Author Topic: CNC Cut Bartop Kits - Orders Open! New Models Available! (Read 854669 times)

HaRuMaN · « **Reply #2080 on:** June 30, 2015, 06:19:42 pm »

Yeah, I really need to get cracking on a driver bartop...

In another news, another day, another harubuck... 3 Nintendos, 1 baby Nintendo, and a slightly redesigned Defender (no more sharp corners, marquee retainers easier to install). Just have to pack up, now.

Sent from my LGLS740 using Tapatalk

sealcouch · « **Reply #2081 on:** June 30, 2015, 10:46:44 pm »

Quote from: HaRuMaN on June 30, 2015, 06:19:42 pm

Yeah, I really need to get cracking on a driver bartop...

In another news, another day, another harubuck... 3 Nintendos, 1 baby Nintendo, and a slightly redesigned Defender (no more sharp corners, marquee retainers easier to install). Just have to pack up, now.

Sent from my LGLS740 using Tapatalk

My hype knows no bounds.

Sent from my Nexus 6 using Tapatalk

HaRuMaN · « **Reply #2082 on:** July 03, 2015, 01:28:57 am »

So I went to the Amazing Arizona Comic Con earlier this year and had a couple comic books signed by Greg Capullo. I want to hang them up in the gameroom to display them, but I really didn't find much in the way of comic book frames. Solution? CNC some! First prototype, unpainted mdf and plexiglass:

Sent from my LGLS740 using Tapatalk

wp34 · « **Reply #2083 on:** July 03, 2015, 11:23:09 am »

Quote from: HaRuMaN on July 03, 2015, 01:28:57 am

So I went to the Amazing Arizona Comic Con earlier this year and had a couple comic books signed by Greg Capullo. I want to hang them up in the gameroom to display them, but I really didn't find much in the way of comic book frames. Solution? CNC some! First prototype, unpainted mdf and plexiglass:

Sent from my LGLS740 using Tapatalk

Nice! You are correct there isn't much out there for comic book frames. You could probably add these to your product offering.

sealcouch · « **Reply #2084 on:** July 03, 2015, 12:07:07 pm »

Quote from: HaRuMaN on July 03, 2015, 01:28:57 am

So I went to the Amazing Arizona Comic Con earlier this year and had a couple comic books signed by Greg Capullo. I want to hang them up in the gameroom to display them, but I really didn't find much in the way of comic book frames. Solution? CNC some! First prototype, unpainted mdf and plexiglass:

Sent from my LGLS740 using Tapatalk

This is pretty great. If you could find a way to produce them at a relatively low cost there would be a huge market for these.

HaRuMaN · « **Reply #2085 on:** July 03, 2015, 01:34:29 pm »

I gotta work out the numbers, but I think these should be fairly reasonable.

Sent from my LGLS740 using Tapatalk

HaRuMaN · « **Reply #2086 on:** July 06, 2015, 10:48:52 pm »

Ready to go!

Sent from my LGLS740 using Tapatalk

HaRuMaN · « **Reply #2087 on:** July 10, 2015, 03:42:45 pm »

So, if you have purchased a kit from me, could you do me a favor and hop over to my website and add a review? I would appreciate it. You have to be logged into your customer account to post.

Thanks!

http://shop.harumancustoms.com/index.php?route=product/category&path=59

sealcouch · « **Reply #2088 on:** July 11, 2015, 09:02:48 pm »

So here's a thing I'm working on:

I'm loving the kit. As soon as I finish the build I will add a review.

For some reason the back was just a few millimeters too large to fit. I was able to sand it down and get it in, but I thought you should know.

HaRuMaN · « **Reply #2089 on:** July 13, 2015, 09:40:03 am »

Looks great!!! Noted on the back. Sometimes when I'm drawing I make pieces the exact size to cover a gap, which doesn't work in the real world. I'll trim it down a hair in the drawing.

Ginsu Victim · « **Reply #2090 on:** July 13, 2015, 04:27:36 pm »

Quote from: HaRuMaN on February 18, 2013, 10:46:13 am

~~Current promotion, use coupon code BYOAC for $10 off your order (good through 12/31/2014)~~

From the original post in this thread....maybe time for an edit.

HaRuMaN · « **Reply #2091 on:** July 13, 2015, 04:29:37 pm »

Quote from: Ginsu Victim on July 13, 2015, 04:27:36 pm

Quote from: HaRuMaN on February 18, 2013, 10:46:13 am
Current promotion, use coupon code BYOAC for $10 off your order (good through 12/31/2014)

From the original post in this thread....maybe time for an edit.

Whoops. Fixed. At least I remembered to put an end date on the promotion.

Ginsu Victim · « **Reply #2092 on:** July 13, 2015, 04:35:11 pm »

One of these days I'm going to place an order, but dammit, this many years later, that time still hasn't arrived. It will happen....

Vertical bartop or cocktail cab....hmmmm......

HaRuMaN · « **Reply #2093 on:** July 13, 2015, 04:40:17 pm »

Do I need to make a new coupon to tempt you?

Ginsu Victim · « **Reply #2094 on:** July 13, 2015, 04:40:41 pm »

Quote from: HaRuMaN on July 13, 2015, 04:40:17 pm

Do I need to make a new coupon to tempt you?

No, you need to make a deposit in my bank account.

HaRuMaN · « **Reply #2095 on:** July 13, 2015, 04:41:32 pm »

Quote from: Ginsu Victim on July 13, 2015, 04:40:41 pm

Quote from: HaRuMaN on July 13, 2015, 04:40:17 pm
Do I need to make a new coupon to tempt you?

No, you need to make a deposit in my bank account.

Ginsu Victim · « **Reply #2096 on:** July 13, 2015, 04:42:49 pm »

Quote from: HaRuMaN on July 13, 2015, 04:41:32 pm

He laughs at my financial suffering....

HaRuMaN · « **Reply #2097 on:** July 13, 2015, 04:45:14 pm »

Quote from: Ginsu Victim on July 13, 2015, 04:42:49 pm

Quote from: HaRuMaN on July 13, 2015, 04:41:32 pm

He laughs at my financial suffering....

Not even, I've been there, believe me.

I make the bartops so I can afford this hobby.

Ginsu Victim · « **Reply #2098 on:** July 13, 2015, 04:48:39 pm »

Currently having to rebuild a privacy fence after Tropical Storm Bill kicked its ass, plus I had to replace the central air system (inside and out!), so the money is tight, but I pop in this thread occasionally to dream of a new project that's actually fun.

HaRuMaN · « **Reply #2099 on:** July 13, 2015, 04:51:01 pm »

Quote from: Ginsu Victim on July 13, 2015, 04:48:39 pm

Currently having to rebuild a privacy fence after Tropical Storm Bill kicked its ass, plus I had to replace the central air system (inside and out!), so the money is tight, but I pop in this thread occasionally to dream of a new project that's actually fun.

Yeah, we just replaced our upstairs AC / furnace about a month ago. That hurt...

yotsuya · « **Reply #2100 on:** July 13, 2015, 05:00:07 pm »

I'll donate my $50 in HaRuBuCks to Ginsu Victim if it helps the cause.

Oh, and try the coupon code "RICK" to see what you get!

Ginsu Victim · « **Reply #2101 on:** July 13, 2015, 10:13:39 pm »

Malenko · « **Reply #2102 on:** July 14, 2015, 07:10:44 am »

I'll toss some Harubux Ginsu's way

Ginsu Victim · « **Reply #2103 on:** July 14, 2015, 11:50:41 am »

Quote from: Malenko on July 14, 2015, 07:10:44 am

I'll toss some Harubux Ginsu's way

Do I have to strip? Make it rain!

HaRuMaN · « **Reply #2104 on:** July 14, 2015, 09:11:13 pm »

Quote from: Ginsu Victim on July 14, 2015, 11:50:41 am

Quote from: Malenko on July 14, 2015, 07:10:44 am
I'll toss some Harubux Ginsu's way
Do I have to strip? Make it rain!

Please no

Sent from my LGLS740 using Tapatalk

sporbillis · « **Reply #2105 on:** July 16, 2015, 02:34:47 pm »

Hey, don't want to be greedy or anything but is there any way any of you can supply cnc plans for a 2 player bartop with those nice curves? :/ Can't find anywhere

HaRuMaN · « **Reply #2106 on:** July 16, 2015, 02:38:07 pm »

Quote from: sporbillis on July 16, 2015, 02:34:47 pm

Hey, don't want to be greedy or anything but is there any way any of you can supply cnc plans for a 2 player bartop with those nice curves? :/ Can't find anywhere

Well, my widescreen is based on the degenatrons open source bartop, so I will share that one with you. PM incoming.

sporbillis · « **Reply #2107 on:** July 16, 2015, 02:45:20 pm »

Well that was fast, i am not allowed to reply back to personal messages dunno why. Some questions, the file you send me will open with any cnc software? I ll take it to a guy so i don't know his programs. Also which type of monitor that build takes? Thanks

sporbillis · « **Reply #2108 on:** July 16, 2015, 02:47:54 pm »

Ah , just read on your website it takes a 23 inch monitor.. Mine is 17inch, best case scenario i can find a 19inch :/

HaRuMaN · « **Reply #2109 on:** July 16, 2015, 02:48:31 pm »

Quote from: sporbillis on July 16, 2015, 02:45:20 pm

Well that was fast, i am not allowed to reply back to personal messages dunno why. Some questions, the file you send me will open with any cnc software? I ll take it to a guy so i don't know his programs. Also which type of monitor that build takes? Thanks

You need to have 5 posts to reply to PM's.

It's a DWG (autocad) file. Drawing is in inches. Your CNC guy should be able to import it into whatever software he is using to cut.

This one can take up to a 23" widescreen monitor (there is 22" of space available horizontally)

HaRuMaN · « **Reply #2110 on:** July 16, 2015, 02:50:21 pm »

Quote from: sporbillis on July 16, 2015, 02:47:54 pm

Ah , just read on your website it takes a 23 inch monitor.. Mine is 17inch, best case scenario i can find a 19inch :/

23" is just the max size.

Alternately, you could take my single player plans (1st post in this thread) and modify it with a 2 player panel. The single player works well with 17" monitor.

sporbillis · « **Reply #2111 on:** July 16, 2015, 02:52:16 pm »

Yea, basically i wanted to make 17-19inch bartop with 2 player controls, but i know nothing about drawing it up for a cnc or stuff like that. Anw, thanks for trying to help out!! Good kits

HaRuMaN · « **Reply #2112 on:** July 16, 2015, 10:18:41 pm »

Making progress on the new Big Red bartop:

Sent from my LGLS740 using Tapatalk

HaRuMaN · « **Reply #2113 on:** July 22, 2015, 10:01:13 pm »

Even more progress

Sent from my LGLS740 using Tapatalk

HaRuMaN · « **Reply #2114 on:** July 23, 2015, 02:36:38 pm »

0.7" cast acrylic

Sent from my LGLS740 using Tapatalk

fireslayer26 · « **Reply #2115 on:** July 30, 2015, 08:56:02 pm »

Quote from: HaRuMaN on July 13, 2015, 04:40:17 pm

Do I need to make a new coupon to tempt you?

I would be tempted!

Baezl · « **Reply #2116 on:** July 31, 2015, 09:15:38 am »

Quote from: 05SRT4 on April 03, 2015, 10:08:04 am

Hey guys,

Just wanted to share the Ultimate Widescreen kit I just finished for a friend.

Thanks again HaRuMaN, cant wait to order the next one.

Where did you buy the joysticks? Love this setup .Also how about the vinyl ? Links? Great colors.

Thanks
Luis

05SRT4 · « **Reply #2117 on:** August 03, 2015, 01:24:38 am »

Quote from: Baezl on July 31, 2015, 09:15:38 am

Quote from: 05SRT4 on April 03, 2015, 10:08:04 am
Hey guys,

Just wanted to share the Ultimate Widescreen kit I just finished for a friend.

Thanks again HaRuMaN, cant wait to order the next one.

Where did you buy the joysticks? Love this setup .Also how about the vinyl ? Links? Great colors.

Thanks
Luis

Thanks

Joysticks - Mag-Stik Plus
Vinyl - This Stuff

wooftangclan · « **Reply #2118 on:** August 05, 2015, 10:47:57 pm »

Just purchased my widescreen kit last night.
This will be my first build ever. Gonna do a RetroPie build since i'm already comfortable working with Raspberry Pi.
I just joined the forum and if someone could have Malenko PM me, that would be great. I'd love to commission him to do the art for my kit.

monkeybomb · « **Reply #2119 on:** August 06, 2015, 12:43:25 am »

What happened with the begging for a coupon? Did that pan out?


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news