Author Topic: Coin Mech Connection (Read 923 times)

Franco · « **on:** March 19, 2005, 06:48:02 am »

Currently I have the setup below to connect/disconnect the wires from my coin mechs to my Ipac when I want to remove my CP from my cab:-

As you can see it is not really ideal and I was wondering if anyone knows of some kind of plug in connector which would be more suitable. There are five wires, one from each mech and a common ground. The connector will also need to fit though a 1 1/8

Thenasty · « **Reply #1 on:** March 19, 2005, 09:31:28 am »

rj45 or molex


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Coin Mech Connection (Read 923 times)

Franco

Coin Mech Connection

Thenasty

Re: Coin Mech Connection