Author Topic: 400+ machines, now with some posted in the FS/FT section! (Read 24966 times)

Sarver Systems · « **on:** October 20, 2013, 11:06:19 pm »

As some of you may know, I am currently working on some machines.

I've got a good mix of standups, cocktail cabinets, cabaret, and I think there is even a few 2-player "pyramid" cocktails (not sure of the name, but I think its made by Nintendo. There's also quite a few pinball cabinets that we'll be turning into virtuals, a bunch of racing cockpits, a machine with a helmet that you wear, a couple of jukeboxes, and just a whole slew of "other" stuff.

I'll post pics of the machines, and what we're doing to them.

Some of the pics may be pretty boring, but you never know if someone can get some use out of them for artwork placement, original control panel layout, or something similar.

Pretty much everything you see in the pics is for sale, parts or whole, so if something jumps out at you, please PM me.

So here are the 1st 2 pics.

I'll call this "room 1".

This picture is of about 1/3 of the room. In the background is the first machine we finished. We had to swap out the control panel from 2 button + trackball to 4 button + joystick. It has a Jamma board in it, with a smaller 19" (I think) monitor in it.

This is one of the many antique games. We'll be restoring these, but I'm not 100% sure if they are for sale or not.

Yvan256 · « **Reply #1 on:** October 20, 2013, 11:41:29 pm »

Do you have any Rygar or R-Type cabinet(s) in your 400+ machines?

Sarver Systems · « **Reply #2 on:** October 20, 2013, 11:45:35 pm »

Can you give me an example?

<edit> A quick Google image search shows multiple cabinet styles. Are you looking for a specific shape/size cabinet? Or specific artwork?</edit>

Automark · « **Reply #3 on:** October 21, 2013, 05:10:55 am »

is that a red nintendo cab in the back? if so, it is probably one of the first ones.

Sarver Systems · « **Reply #4 on:** October 21, 2013, 08:11:21 am »

The one with the control panel sticking of, is not.
But the other one might be.

Yvan256 · « **Reply #5 on:** October 21, 2013, 08:26:07 pm »

Quote from: Sarver Systems on October 20, 2013, 11:45:35 pm

Quote from: Yvan256
Do you have any Rygar or R-Type cabinet(s) in your 400+ machines?
Can you give me an example?

<edit> A quick Google image search shows multiple cabinet styles. Are you looking for a specific shape/size cabinet? Or specific artwork?</edit>

I'm looking for the marquees because it seems impossible to find a scan of a Rygar marquee that was never cut and the scans for R-Type marquee are just plain bad. I would scan them and then use them in arcade marquee light boxes. I could also order a few more marquees that are in good shape, such as Black Tiger.

I would also very much appreciate photos of SNK Neo-Geo arcade machines if you have any, especially the backs and the speaker panels of the 2-slot and 4-slot models. Do you have any Neo-Geo MVS carts and their mini-marquees?

I think we could use more photos of your 400+ machines.

PL1 · « **Reply #6 on:** October 21, 2013, 08:35:56 pm »

Yvan256, Have you looked at the MAMELayPlus site?

They have a lot of fairly high-res marquees (samples attached) and embedded MAME layouts.

Scott

Sarver Systems · « **Reply #7 on:** October 21, 2013, 10:24:38 pm »

I was thinking you were referring to a specific style cabinet.

Now that I know you're looking for a specific a marquee, I'll take a look for you.

I'm heading out there Saturday, so I'll snap some more pics.

emphatic · « **Reply #8 on:** October 22, 2013, 12:55:22 pm »

Quote from: Yvan256 on October 21, 2013, 08:26:07 pm

I'm looking for the marquees because it seems impossible to find a scan of a Rygar marquee that was never cut and the scans for R-Type marquee are just plain bad. I would scan them and then use them in arcade marquee light boxes. I could also order a few more marquees that are in good shape, such as Black Tiger.

This is what I have:

Let me know if you want me to scan it. I have an A3 scanner, but I haven't had it plugged in for quite some time, so I can't promise it's operational.

Malenko · « **Reply #9 on:** October 22, 2013, 01:29:40 pm »

Sarver , where are you located?

Generic Eric · « **Reply #10 on:** October 22, 2013, 02:19:42 pm »

A collection of 400+ machines has to have a collection of loose boards too. Do you?

Sarver Systems · « **Reply #11 on:** October 22, 2013, 02:54:41 pm »

There are PILES and PILES of boards.

Sarver Systems · « **Reply #12 on:** October 22, 2013, 03:21:21 pm »

I am located in Sarver (ironic, isn't it?), but the machines are all located in downtown Pittsburgh.

Malenko · « **Reply #13 on:** October 22, 2013, 03:58:43 pm »

yeah, a list of boards would be great.

TKW4rr10r · « **Reply #14 on:** October 22, 2013, 04:09:54 pm »

Oh this could get interesting -real- quick depending on what you have here.

PA huh? Makes me wish I waited to move

But I would definitely be interested in some boards.

Sarver Systems · « **Reply #15 on:** October 22, 2013, 05:13:57 pm »

There are piles and piles of boards, scattered through-out 4 or 5 different rooms.

I'll see whats for sale and what isn't.

I didn't really want this to become a FS/FT thread. Once I get some more info on the stuff that's actually for sale, and what I have...I'll make a post in the proper forum.

For now, since I'm not selling anything, I guess its OK to keep posting your comments here.

Generic Eric · « **Reply #16 on:** October 22, 2013, 09:32:02 pm »

Quote from: Sarver Systems on October 22, 2013, 05:13:57 pm

For now, since I'm not selling anything, I guess its OK to keep posting your comments here.

Post more pics of the +400 machines. Folks love pics of warehouses.

Yvan256 · « **Reply #17 on:** October 22, 2013, 11:15:17 pm »

Quote from: emphatic on October 22, 2013, 12:55:22 pm

Quote from: Yvan256 on October 21, 2013, 08:26:07 pm
I'm looking for the marquees because it seems impossible to find a scan of a Rygar marquee that was never cut and the scans for R-Type marquee are just plain bad. I would scan them and then use them in arcade marquee light boxes. I could also order a few more marquees that are in good shape, such as Black Tiger.

This is what I have:

Let me know if you want me to scan it. I have an A3 scanner, but I haven't had it plugged in for quite some time, so I can't promise it's operational.

~~That has to be the best uncut Rygar marquee I have ever seen~~. And it seems to be in very good shape, too. I would be extremely grateful for a high resolution scan!

edit: nope, the top has been cut. See what I mean when I say it's impossible to find one that has not been cut? A high resolution scan would still be very useful because it's usually the bottom that has been cut.

Yvan256 · « **Reply #18 on:** October 22, 2013, 11:17:47 pm »

Quote from: PL1 on October 21, 2013, 08:35:56 pm

Yvan256, Have you looked at the MAMELayPlus site?

They have a lot of fairly high-res marquees (samples attached) and embedded MAME layouts.

Scott

Thanks PL1, I didn't know about that website.

harveybirdman · « **Reply #19 on:** October 22, 2013, 11:40:27 pm »

Quote from: Yvan256 on October 22, 2013, 11:17:47 pm

Quote from: PL1 on October 21, 2013, 08:35:56 pm
Yvan256, Have you looked at the MAMELayPlus site?

They have a lot of fairly high-res marquees (samples attached) and embedded MAME layouts.

Scott

Thanks PL1, I didn't know about that website.

Yep my frontend just got better thanks Scott.

I second the request for more picks of rows and rows of cabs... it's exciting.

emphatic · « **Reply #20 on:** October 23, 2013, 01:52:21 pm »

Quote from: Yvan256 on October 22, 2013, 11:15:17 pm

edit: nope, the top has been cut. See what I mean when I say it's impossible to find one that has not been cut? A high resolution scan would still be very useful because it's usually the bottom that has been cut.

Are you talking marquee or bezel? I'll see what I can do.

Sarver Systems · « **Reply #21 on:** October 23, 2013, 11:59:46 pm »

I'm heading back over on Sunday to do some work.

Are there any particular items you guy are looking to get pics of?

I'm already planning to get overall pics of machines and the rooms.

Malenko · « **Reply #22 on:** October 24, 2013, 08:13:54 am »

I'd really like some CPS2 games, street fighter, puzzle fighter, any of the VS games except MvC1; so if you can see if he has those, it'd be swell. Also a NeoGeo mobo and some games. My buddy who lives in Pittsburgh said he didnt mind picking things up and shipping them to me, so one less thing for you to worry about if you do decide to sell stuffs.

Sarver Systems · « **Reply #23 on:** October 24, 2013, 02:16:28 pm »

Got your PM. I'll see what I can do!

Yvan256 · « **Reply #24 on:** October 24, 2013, 11:21:26 pm »

Quote from: emphatic on October 23, 2013, 01:52:21 pm

Quote from: Yvan256 on October 22, 2013, 11:15:17 pm
edit: nope, the top has been cut. See what I mean when I say it's impossible to find one that has not been cut? A high resolution scan would still be very useful because it's usually the bottom that has been cut.

Are you talking marquee or bezel? I'll see what I can do.

I'm talking about the marquee, although a high-resolution scan of the bezel would also be welcomed.

Sarver Systems · « **Reply #25 on:** October 26, 2013, 12:54:20 am »

Here's a couple of quick pics of 2 puck bowlers I'm refurbishing.

The first one is a 1949 I think? It was the very first puck bowler, and started the fad.

This is a puck bowler as well. It needs a bit of wiring to be redone because the wires prevent the pucks from returning back to the front of the machine.

Sarver Systems · « **Reply #26 on:** October 26, 2013, 02:14:17 am »

Here's a few pics of the main arcade room.

Sarver Systems · « **Reply #27 on:** October 27, 2013, 11:11:07 pm »

Sarver Systems · « **Reply #28 on:** October 27, 2013, 11:19:51 pm »

Sarver Systems · « **Reply #29 on:** October 27, 2013, 11:51:37 pm »

Here are some antique games.

Sarver Systems · « **Reply #30 on:** October 27, 2013, 11:54:45 pm »

Some bowlers.

Sarver Systems · « **Reply #31 on:** October 27, 2013, 11:58:23 pm »

Some darts anyone?

Sarver Systems · « **Reply #32 on:** October 28, 2013, 12:01:30 am »

Some driving/racing machines.

Sarver Systems · « **Reply #33 on:** October 28, 2013, 12:09:48 am »

Tons of fighting games, too!

Sarver Systems · « **Reply #34 on:** October 28, 2013, 12:12:15 am »

A pair of flying games that I spotted.

Sarver Systems · « **Reply #35 on:** October 28, 2013, 12:15:34 am »

Who wants a megatouch?

I'll be testing these next. There are over 50 of them.

Sarver Systems · « **Reply #36 on:** October 28, 2013, 12:18:27 am »

I'll post more tomorrow. My webhost is glowing redhot from all the traffic right now.

yotsuya · « **Reply #37 on:** October 28, 2013, 12:22:26 am »

You got an Atari Video Pinball hiding in there?

Sarver Systems · « **Reply #38 on:** October 28, 2013, 12:26:43 am »

Not that I saw, but I did not see all the has been seen yet.

Make sense? Ha ha ha.

He's got another warehouse that I haven't even seen yet.
I didn't see one in the warehouse, but I may have missed it, or there may be one in another warehouse.

Can you provide a pic of one so I know what to look for?

SNAAKE · « **Reply #39 on:** October 28, 2013, 12:44:49 am »

can I have the capcom vs snk 2 cabinet


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news