Author Topic: WTB : Nintendo Cab Monitor Mounts (Read 1602 times)

General Zod · « **on:** March 14, 2004, 08:58:03 pm »

I'm looking for a set of monitor mounts for an upright DK cab. Also, if you happen to have the bar , I'd like that as well.

I tried using a Midway monitor bar, but it wasn't the right size.

Please PM me with pricing should you have these.

Thanking you in advance.

Mike

CitznFish · « **Reply #1 on:** March 14, 2004, 11:22:53 pm »

sorry, don't have it, but I just wanted to comment on how CLEAN everything looks in there.

how come there is no cage around the PCB?

General Zod · « **Reply #2 on:** March 15, 2004, 08:23:47 pm »

Quote from: CitznFish on March 14, 2004, 11:22:53 pm

sorry, don't have it, but I just wanted to comment on how CLEAN everything looks in there.

how come there is no cage around the PCB?

Thank you for the compliment on the cleanliness of the cab. I did a quite a job on making her "look pretty"

I do wish it were mine though. She is simply just one of the cabs I shopped at work. Everything was original though, and it did look very nice.

As for the cage .... you got me on that one. This is how it looked when I popped off the back door. Still complete, and working 100%. Unfortunately at work Nintendo parts run pretty scarce, I can't strip a perfectly good cab for my own wants and needs.

Same goes for the Midway pieces I'm looking for. I can't take any from an unused cab, and we don't usually junk those.

General Zod · « **Reply #3 on:** March 20, 2004, 08:39:05 pm »

Just a lil' bump ... still hoping someone might have these parts

Thenasty · « **Reply #4 on:** March 20, 2004, 08:41:14 pm »

you rlooking for that "L" shape bracket ?

General Zod · « **Reply #5 on:** March 20, 2004, 08:50:34 pm »

Yes, and the mounting bar for the monitor. I have a few midway bars, but those are to large, and id rather not cut them as i'll probably need them in the future.

but yes, the 2 brackets, the bar ... and the top marquee retainer are the parts im seeking at the moment.

with what ive done so far ... its probably easier finding that needle in a haystack that everyone seems to lose.

Thenasty · « **Reply #6 on:** March 21, 2004, 05:15:07 pm »

This is the "L" bracket...

Thenasty · « **Reply #7 on:** March 21, 2004, 05:15:30 pm »

This is the BAR

General Zod · « **Reply #8 on:** March 21, 2004, 07:58:42 pm »

Thenasty ... Check your PM !

Thenasty · « **Reply #9 on:** March 21, 2004, 09:15:52 pm »

glad to make your Weekend a Weekend

Thenasty · « **Reply #10 on:** March 22, 2004, 01:20:07 pm »

are this the ones? Looks normal to me. But it did come off a DK Cabinet.

Thenasty · « **Reply #11 on:** March 22, 2004, 01:20:39 pm »

Here...


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: WTB : Nintendo Cab Monitor Mounts (Read 1602 times)

General Zod

WTB : Nintendo Cab Monitor Mounts

CitznFish

Re:WTB : Nintendo Cab Monitor Mounts

General Zod

Re:WTB : Nintendo Cab Monitor Mounts

General Zod

Re:WTB : Nintendo Cab Monitor Mounts

Thenasty

Re:WTB : Nintendo Cab Monitor Mounts

General Zod

Re:WTB : Nintendo Cab Monitor Mounts

Thenasty

Re:WTB : Nintendo Cab Monitor Mounts

Thenasty

Re:WTB : Nintendo Cab Monitor Mounts

General Zod

Re:WTB : Nintendo Cab Monitor Mounts

Thenasty

Re:WTB : Nintendo Cab Monitor Mounts

Thenasty

Re:WTB : Nintendo Cab Monitor Mounts

Thenasty

Re:WTB : Nintendo Cab Monitor Mounts