CNC Cut Bartop Kits - Orders Open! New Models Available!

[Gilrock]

I was browsing that Minitendo on the website.  So its not clear to me those options for the marquee, bezel, and control panel plastics are you getting just the clear plastic or does it already have the artwork on the plastic?

[HaRuMaN]

I was browsing that Minitendo on the website.  So its not clear to me those options for the marquee, bezel, and control panel plastics are you getting just the clear plastic or does it already have the artwork on the plastic?

Just the clear plastic. The art I invoice separately for.

Marquee goes behind the Plexi, bezel is laminated vinyl that you apply to the Plexi, and control panel overlay is laminated vinyl that applies directly to the control panel.

[Gilrock]

Thanks...I'm thinking about it cause my son wanted a project to work on.  But every time I hint at another bartop my wife freaks out....lol.

[Mike A]

Put a strap on it. Tell her it is a purse.

[bsilverop]

What’s the difference between this company and GameroomSolutions?

[HaRuMaN]

What’s the difference between this company and GameroomSolutions?

This may help. 

https://www.reddit.com/r/cade/comments/hw225q/vendor_review_gameroomsolutionscom/

[bsilverop]

It helps me understand why I should have read that before ever ordering anything from GRS.. but what I’m not clear on is if these companies are owned by the same guy??

[HaRuMaN]

It helps me understand why I should have read that before ever ordering anything from GRS.. but what I’m not clear on is if these companies are owned by the same guy??

No they most definitely are not.  Haruman's Customs is owned by me (Lee) based out of Arizona.  GRS is Ryan?  Not sure where he is based. 

[bsilverop]

It helps me understand why I should have read that before ever ordering anything from GRS.. but what I’m not clear on is if these companies are owned by the same guy??

No they most definitely are not.  Haruman's Customs is owned by me (Lee) based out of Arizona.  GRS is Ryan?  Not sure where he is based.

Ugh, thanks. I meant to order from you but ordered from them instead and ended up with a $500 paper weight.

[HaRuMaN]

It helps me understand why I should have read that before ever ordering anything from GRS.. but what I’m not clear on is if these companies are owned by the same guy??

No they most definitely are not.  Haruman's Customs is owned by me (Lee) based out of Arizona.  GRS is Ryan?  Not sure where he is based.

Ugh, thanks. I meant to order from you but ordered from them instead and ended up with a $500 paper weight.

Oh man.  Sorry to hear that

[bsilverop]

Live and learn.. I had someone else waiting to see how mine came out before ordering, so I’ll send them your way instead!

[Slippyblade]

You'll not go wrong. Haruman is a stand up guy with great product. I just wish he had a cabaret kit!

[HaRuMaN]

You'll not go wrong. Haruman is a stand up guy with great product. I just wish he had a cabaret kit!

I have cabaret kits. 

[Slippyblade]

I didn't see em on the website. I'll go look, again.

[ZoNiE]

Hi, do you do full size models? I'm in AZ and can pickup if shipping is the issue with larger units.
Interested in an Asteroids or Full Berzerker...

[HaRuMaN]

Hi, do you do full size models? I'm in AZ and can pickup if shipping is the issue with larger units.
Interested in an Asteroids or Full Berzerker...

Yes I can do that.    Being in AZ makes it much easier.

[PatentGeek]

Nearly done with my widescreen bartop build and just have a few questions:

- The kit came with plastic marquee retainers (top and bottom). What should I use to secure them to the cabinet?

- There are vertical batons for the back panel – presumably to make it readily removable. What should I use to fasten the panel to the batons?

- What should I use to secure the control panel to the horizontal (slightly tilted) batons?

[HaRuMaN]

Wood screws for the marquee retainers.

I usually attach the top of the back door with hinges and use a small piece of velcro to adhere the back door to the batons

Control panel on that kit I usually attach with industrial velcro on the batons and the top of the admin panel.  ("paint" the top of the admin panel with a thin layer of glue and wait to dry, then apply velcro.  Will stick better that way since it's raw MDF there).

[PatentGeek]

Thanks, Lee! I think I might go with just velcro for the back panel, so it can be removed completely... any reason not to do that if the velcro is strong enough? (I have some velcro rated up to 15 pounds...)

[HaRuMaN]

Thanks, Lee! I think I might go with just velcro for the back panel, so it can be removed completely... any reason not to do that if the velcro is strong enough? (I have some velcro rated up to 15 pounds...)

You could do that too.