Hi! Real sorry if this has been asked before but I can't figure it out on my own and Google gives me nothing.
I managed to configure my wiimotes properly thus far, using DemulShooter when necessary and my two dolphinbars. But now I encountered a bit of an issue…
Basically, I can't figure out how to use Dolphin with them. I know I can switch to the mode 4 but that would force me to do three things:
1) Manually change from mode 2 to mode 4
2) Remove my standard sensor bar and replace it with one of the dolphinbars for the leds (it apparently doesn't work otherwise…)
3) Resync one of the wiimotes to the dolphinbar.
Needless to say, this is far from being ideal.
So, I checked out on the wiki how to do it and I can indeed make the wiimote set as player 1 work, both with aiming and shooting but I cannot make the second one work. I think this has to do with it being set for Aimtraks rather than wiimotes… or did I miss something? Thanks a lot in advance!
Edit: it should be noted my wiimotes are detected as mouse input at the moment (with different HID, properly configured in DemulShooter).
Edit2: while I'm at it and although it's not strictly related to DemulShooter it could actually help me fix an issue I have with MAME (see attached pic).
What exactly is the id after Col01 between two #? I'm trying to have stable ids on MAME but I can't get it to work since the VID and PID are the exact same between the two wiimotes. I thought about using the physical address with devreorder but encountered the same problem. The only thing that seems to change is that number… which is quite peculiar. I guess if I knew the name of that thing I could find a way to fix it.