? But I still like space invaders better though.

[spacies]

Sorry,

Almost forgot about these.

[Spartan]

oh man -- I want some!

[mvolke1]

Those are awesome. I would go for a Pac-Man set. Do you have a Web site or prices or anything?

[spacies]

Cheers fellas,

I do have a website but these aren't on there.

What would you say is a fair price per clip?

[Stingray]

I'd be interested in a set for my SI cocktail. Those are super cool!

-S

[Sizzler]

What would you say is a fair price per clip?

Your cost + 10%  or ~$20/8 clips, whichever is less.

[nostrebor]

Cheers fellas,

I do have a website but these aren't on there.

What would you say is a fair price per clip?

Onr US Dollar! Or whatever the heck you feel like charging, cause you have them and we do not. 

I have absolutely no need for these yet I an quite compelled to buy anyway. Soooooo shiney.

[rackoon]

Wow I those look great. I interested in getting some.

If you make them out of black metal will the space invader be silver?

[RayB]

It's like you took a marker and drew on them. COOL!

 

[mvolke1]

I'd say $20 to $25 plus shipping would be a fair price. I couldn't see paying more than $25.

Message me if you come up with a price and availability. I'll actually be needing new ones in a couple weeks, as I'm building a cocktail right now.

I'd go for a set of Pac-Man clips.

[danny_galaga]

they look good, and are certainly better than my own efforts. but awesome? they are just clips. someone else on this forum had some extras hed had made at a machine shop and he actually sent me a set for free! now THATS awesome 

some of your cabs on the other hand would be more deserving of the term 'awesome' 

[squirrellydw]

Those are awesome. I would go for a Pac-Man set. Do you have a Web site or prices or anything?

Yes, I would also like a pacman set.  Black clips with a silver pacman.

[Spartan]

they look good, and are certainly better than my own efforts. but awesome? they are just clips. someone else on this forum had some extras hed had made at a machine shop and he actually sent me a set for free! now THATS awesome 

some of your cabs on the other hand would be more deserving of the term 'awesome' 

C'mon, you're splitting hairs here -- they are awesome!

[mvolke1]

I'd say they're awesomely awesome! I can't wait to hand over my hard-earned cash for them, either! 

[davieboynj]

  availability?  price?

[spacies]

I think they are awesome too.

I have been building machines for quite some time now and the one thing that has let them down is the glass clips. Ok, it sounds a strange to get excited over clips but everytime I was screwing on some cut up pieces of whatever, I felt dissapointed and there was nothing available here to suit.

Now I have these!

Yesterday when I was delivering a machine I felt a lot better about it. Why? Because the clips look AWESOME!

I will work out some prices and post them up.
Also, you say you would like Pacman ones too? What should be on them?
Pacman or Ghost?

[davieboynj]

ghost!

[Stingray]

I will work out some prices and post them up.
Also, you say you would like Pacman ones too? What should be on them?
Pacman or Ghost?

As long as you're looking for input, I'd like to request the actual Space Invaders that you see onscreen rather than the monster from the artwork. I'll buy a set either way though. I look forward to seeing your pricing on these.

-S

[squirrellydw]

Pacman ghost doesn't matter.  I would like to see them in black as well

[spacies]

I will work out some prices and post them up.
Also, you say you would like Pacman ones too? What should be on them?
Pacman or Ghost?

As long as you're looking for input, I'd like to request the actual Space Invaders that you see onscreen rather than the monster from the artwork. I'll buy a set either way though. I look forward to seeing your pricing on these.

-S

I was going to do some with the Space Invaders on them, the ones from the 1st row in the game but the Monster from the artwork was a better fit. Could be easily changed though.

With the Pacman ones I could do 4 of each. 4 x Pacman and 4 x Ghosts. When you fit them to your cab you could arrange them to have 1 of each on each side of the cab. That would look like Pacman was chasing the Ghost.

I have to set the pricing at $39.95 USD a set.

I know its a little steep but it takes quite a bit to make them. Lots of tedious folding and I like to pay something to the owner of the machinery for usage to whom I am grateful for even letting me do this. Anything to do with stainless is always $$$. For those who don't know, stainless is hard on tools and specialist machinery to cut, weld and fold stainless in a commercial situation is expensive.

Considering the ones I have seen online are $35USD or even 35 pounds a set of 8 plain black ones, the price isn't that bad for these.

So if you want some, let me know sizes etc.
Because we have different measurement systems this could get tricky. You guys are in the dark ages using imperial and we use metric. I dont want to have loads of different measurements to suit indiviuals so would rather have 2 sizes per system and with 2 different styles of art for now.

So there will be a 3/4 inch top and 1/4 glass.
And 1 inch top and 1/4 glass for original machines.

I have some here now. They have an internal measurement of 24mm which is 0.9449 inch.
Because I use 18mm top and 6mm glass.
Any metric guys want some now let me know. Or imperial guys with a thinner glass top too?

I will also go to the post shop and reply with a cost for postage to USA and UK.

[crashwg]

For those who don't know, stainless is hard on tools and specialist machinery to cut, weld and fold stainless in a commercial situation is expensive.

You have a right to charge whatever you want for your product and I understand wanting to kick a little back to the owner of the machinery that you are using but...
Lasers are not affected by the material being cut and SS is no more harsh on a break than any other material.

So yea, I'm calling you out on that excuse.  A simple "$40 for a set of 8 is the price.  Take it or leave it." would do just as well.

[spacies]

For those who don't know, stainless is hard on tools and specialist machinery to cut, weld and fold stainless in a commercial situation is expensive.

You have a right to charge whatever you want for your product and I understand wanting to kick a little back to the owner of the machinery that you are using but...
Lasers are not affected by the material being cut and SS is no more harsh on a break than any other material.

So yea, I'm calling you out on that excuse.  A simple "$40 for a set of 8 is the price.  Take it or leave it." would do just as well.

Nice one mate.

I stated that this type of machinery is expensive and if you work with stainless all day you have to have good stuff.  You can't just buy a laser cutter and a press brake from your hardware store and fold some clips on a lazy sunday arvo. You have to invest mega $$$$.

You obviously know enough to say that so have another think about it. SS is harder to work with and more expensive than most other metals used in manufacturing. Thats what I was stating. I have worked with SS a lot and I can tell you that trying to cut, fold, form and weld this stuff can be a nightmare. 'nuf said.

I don't make anything on these and I only thought while I was making some for myself I would see if anyone else was interested but if you only have smart ass remarks then I won't bother. Doesn't phase me one bit.

Thanks again PAL.

/\
/\
 I
 I
 I
 I

Everyone can thank that guy.

[crashwg]

Don't get your panties in a bunch!  This is a public forum where I stated my opinion.  If that is enough for you to decide not to produce these things you should find a new forum to visit because here at BYOAC people call it as they see it.

Oh and don't try and get everyone all pissed of at me if you decide not to do this either.  If you don't make them it's because you don't want to not because I pissed in your cherios.

 

[squirrellydw]

I will take some of the Pacman ones.  I think I will want these "1 inch top and 1/4 glass for original machines"  Any chance you could take a picture of them??

[Stingray]

Don't get your panties in a bunch!  This is a public forum where I stated my opinion.  If that is enough for you to decide not to produce these things you should find a new forum to visit because here at BYOAC people call it as they see it.

Oh and don't try and get everyone all pissed of at me if you decide not to do this either.  If you don't make them it's because you don't want to not because I pissed in your cherios.

 

Will you please STFU until after I have a set of these?

Spacies, I'll measure mine and get back to you. I'm not sure what size I need, but definitely do want a set at that price.

-S

[mccoy178]

I am interested in the Pacman set at 1" total height.  You people need to stop making cool ---steaming pile of meadow muffin--- so I can leave this hobby.

[mr.Curmudgeon]

Spacey,

Those are really cool. I wish I had a cocktail so I could buy them (I think the price is fair)!   
Kudos!


mrC

[mvolke1]

I think the price is fair. They are normally $35. $39 for a set of customs is not bad. I would love the Pac-Man and Ghost set, and would pay $39 for them.

I have to get a measurement. I have an Arcade Depot cocktail kit, and I haven't gotten my glass yet.

Anyone know the measurement? 

[Grasshopper]

They look great and FWIW $40 for 8 sounds very reasonable to me. If I had a cocktail I'd definitely buy a set.

[spacies]

Don't get your panties in a bunch!  This is a public forum where I stated my opinion.  If that is enough for you to decide not to produce these things you should find a new forum to visit because here at BYOAC people call it as they see it.

Oh and don't try and get everyone all pissed of at me if you decide not to do this either.  If you don't make them it's because you don't want to not because I pissed in your cherios.

 

Was having a crap day yesterday. 


I worked in a Hot Rod shop and I have built my own drag cars, including engines, so when it comes to fabricating with metals, I know sh!t. Do you think the owner of the machinery shop I use is going to let some pimple face kid with glasses who is into video games walk in off the street and use industrial machinery? I don't think so Tim.

Nobody pisses on my cherios either. 

Anyways. 

I will make these. And I will send them anywhere in the world.
I won't get a chance to do some more until next week because its holidays here at the mo'. I made 40 for myself last time but I only have 2 sets left.

Sizes will be:

Internal measurement.
1"
1 1/4"
and 24mm

Art will be Invaders Monster ( 8 ) or Pacman and Ghost (4 of each).
Stainless  only.

Set of 8 $39.95 + P&P.

Will go to Post shop today and get some costs for post to USA. Forgot yesterday.

 

[mvolke1]

Glad to hear you came around. I'll give you measurements when I get them.

No need to let a tool get to you. 

Keep us posted, and I'll let you know when I get the measurements.

[spacies]

While I am thinking about it,

Who has some ideas about something I could make for an upright machine?
Something small like these clips?

Post your ideas.

[mvolke1]

I've been kicking around the idea of doing a bartop with an old iMac. I have one, and it's ripe for the bartop use. Monitor and computer are all right there, with a pretty darn good OS8 system, USB and all that. It's the original bullet-style body.

I don't know if you could use the clips, but it's an idea I've had rolling around my head. 

[crashwg]

FWIW I never said that the price was unfair.  If I had a cocktail and there were some sort of design you could do for a rally-x (the cocktail I'd most likely own) I'd gladly pay that...

[johnm160]

OK Spacies,

Like I did not have enough ---Cleveland steamer--- to spend my money one already......Put me down for an invaders set, I will go to my inlaws house and measure the top tomorrow but I think mine is 1"

excuse the messy pic, this was in the store room of a shop I use to work in.

http://www.arcadehobby.com/cocktail/EPSN0006.JPG

 

John

[spacies]

No worries John,

4-10 day post to USA and UK is $9USD.

Ok,

Who-ever is SERIOUS please PM me with details and a contact email.
Please state sizes and Invaders or Pacman so I can get some numbers.

 

[rackoon]

Well I guess I'm not going to sleep well at night till I get some. I am serious about getting some. To be honest I wouldn't mind having a mixed set with space invaders and pac man. I am going to have to wait a few weeks because my wife is on maternity leave and we have to live on half income for a few more weeks. But I am serious so mark me down.

Have you looked into black ones at all?

[rackoon]

I got an idea for stand ups.

How about marquee retainer clips with the byoac logo on them?

[spacies]

Thats cool.

I still need to know sizes so let me know when you can.
Not sure what you mean by retainer clips?

I was thinking of joystick dust covers. I could laser in the BYOAC logo onto those?

To all others who have expressed interest I need sizes from you guys too.

 

[spacies]

McCoy178: You still want some ?

Anyone else?

[rackoon]

I live in US so I need 1 1/4 total opening. (1' top and 1/4 glass)

[spacies]

I live in US so I need 1 1/4 total opening. (1' top and 1/4 glass)

Cool. Invaders or Pacman?

[rackoon]

I wood like them mixed. The artwork on my cab has all different old school games so I think a mixed set would be most appropriate. Thanks.

[Stingray]

I was on vacation last week and kind of forgot about this thread. I still want a set, but I don't have the measurement. I'll try to remember to do that this weekend.

-S

[spacies]

No worries Stingray.



I will put a star by it and when you have the sizes let me know.
I will probably go into the workshop next week and make the current orders if I get time.

 

[mvolke1]

I made the measurement of my tabletop, and it's one-inch. I'm assuming if I get 1/4 inch glass the clips will work?

I sent you a message requesting a set, Spacies. This is a really cool finishing detail to my cocktail. I'm going for a furniture-style cocktail, but this will finish it nicely.

Can't wait to get them.

[elvis]

Lasers are not affected by the material being cut and SS is no more harsh on a break than any other material.

This argument is already dead, but I'll chuck in some quick FACT:

Laser Cutting is expensive primarily because of the power needed to drive the high-wattage laser (and the setup labour time, but that goes away when you do it yourself or buy bulk).   The wattage of the laser required depends entirely on the material you are cutting.  The statement you make above is incorrect.  Stainless Steel is extremely reflective, and when hit with a standard cutting laser, roughly 20% of the cutting heat is lost in reflection.

Compared to mild steel, stainless requires around 20% EXTRA power from the laser.  Where I live here in Brisbane Australia, there are probably 100 laser cutters in the phone book.  Of those, only 5 will cut stainless, because the rest don't have machinery powerful enough.  I know, because I rang nearly all of them for a job I needed done.

This isn't internet conjecture.  Ring up a laser cutter and ASK THEM on the phone what the go is, and they'll say the same. 

Nobody *likes* working with stainless.  The material itself is dead sexy, and the end results are stunning (I have all-stainless control panels on my cocktail cab and they are STUNNING).  At first I was stupid enough to try and cut the stuff myself.  $100 in broken tools later, I bit the bullet and paid another $200 to get the suckers laser cut.   Total ---smurfette--- of a job that ended up costing me more for the CPs than the rest of the cabinet, but it looks amazing.

Anyways... back on topic: Spacies, do you have any of these clips left?  I might be interested in a set of 8 for said cocktail.  And yes, I use the sensible metric system, and need 24mm gap (18mm MDF and 6mm glass).  Do you have a few lying around, or make on demand?

[spacies]

Nice one Elvis.

This arguement is already dead and sometimes its easier to give up rather than argue.

I have been working with metals since I was 16. Thats nearly 20years so I know a thing or 2.

Stainless is an awesome material and if someone tells you it is no harder on tools than other metals then they are wrong. Like you found out trying to cut a peice of stainless sheet. Sure, you can do it with an angle grinder and cut off wheels, but it will chew those discs to bits and also leave the burn marks from getting too hot if you are not careful.

As for the laser thing. Again, correct. It is THE best and easiest way to cut stainless.

I do have some 24mm clips here, already to go. I am going into the workshop this coming week to fab some more for the orders I have 'cos the USA guys are in the dark ages and use imperial measurements.   

PM me if you want some.

[mvolke1]

Spacies,

Let me know when my 1 1/4 inch clips are done so I can pay you right away. My cocktail is on the verge of completion, and I'd like to get those clips! Can't wait! 

They will be the last piece I need to get. I should be done with the whole cab by Friday, and I have everything but the clips. I've been holding back a bit on completion so the glass isn't just sitting there without anything to hold it in place.

[squirrellydw]

So did you get a chance to make some??

[mvolke1]

I was wondering, myself. My cocktail will be done this weekend, and I'd like to get a set. I don't have a backup yet.

[mvolke1]

I think I'm officially giving up. The post started Oct. 20, about a month now. I think I'm going to go with Arcade Shop, they are like $3 each there.

Does any know where they're cheaper?

[spacies]

Hey,

Sorry but I have been away. A friend purchased an upmarket apartment and the developer went belly up. So a group of us friends came together and finished the apartment so he somewhere to live and at least have something to show for his mega $$$$.

Such an awesome place now.

Anyway, the clips.

The Space Invaders ones are done.

But I need some input on the Pacman clips. Do I just use the art like Pacman is in the game, a circle with a piece missing, or do I use art like in Pacland?

And the Ghosts. Normal or after you eat a power pill?

Make your descions and give me some artowrk if you have any.

I could have these ready by the end of the week.


mvolke1 : Real world things are more important than your clips. The guy had almost a million dollars tied up in that apartment so chill out. Buy your clips from somewhere else if you want.

Anyone got some art or input?

[mvolke1]

It's been a month. Figured you got busy, that's why I'm looking elsewhere. I was holding out for you.

That said, I'd still like some. I would like the traditional pac-man and traditional ghost.

[squirrellydw]

  Anyone else??

[FunWithFire]

What about the Pacman and ghost from the original marquee?

[squirrellydw]

yeah, yeah......I like that a lot, that has my vote

[spacies]

Cool,

I prefer the marquee to.

[mvolke1]

I'm down with the marquee, as well. If everyone wants that, I'm sure it's easier for you, Spacies, to do all of one kind.

So it would be the marquee pac-man on the clip alone, and the ghost alone on the other clip, right?

[spacies]

So it would be the marquee pac-man on the clip alone, and the ghost alone on the other clip, right?

Correct.

I will get on to these ASAP.

[mvolke1]

Maybe these will help....

[squirrellydw]

Let me know when you have them ready so I can pay for them

Thanks

[spacies]

Clips are all done!

I have the following:

 
1 and 1/4" internal height measurement. Space Invaders ecthed x 16 clips.

1" internal height measurement. Space Invaders etched x 16 clips.
 
1 and 1/4" internal height measurement. Pacman etched x 16 clips.
1 and 1/4" internal height measurement. Ghost etched x 16 clips.

1" internal height measurement. Pacman etched x 8 clips.
1" internal height measurement. Ghost etched x 8 clips.

Ok,

John160, squrellydw, mvolke1 and Rackoon. You guys still want them?

[squirrellydw]

Yes, I would like the 1 and 1/4"
4 pacman and 4 ghost clips. 

[squirrellydw]

Do you have any pics of the pacman and ghost??

[spacies]

My partner is away with our camera at the mo'

Will try get a camera to take some pics before she comes back on Monday.

I will post up some pics and if you like them I will forward payment instructions.

Thanks.

[squirrellydw]

Do they look like the original marquee?  If so send me a PayPal invoice and I will pay for them or tell me how you would like me to pay for them.

[spacies]

They look like the marquee.

They are pretty cool.

My website host is doing some upgrading this week so I am not receiving emails from web address and thats the address I have the Paymate account with. Should be back up and running on Friday.

Have a look here www.paymate.co.nz anyway because this is the only way I can accept payments from overseas. Paypal currently don't pay into NZ bank accounts. This is an NZ copy of Paypal. I will inform you of my email to use soon.

 

[squirrellydw]

sounds good, thanks

[mvolke1]

I, too, would like a 1 1/4 set of Pac-Man and Ghost. So that would be four ghost and four pac-man clips.

My e-mail is mvolke1@hotmail.com. Please let me know when I can make a payment. Can't wait to see them!

[squirrellydw]

Hey Spacies, any news yet?

[MAME TIME]

ahhh i want some too but i dont have the glass for my cocktail yet, i would also like the pacman with the ghost, any news on the final price??

[melidian]

i'm very interested in this and pics...would like to buy in bulk 1 and 1/4" probably pac and ghost mix

[squirrellydw]

Whats up Spacies, you still here??

[spacies]

Im still here.

Sorry for the delay.

Here are the new clips:






Had to drop the Pacman down a bit otherwise he would have been too small.

Now I have to wait for my new Credit Card because the one I have set up for the payments expired yesterday....

Hope that won't take too long though.

What do you think?

Off to the Bank......

[Donkey_Kong]

Holy friggin sweet mother of jesus those are SWEET!! I don't have glass yet but I might have clips 1st!!

How much?!?!?

[quarterback]

How much?!?!?

If spacies' previous numbers are still accurate, it's $48.95 shipped to the US

Set of 8 $39.95 + P&P.

4-10 day post to USA and UK is $9USD.

[squirrellydw]

Woohoo, can't wait to get these.   SWEEEET

[spacies]

New Visa is on its way.

Will post when its here.

 

[squirrellydw]

yay

[squirrellydw]

update??

[mvolke1]

This stream started September 28. I gave up a while ago and bought some clips from Arcade Shop.

Too bad because these were really nice ones. Anyone else out there make custom clips?

[mmmPeanutButter]

 

[spacies]

Sorry guys,

I am currently on the road being an 'Arcade Santa' doing deliveries before Xmas.

I will be back home in 2 days.

Will post later on today to make sure my card has arrived.

[mvolke1]

That's pretty funny right there. 

[spacies]

Card is here.

New thread in B/S/T.

http://forum.arcadecontrols.com/index.php?topic=61353.0

[spacies]

I know it took a while for things to get sorted out, but I have 80 clips here now and nobody wants them?

I am not too fussed about selling the 1 inch ones 'cos I can use them myself but the bigger ones you guys asked me to make are no use to me because all my cabs are made from 3/4" MDF.

Who wants them???

[shock_]

Who wants them???

Me, dag nabbit!!

Have just ordered some of the proper-sized ones (24mm).  Now all I need is my sheet of glass to finish being toughened so I can whack it all together! 

[fjl]

Wait, I'm still relatively new to all this. How about a pic of where these go? One or a few being used.

[shock_]

Wait, I'm still relatively new to all this. How about a pic of where these go? One or a few being used.

In Spacies' own photos: holding the glass to the tabletop.

[mvolke1]

I ordered a set. We'll see how it goes.

[spacies]

Thanks fellas.

I was wondering what I was going to do with 70 spare clips 

I have received your emails and clips will be dispatched when the funds clear in my account.

mvolke1: I forgot to mention that the ghost on the clip is slightly darker than the Pacman. I only just realized this after removing the protective coating from the clip. Apologies for not looking earlier. I am sure you will be in touch once you receive them.

I will email when they have been sent.

Thanks again. 

[OzHomer]

Spacies,

Have you tried making the original plain black version?

I am building a Midway cocktail table here in Australia and will shortly need these clips.

I got a quote for postage from Arcadeshop Amusements ( http://www.arcadeshop.com/) for 8 clips ( 8 X $3.00USD = $24.00USD) and the postage came to $23.00USD. 

Being around the corner in NZ I'd rather throw the business your way.

Cheers.

[spacies]

Hey Homer,

After these have gone I won't be making anymore for sale in the near future.

I have though of making some black ones from steel but don't have a use for them.

Maybe down the track a bit.

Sorry I can't help.

[mvolke1]

Thanks fellas.

I was wondering what I was going to do with 70 spare clips 

I have received your emails and clips will be dispatched when the funds clear in my account.

mvolke1: I forgot to mention that the ghost on the clip is slightly darker than the Pacman. I only just realized this after removing the protective coating from the clip. Apologies for not looking earlier. I am sure you will be in touch once you receive them.

I will email when they have been sent.

Thanks again. 

I'm sure they'll be fine. Looking forward to getting them. If they are really whacky, I'll let you know, but thanks for the heads up.

[spacies]

Both sets dispatched today.


Thanks again.

[FrizzleFried]

Can you/will you do Atari Cocktail style "corner" clips?

[spacies]

Can you/will you do Atari Cocktail style "corner" clips?

Show me a pic of some.

[mvolke1]

Both sets dispatched today.


Thanks again.

Awesome! Thanks, Spacies. Looking forward to getting a package of arcade parts from the other side of the planet. 

[squirrellydw]

Spacies, I still plan on getting the 1 1/4 pacman clips but I will have to wait 2 more weeks till I get paid again.  I had some other things come up that had to be taken care of first.  Sorry for the delay but I still want them.

[OzHomer]

Hey Homer,

After these have gone I won't be making anymore for sale in the near future.

I have though of making some black ones from steel but don't have a use for them.

Maybe down the track a bit.

Sorry I can't help.

No problems.

Shame I couldn't use your silver ones. They look sweet.

Cheers.

[spacies]

I still have loads of silver ones left.

I also have some silver ones were the etching isn't very good that you could paint black.

If you want some, let me know.

 

[spacies]

Any arrivals yet?

[shock_]

Still waiting... today is my birthday so I'm kinda hoping it shows up soon   Has only been a few working days, and that Tasman Sea is bigger than it looks! 

[spacies]

Happy Birthday shock.
Well, I hope they arrive for you today.

Wouldn't it be funny if the USA ones arrived before yours?

Blardy OZ customs probably got them.

Oh yeah, I forgot to mention, I wrapped them in a Boogie Board case. 

[shock_]

  rofl... it's probably been re-routed to Indo', I hear they're one short up there!

I realised today also that I'm now, in binary, 100000 years old - that's gotta count for something.

[shock_]

Clips have made it past the sniffer dogs and arrived this morning.  They are indeed spectacular!

They arrived at the same time, by the same courier no less, as a package containing a coin mech and a few other parts from some other place too.   I have a busy weekend ahead

[spacies]

Thats good news!

Glad you like them also.

They are my favourite part of my machine next to my custom fan grills.

Thanks once again.

[mvolke1]

I'm still waiting, but I'm in the states. I'll let you know what I think as soon as I get them. Looking forward to it.

[shock_]

I brought one in to work and showed a few people... those who "get it" had big smiles and now they all want an invite over to my place when the cabinet is finished.  As such, I think I'll get that coin mech working after all 

[spacies]

I brought one in to work and showed a few people... those who "get it" had big smiles and now they all want an invite over to my place when the cabinet is finished.  As such, I think I'll get that coin mech working after all 

Ha ha ha,

Thats funny.

Good to see you are a proud man shock!

[spacies]

Yep,

As the title says, if you have any classic PCBs, I could be interested in a trade.


PM me.

[mvolke1]

Got my clips on Friday. They look good, and really good on my cocktail. Glad I went with them. They give my cab something unique.

Good work, mate.

[spacies]

Thats good to hear Matt.

Thanks again.

 

[squirrellydw]

Sorry it took so long.  I just ordered mine.  Hope to see them in about 3 weeks.

Oh, I forgot to say that I need the 1 1/4, 4 pacman and 4 ghosts
Thanks

[squirrellydw]

Payment should be deposited by tomorrow

[squirrellydw]

Payment cleared my account, any idea when yo might ship them?

[spacies]

Hey,

Payment cleared.

Clips will be sent --tomorrow is too many letters to type so instead I'll just say the day after today-- as its a public holiday day here today.

Should take about 10 days to U, S and A  and 5 days to Oztraya 

Thanks again to squirell and Chris.

[squirrellydw]

thanks, 4 pacman and 4 ghosts right

[spacies]

thanks, 4 pacman and 4 ghosts right

Yup. 

[squirrellydw]

still haven't received them yet    I am thinking they will get here this week

[squirrellydw]

I lied, I just checked the mail from yesterday and they are here      I didn't unwrap them yet but they look very nice.  Thanks

[spacies]

Thats good news,

Thanks again!

[spacies]

Ok,

I want to update my website but I know naff al about that stuff.

Who's the guru around here?
I can offer you a nice set of Invaders Glass clips for your help.

I just need some thumbnail pictures added to my website.

PM me.

Spacies.

[spacies]

Hey fellas.

I still have some 1 1/4" clips. ( 1" wood, 1/4" glass)
Anyone interested?

I haven't had time to do any more small ones for resale, only my own.
I will try and do some soon but no promises.

 

[spacies]

Bumpity Bump.

Just having a tidy up and found these 1 1/4" clips.



Still got heaps of them if anyone is interested

[Franco B]

I still need to grab a set of the SI ones off you, Ill shoot you a PM 

[spacies]

Old thread bumped up because I just found these clips.

I still have a heap of the 1 1/4" ones.
LMK if you want any.

Cheers.

[wivelden]

Sorry to bump an old thread but are these still available? Im looking for some black cocktail glass clips. Thanks

[dextercf]

Getting these in black, but with the laser etching in metallic.. THAT would blow my wistle clear off!