Author Topic: SPRING SPECIAL (Read 2598 times)

Peter Baluk · « **on:** March 28, 2004, 09:52:13 am »

Flat Pack (new in box) with a new Jamma Harness.
$350.00 plus shipping or can pick up.Complete with marquee glass and supports.Screen plexi ,front panel pre punched.All hardware supplied

Goz · « **Reply #1 on:** March 28, 2004, 03:39:08 pm »

Got pics?

-Goz

Peter Baluk · « **Reply #2 on:** March 28, 2004, 04:19:39 pm »

Quote from: Gozur on March 28, 2004, 03:39:08 pm

Got pics?

-Goz
[/just as soon as possiblequote]

Thenasty · « **Reply #3 on:** March 28, 2004, 10:53:08 pm »

Quote from: Gozur on March 28, 2004, 03:39:08 pm

Got pics?

-Goz

more importantly, what are you selling ? You did not mentioned it unless I have been blind

Snarbald · « **Reply #4 on:** March 29, 2004, 03:44:13 am »

Also, where are you located?

SirPeale · « **Reply #5 on:** March 29, 2004, 07:58:31 am »

Quote from: Thenasty on March 28, 2004, 10:53:08 pm

more importantly, what are you selling ? You did not mentioned it unless I have been blind

He sure did. JAMMA flatpacks. Cabinets that have not been assembled with hardware.

Thenasty · « **Reply #6 on:** March 29, 2004, 08:22:49 am »

Quote from: Peale on March 29, 2004, 07:58:31 am

Quote from: Thenasty on March 28, 2004, 10:53:08 pm
more importantly, what are you selling ? You did not mentioned it unless I have been blind

He sure did. JAMMA flatpacks. Cabinets that have not been assembled with hardware.

gotta admit, I never heard of "flatpacks" before. Got any pics so I know what it looks like ?

civic83 · « **Reply #7 on:** March 29, 2004, 08:47:40 am »

I have seen these cabinets before at his warehouse, they are quite nice and look very useable for mame. The only thing pictured that I beleive you have to buy seperately is the coin door.

civic83 · « **Reply #8 on:** March 29, 2004, 08:48:22 am »

here is a picture of one of them

civic83 · « **Reply #9 on:** March 29, 2004, 08:48:53 am »

and another

Edgedamage · « **Reply #10 on:** March 29, 2004, 09:57:56 am »

Great that's all we need is operators with warehouses full of stuff finding about ebay and byoac.

Empty cab before ebay/byoac= $25

After= $100

Sephroth57 · « **Reply #11 on:** March 29, 2004, 01:25:22 pm »

that is the most horrible button layout ive ever seen... i played a soul caliber 2 at a movie theater with a layout like that using the side holes, and its impossible to press block comfortably.

flampoo · « **Reply #12 on:** March 30, 2004, 03:56:56 pm »

With all those holes you'd think an acceptable configuration would be possible, but no matter how I look at it I don't see anything good. No good layout for NG. No good layout for SFII.
Went a little crazy with the Greenlee.

SirPeale · « **Reply #13 on:** March 30, 2004, 05:07:37 pm »

I'm not sure how you would block the unnecessary holes, but a good configureation is very possible, IF you go with the JAMMA standard of three buttons per player. I think you could even do four.

Peter Baluk · « **Reply #14 on:** March 30, 2004, 05:37:25 pm »

Quote from: Snarbald on March 29, 2004, 03:44:13 am

Also, where are you located?

located in Brantford Ontario

Edit: fixed quotation.

Peter Baluk · « **Reply #15 on:** March 30, 2004, 05:40:24 pm »

Quote from: Edgedamage on March 29, 2004, 09:57:56 am

Great that's all we need is operators with warehouses full of stuff finding about ebay and byoac.

Empty cab before ebay/byoac= $25

After= $100

the news is out Ebay exists have known about it for years,but I wont tell any other operators.

Edit: fixed quotation.

JoeB · « **Reply #16 on:** March 31, 2004, 08:06:40 am »

What I'm interested in finding out is if you're the guy we've been talking about here:

http://www.arcadecontrols.org/yabbse/index.php?board=2;action=display;threadid=16198

Or if you just happen to live in the same city as him and reselling for him (or without him knowing).

My financee is from Brantford, and I doubt there are that many operators there (considering how tiny the city is)

menace · « **Reply #17 on:** March 31, 2004, 08:20:59 am »

yep same guy

Edgedamage · « **Reply #18 on:** March 31, 2004, 09:17:59 am »

why do some of these posts have:
"Edit: fixed quotation"

SirPeale · « **Reply #19 on:** March 31, 2004, 10:02:09 am »

Quote from: Edgedamage on March 31, 2004, 09:17:59 am

why do some of these posts have:
"Edit: fixed quotation"

When he replied he cut the code for the quotations and the whole post was mangled. I fixed it.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news