Author Topic: Glass clips for cocktail cabs Still some 1 1/4" left (Read 25240 times)

spacies · « **Reply #80 on:** November 30, 2006, 09:36:00 pm »

Im still here.

Sorry for the delay.

Here are the new clips:

Had to drop the Pacman down a bit otherwise he would have been too small.

Now I have to wait for my new Credit Card because the one I have set up for the payments expired yesterday....

Hope that won't take too long though.

What do you think?

Off to the Bank......

Donkey_Kong · « **Reply #81 on:** November 30, 2006, 09:48:10 pm »

Holy friggin sweet mother of jesus those are SWEET!! I don't have glass yet but I might have clips 1st!!

How much?!?!?

quarterback · « **Reply #82 on:** November 30, 2006, 09:55:45 pm »

Quote from: Donkey_Kong on November 30, 2006, 09:48:10 pm

How much?!?!?

If spacies' previous numbers are still accurate, it's $48.95 shipped to the US

Quote from: spacies on October 18, 2006, 04:41:56 pm

Set of 8 $39.95 + P&P.

Quote from: spacies on October 19, 2006, 03:16:28 am

4-10 day post to USA and UK is $9USD.

squirrellydw · « **Reply #83 on:** December 01, 2006, 10:41:50 am »

Woohoo, can't wait to get these. SWEEEET

spacies · « **Reply #84 on:** December 05, 2006, 02:12:25 am »

New Visa is on its way.

Will post when its here.

squirrellydw · « **Reply #85 on:** December 05, 2006, 08:21:12 am »

squirrellydw · « **Reply #86 on:** December 19, 2006, 11:53:14 pm »

update??

mvolke1 · « **Reply #87 on:** December 20, 2006, 02:19:36 pm »

This stream started September 28. I gave up a while ago and bought some clips from Arcade Shop.

Too bad because these were really nice ones. Anyone else out there make custom clips?

mmmPeanutButter · « **Reply #88 on:** December 20, 2006, 02:30:45 pm »

spacies · « **Reply #89 on:** December 20, 2006, 03:05:45 pm »

Sorry guys,

I am currently on the road being an 'Arcade Santa' doing deliveries before Xmas.

I will be back home in 2 days.

Will post later on today to make sure my card has arrived.

mvolke1 · « **Reply #90 on:** December 20, 2006, 04:49:45 pm »

Quote from: mmmPeanutButter on December 20, 2006, 02:30:45 pm

That's pretty funny right there.

spacies · « **Reply #91 on:** December 21, 2006, 04:53:20 pm »

Card is here.

New thread in B/S/T.

http://forum.arcadecontrols.com/index.php?topic=61353.0

spacies · « **Reply #92 on:** December 28, 2006, 10:17:43 pm »

I know it took a while for things to get sorted out, but I have 80 clips here now and nobody wants them?

I am not too fussed about selling the 1 inch ones 'cos I can use them myself but the bigger ones you guys asked me to make are no use to me because all my cabs are made from 3/4" MDF.

Who wants them???

shock_ · « **Reply #93 on:** January 12, 2007, 11:32:48 pm »

Quote from: spacies on December 28, 2006, 10:17:43 pm

Who wants them???

Me, dag nabbit!!

Have just ordered some of the proper-sized ones (24mm). Now all I need is my sheet of glass to finish being toughened so I can whack it all together!

fjl · « **Reply #94 on:** January 13, 2007, 01:00:28 am »

Wait, I'm still relatively new to all this. How about a pic of where these go? One or a few being used.

shock_ · « **Reply #95 on:** January 13, 2007, 04:56:00 am »

Quote from: fjl on January 13, 2007, 01:00:28 am

Wait, I'm still relatively new to all this. How about a pic of where these go? One or a few being used.

In Spacies' own photos: holding the glass to the tabletop.

mvolke1 · « **Reply #96 on:** January 13, 2007, 11:15:10 am »

I ordered a set. We'll see how it goes.

spacies · « **Reply #97 on:** January 15, 2007, 02:41:59 pm »

Thanks fellas.

I was wondering what I was going to do with 70 spare clips

I have received your emails and clips will be dispatched when the funds clear in my account.

mvolke1: I forgot to mention that the ghost on the clip is slightly darker than the Pacman. I only just realized this after removing the protective coating from the clip. Apologies for not looking earlier. I am sure you will be in touch once you receive them.

I will email when they have been sent.

Thanks again.

OzHomer · « **Reply #98 on:** January 16, 2007, 02:37:48 am »

Spacies,

Have you tried making the original plain black version?

I am building a Midway cocktail table here in Australia and will shortly need these clips.

I got a quote for postage from Arcadeshop Amusements ( http://www.arcadeshop.com/) for 8 clips ( 8 X $3.00USD = $24.00USD) and the postage came to $23.00USD.

Being around the corner in NZ I'd rather throw the business your way.

Cheers.

spacies · « **Reply #99 on:** January 16, 2007, 02:45:03 pm »

Hey Homer,

After these have gone I won't be making anymore for sale in the near future.

I have though of making some black ones from steel but don't have a use for them.

Maybe down the track a bit.

Sorry I can't help.

mvolke1 · « **Reply #100 on:** January 16, 2007, 03:29:36 pm »

Quote from: spacies on January 15, 2007, 02:41:59 pm

Thanks fellas.

I was wondering what I was going to do with 70 spare clips

I have received your emails and clips will be dispatched when the funds clear in my account.

mvolke1: I forgot to mention that the ghost on the clip is slightly darker than the Pacman. I only just realized this after removing the protective coating from the clip. Apologies for not looking earlier. I am sure you will be in touch once you receive them.

I will email when they have been sent.

Thanks again.

I'm sure they'll be fine. Looking forward to getting them. If they are really whacky, I'll let you know, but thanks for the heads up.

spacies · « **Reply #101 on:** January 16, 2007, 03:53:03 pm »

Both sets dispatched today.

Thanks again.

FrizzleFried · « **Reply #102 on:** January 16, 2007, 04:18:08 pm »

Can you/will you do Atari Cocktail style "corner" clips?

spacies · « **Reply #103 on:** January 16, 2007, 04:48:46 pm »

Quote from: FrizzleFried on January 16, 2007, 04:18:08 pm

Can you/will you do Atari Cocktail style "corner" clips?

Show me a pic of some.

mvolke1 · « **Reply #104 on:** January 16, 2007, 05:03:19 pm »

Quote from: spacies on January 16, 2007, 03:53:03 pm

Both sets dispatched today.

Thanks again.

Awesome! Thanks, Spacies. Looking forward to getting a package of arcade parts from the other side of the planet.

squirrellydw · « **Reply #105 on:** January 16, 2007, 09:16:24 pm »

Spacies, I still plan on getting the 1 1/4 pacman clips but I will have to wait 2 more weeks till I get paid again. I had some other things come up that had to be taken care of first. Sorry for the delay but I still want them.

OzHomer · « **Reply #106 on:** January 17, 2007, 02:22:14 am »

Quote from: spacies on January 16, 2007, 02:45:03 pm

Hey Homer,

After these have gone I won't be making anymore for sale in the near future.

I have though of making some black ones from steel but don't have a use for them.

Maybe down the track a bit.

Sorry I can't help.

No problems.

Shame I couldn't use your silver ones. They look sweet.

Cheers.

spacies · « **Reply #107 on:** January 17, 2007, 02:35:46 am »

I still have loads of silver ones left.

I also have some silver ones were the etching isn't very good that you could paint black.

If you want some, let me know.

spacies · « **Reply #108 on:** January 22, 2007, 03:43:33 pm »

Any arrivals yet?

shock_ · « **Reply #109 on:** January 22, 2007, 11:04:04 pm »

Still waiting... today is my birthday so I'm kinda hoping it shows up soon

Has only been a few working days, and that Tasman Sea is bigger than it looks!

spacies · « **Reply #110 on:** January 23, 2007, 01:28:09 am »

Happy Birthday shock.
Well, I hope they arrive for you today.

Wouldn't it be funny if the USA ones arrived before yours?

Blardy OZ customs probably got them.

Oh yeah, I forgot to mention, I wrapped them in a Boogie Board case.

shock_ · « **Reply #111 on:** January 23, 2007, 06:51:46 am »

rofl... it's probably been re-routed to Indo', I hear they're one short up there!

I realised today also that I'm now, in binary, 100000 years old - that's gotta count for something.

shock_ · « **Reply #112 on:** January 24, 2007, 07:39:37 am »

Clips have made it past the sniffer dogs and arrived this morning. They are indeed spectacular!

They arrived at the same time, by the same courier no less, as a package containing a coin mech and a few other parts from some other place too. I have a busy weekend ahead

spacies · « **Reply #113 on:** January 24, 2007, 02:36:49 pm »

Thats good news!

Glad you like them also.

They are my favourite part of my machine next to my custom fan grills.

Thanks once again.

mvolke1 · « **Reply #114 on:** January 24, 2007, 05:34:33 pm »

I'm still waiting, but I'm in the states. I'll let you know what I think as soon as I get them. Looking forward to it.

shock_ · « **Reply #115 on:** January 24, 2007, 06:52:20 pm »

I brought one in to work and showed a few people... those who "get it" had big smiles and now they all want an invite over to my place when the cabinet is finished. As such, I think I'll get that coin mech working after all

spacies · « **Reply #116 on:** January 25, 2007, 07:07:54 pm »

Quote from: shock_ on January 24, 2007, 06:52:20 pm

I brought one in to work and showed a few people... those who "get it" had big smiles and now they all want an invite over to my place when the cabinet is finished. As such, I think I'll get that coin mech working after all

Ha ha ha,

Thats funny.

Good to see you are a proud man shock!

spacies · « **Reply #117 on:** January 25, 2007, 07:11:02 pm »

Yep,

As the title says, if you have any classic PCBs, I could be interested in a trade.

PM me.

mvolke1 · « **Reply #118 on:** January 27, 2007, 12:24:00 pm »

Got my clips on Friday. They look good, and really good on my cocktail. Glad I went with them. They give my cab something unique.

Good work, mate.

spacies · « **Reply #119 on:** January 28, 2007, 12:48:22 am »

Thats good to hear Matt.

Thanks again.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Glass clips for cocktail cabs **Still some 1 1/4" left** (Read 25240 times)

Author Topic: Glass clips for cocktail cabs Still some 1 1/4" left (Read 25240 times)