Author Topic: FS .870 Token Mechs w/ 250 tokens (pics inside) UPDATE ALL GONE (Read 3741 times)

Thenasty · « **on:** March 11, 2004, 01:02:46 pm »

Got lots of Coin Mech with Tokens. Tokens are bigger than a nickle and smaller than a quater.
Each Coin Mech is $10.00 w/250 Tokens (all same) +S/H.

**** UPDATE******

as of right now, I might be out of TOKENS, so i won't take any orders at this point. I will post back in a WEEK to see if there will be more left. The tokens I have right now are for those PPL that PM me stating they sent the CHECK or MO. So if you have not PM me about sending a CHECK or MO, you might be out of luck.

Thenasty · « **Reply #1 on:** March 11, 2004, 04:39:31 pm »

here are some pics you guys requested.

Thenasty · « **Reply #2 on:** March 11, 2004, 04:41:39 pm »

Coin Mechs

Thenasty · « **Reply #3 on:** March 11, 2004, 04:42:46 pm »

Bucket (Thousands_ .870 Tokens.....

abrannan · « **Reply #4 on:** March 11, 2004, 08:06:24 pm »

That's an awesome graphic on those tokens!

GodSend25 · « **Reply #5 on:** March 11, 2004, 10:51:46 pm »

Any discounts for lots of 4? Shipping to Toronto, Ontario?

Thenasty · « **Reply #6 on:** March 12, 2004, 08:26:00 am »

Been have alot of request for S/H.

you can check the rate.

http://postcalc.usps.gov/

for S/H.
Each Coin Mech w/250 Tokens are 3lbs Package.
Pick which one of the rate you wanted.
My Zip 07604

*edit* Just went to P.O and the lbs on each is 3.5lbs. Sorry for that guestimated weights.

SaiNRuB · « **Reply #7 on:** March 12, 2004, 10:01:28 am »

you have private mail for one mech and 250 gorilla tokens

marknetwork · « **Reply #8 on:** March 14, 2004, 08:19:01 pm »

Hello,

Can these mechs be used for the following:
http://www.arcadecontrols.org/yabbse/index.php?board=2;action=display;threadid=17123

Can they be setup to accept any coins or just tokens? Do they still accept quarters?

Thanks,
Mark

Thenasty · « **Reply #9 on:** March 15, 2004, 08:35:22 am »

coin mechs are all same (except what size coin they accept). You can just slap it in the any coin door (except nintendo ones) IMO.

This Mechs accepts this .870 size coin. It doesn't have to be just this COIN but any coin that is .870 in size. A nickle I think is .850 or so. This toekn is a little bigger than a nickle.

Thenasty · « **Reply #10 on:** March 15, 2004, 08:36:36 am »

for all that was interested/ordered. It is now 8:30 am and getting stuff ready to go to P.O. to get the S/H. You should be getting a PM from me soon.

Thenasty · « **Reply #11 on:** March 15, 2004, 09:14:33 am »

ok I got some good news, "I save alot of money by switching to Giecco"

Ok now thats out of the way, here comes the bad news. The package is 3.5lbs eac (1 Mech 250 Tokens).

Please check your PM's.

For others that are waiting for a certain day to order, don't worry, I got 50 or more to go and thousands more to go on tokens.

One other thing. If you are sending me an E-mail, please have Coin Mmechs on the subject line. Others that has no subject line gets deleted. T.Y.

marknetwork · « **Reply #12 on:** March 15, 2004, 01:18:17 pm »

I just have the coin door and eject buttons but that's all and I'd like to set it up through the X-arcade to accept the coin. Do you have the mechs and stuff that I'll need as well?

Thanks,
Mark

Thenasty · « **Reply #13 on:** March 15, 2004, 01:35:01 pm »

take a look at the pics. Thats what a Coin Mech looks like. Usually if you have the coin door, it comes with the unit that this COIN MECH get installed into.
The trigger is part of the whole Coin Door assemmbly. If your missing that, you need that as well. This switch is just just like any other buttons that uses uses a microswitch excet it has a wire sticking out of it so when the coin drops, it will catch that coin and trigger the switch. This switch is wired to your X-arcade encoder as #5 and #6 (MAME DEFAULTS).

marknetwork · « **Reply #14 on:** March 15, 2004, 01:42:53 pm »

Okay so I'll need some microswitches as well then. I'd like the mechs to accept tokens but also all other coins. I just have the coindoor and the eject buttons.

Everything else I need....do you have everything else.

Thenasty · « **Reply #15 on:** March 15, 2004, 03:17:22 pm »

if you want the coin mechs to accept TOkens and other coins, you need to get a Coin Mech that accepts those size coins your talking about. This will only accept .870 size coins. I mean you can play with it and will accept any size. I mean I have mopdified a couple of this babies to accept those new GOLD DOLLARS.

marknetwork · « **Reply #16 on:** March 15, 2004, 03:24:53 pm »

Oh! Okay I understand. What about the microchips and stuff where do I get those? I like the token idea though and will do that once I get the cabinet. I'll need 2 of them then with about 500-700 tokens I guess.

Thanks,
Mark

Thenasty · « **Reply #17 on:** March 15, 2004, 03:34:01 pm »

you mean the microswitches ?
here is a pic of a coin switch.

http://www.happcontrols.com/cc/42107500.htm

here is an explode view of a coin door.

http://www.happcontrols.com/coindoors/40600000_exploded.htm

marknetwork · « **Reply #18 on:** March 15, 2004, 06:00:42 pm »

Yeah those are exactly what I need! So in all all I need to setup the coins so it deposits in mame are:
- coin door
- eject buttons
- microswitches
- coin mechs + tokens

Do I need to power the microswitches or anything or when I connect them to the buttons on the X-Arcade it will automatically send power out...?

Thanks,
Mark

Thenasty · « **Reply #19 on:** March 15, 2004, 06:23:30 pm »

how are you inserting coin in now ? just take those 2 wires and put it in the switch. Take a look at your button switches, the coin swicth is the same thing but with an arm lever.

marknetwork · « **Reply #20 on:** March 15, 2004, 06:26:10 pm »

Right now I am just using the two side buttons on the x-arcade dual controller to insert coins.

thewhizard1 · « **Reply #21 on:** March 16, 2004, 02:11:59 am »

any discounts for 4 mechs and 250 tokens?

Thenasty · « **Reply #22 on:** March 16, 2004, 08:00:10 am »

your S/H will be alot cheaper

thewhizard1 · « **Reply #23 on:** March 16, 2004, 01:22:47 pm »

guess that works - $20 + shipping?

paypall or money order?

Thenasty · « **Reply #24 on:** March 20, 2004, 01:38:00 am »

*bump*

For those I PM that your check arrive, products will be sent out Saturday morning. Thank you for your orders.

Thenasty · « **Reply #25 on:** March 22, 2004, 09:19:39 am »

Here is the EMPTY Bucket.....Like I said, I'll update next week to see whats left (if check did not arrive from someone).

Thenasty · « **Reply #26 on:** March 25, 2004, 07:10:56 am »

ALL GONE ! ! !

marknetwork · « **Reply #27 on:** March 25, 2004, 12:52:04 pm »

Nooooooooooooooooooo! I finally have the arcade machine now and you're out?

lokki · « **Reply #28 on:** March 25, 2004, 10:16:38 pm »

Got mine in the mail today

Very cool looking coins.
(now if I can only figure out how to install it.....


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: FS .870 Token Mechs w/ 250 tokens (pics inside) *UPDATE* *ALL GONE* (Read 3741 times)

Author Topic: FS .870 Token Mechs w/ 250 tokens (pics inside) UPDATE ALL GONE (Read 3741 times)