Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Kudos for Ultimarc and Andy  (Read 1885 times)

0 Members and 1 Guest are viewing this topic.

namedos

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 263
  • Last login:July 16, 2025, 07:15:23 pm
Kudos for Ultimarc and Andy
« on: September 22, 2005, 03:47:59 pm »
I have been continually impressed with Andy's products and his service. 

I had ordered a Optipac and it was missing a serial cable (probably my own fault as it sat for a couple of months before considering installing it), sent Andy an email and within a few days I had a replacement.

Sold the Optipac to a fellow board member who had some problems with it and Andy sent him a replacement board.

Ordered an ArcadeVGA video card.  Apparently it was one of a batch that were bad.  Andy sent a new one prior to receiving my old one.

Just ordered a console convertor from him on Monday and I just received it.  Wow!!! :o

I really appreciate the service and standing behind his product.

Thanks Andy!!!  :D :D :D
Logged

Thenasty

  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4420
  • Last login:Yesterday at 05:00:13 pm
    • Thenasty's Arcademania Horizontal/Vertical monitor setup.
Re: Kudos for Ultimarc and Andy
« Reply #1 on: September 22, 2005, 08:53:13 pm »
Andy got a lot of KUDOS from every single one of us here, I'm sure he's not sick of it
Logged
Thenasty's Arcademania Horizontal/Vertical setup.
http://forum.arcadecontrols.com/index.php?topic=26696.0

Free VGA Breakout Cable
http://forum.arcadecontrols.com/index.php?topic=38228.0

Ultimate All in One Coin Mech write up (Make your own)
http://forum.arcadecontrols.com/index.php?topic=19200.0

lcddream

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 498
  • Last login:December 04, 2024, 03:59:31 pm
  • Say goodbye to gravity...
Re: Kudos for Ultimarc and Andy
« Reply #2 on: September 22, 2005, 09:51:08 pm »
Quote from: namedos on September 22, 2005, 03:47:59 pm
I have been continually impressed with Andy's products and his service. 

I had ordered a Optipac and it was missing a serial cable (probably my own fault as it sat for a couple of months before considering installing it), sent Andy an email and within a few days I had a replacement.

Sold the Optipac to a fellow board member who had some problems with it and Andy sent him a replacement board.

Ordered an ArcadeVGA video card.  Apparently it was one of a batch that were bad.  Andy sent a new one prior to receiving my old one.

Just ordered a console convertor from him on Monday and I just received it.  Wow!!! :o

I really appreciate the service and standing behind his product.

Thanks Andy!!!  :D :D :D

yep...i'm the one that got the bum opti...andy is indeed the best in the biz...did i mention i got the replacement in ny from the uk in like 4 days? wow!
Logged

albert_c

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 230
  • Last login:April 06, 2010, 03:57:07 pm
Re: Kudos for Ultimarc and Andy
« Reply #3 on: September 23, 2005, 12:31:09 am »
I guess I'm on the other end of the stick.  I've been waiting for 12 days for a replacement for a bad xbox monitor adapter... ??? 

Hopefully he didn't forget about me...
Logged

brophog

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 486
  • Last login:January 20, 2019, 03:49:41 am
  • I want to build my own arcade controls!
Re: Kudos for Ultimarc and Andy
« Reply #4 on: September 23, 2005, 01:07:10 am »
Drop him an email. There's likely a reason for the delay.
Logged

namedos

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 263
  • Last login:July 16, 2025, 07:15:23 pm
Re: Kudos for Ultimarc and Andy
« Reply #5 on: September 23, 2005, 12:02:12 pm »
London is eight hours ahead of us on the West Coast but he has responded within 24 hours of each of my messages.
Logged

MameJunkie

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 427
  • Last login:March 19, 2009, 08:23:45 pm
  • Eeeeeeeevil
Re: Kudos for Ultimarc and Andy
« Reply #6 on: September 23, 2005, 02:27:02 pm »
Also thumbs up on Andy & Ultimarc.

I got a Mini-PAC awhile ago and it had missing/broken pins.
Andy sent a replacement one and I received it within a week.  :laugh:

Logged
Teamwork - A group of people running around doing what I say.

lcddream

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 498
  • Last login:December 04, 2024, 03:59:31 pm
  • Say goodbye to gravity...
Re: Kudos for Ultimarc and Andy
« Reply #7 on: September 28, 2005, 11:32:25 pm »
Quote from: kage 8 on September 23, 2005, 12:31:09 am
I guess I'm on the other end of the stick.  I've been waiting for 12 days for a replacement for a bad xbox monitor adapter... ??? 

Hopefully he didn't forget about me...

just email him and give a little push..he'll get you your part.
Logged

albert_c

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 230
  • Last login:April 06, 2010, 03:57:07 pm
Re: Kudos for Ultimarc and Andy
« Reply #8 on: September 29, 2005, 03:16:38 am »
Part came in!  Kudos! :police:
Logged
Pages: [1]
  
Go Up
« previous next »