Vinyl Button Decals

[SlammedNiss]

Button labels are currently $12/set shipped (white or black) for a single set, or 2 for $20. Other colors available are $15/set shipped.

Custom decals are $0.50/decal. A $6 minimum purchase is required, unless included with a std. set of button labels. This allows for up to 10 decals.

Joystick surrounds are currently $5/pr. + $1 shipping, unless included with a set of button labels. Please specify which type (A-J) when ordering.

Please contact me regarding pricing on custom/personalized sets.

International 1st Class shipping add $2.

Payment can be made to Paypal via slammedniss at gmail dot com.  Please specify user name, color, and items wanted when placing order. Payment via "gifting" is always appreciated but not required.

If you need to contact me outside of this website, you can email me at the same email address above. This also goes for those who are new and unable to send PM's.

 

All button decals are sized to fit standard Happ 0.8125" buttons.

I currently have a single set of printed button decals shown below. I only have this one set and do not intend to make more. These are 7/8" in diameter.

Will be selling this set for $10 shipped.

[hyper x]

Hi,

Just joined for this.  Finally getting around to making an arcade pedestal from a nba jam TE control panel for mame instead of using my wii classic controllers for a more authenticate feel.  Really like this idea since I already have the buttons and don't want to re buy transparent ones for no good reason. 

Any way you can make them like this:



Basically red, blue, green and yellow for the p1 - p4 and for the 25 cents.  Everything else can be white.  I will pay extra if this is a possibility.  Just let me know.  Thanks.

Mike

[Endprodukt]

How much for shipping to Germany?

[Malenko]

how much for a galaga bezel thingie?

[chopperthedog]

Pm'd edited defender kick plate files. Hope you can make it happen.



good day.

[SlammedNiss]

Hi,

Just joined for this.  Finally getting around to making an arcade pedestal from a nba jam TE control panel for mame instead of using my wii classic controllers for a more authenticate feel.  Really like this idea since I already have the buttons and don't want to re buy transparent ones for new good reason. 

Any way you can make them like this:

<removed image>

Basically red, blue, green and yellow for the p1 - p4 and for the 25 cents.  Everything else can be white.  I will pay extra if this is a possibility.  Just let me know.  Thanks.

Mike

yes, can easily change up colors for an additional fee.

How much for shipping to Germany?

please PM me your shipping zipcode/postal code and I will get you an estimate.

how much for a galaga bezel thingie?

Monitor bezel?

Pm'd edited defender kick plate files. Hope you can make it happen.

Will be responding to your PM shortly.

[hyper x]

email sent regarding color change on the 8 icons being done like in the jpeg in post 2.  Thanks again.

Mike

[Malenko]

yeah the monitor bezel, not sure what other kind of bezel there is, especially on Galaga

[SlammedNiss]

email sent regarding color change on the 8 icons being done like in the jpeg in post 2.  Thanks again.

Mike

Never received email

yeah the monitor bezel, not sure what other kind of bezel there is, especially on Galaga

ok, just wanted to make sure that bezel wasn't interchanged with something else. As far as the bezel goes, I don't have a vector, only a large jpeg I found online. If you look closely, you will see imperfections that show up from the original scan.

THIS guy made a vector, but I highly doubt he'll just give it away.

[fudgeyall]

Didn't see you had a dedicated thread.  I'm not able to send you a PM for some reason, could you send me a message?  I want to purchase a set.

[Le Chuck]

This is a pretty clean galaga bezel PNG, haven't tried printing it at full size but it should work

[SlammedNiss]

This is a pretty clean galaga bezel PNG, haven't tried printing it at full size but it should work

That looks much better than what I was able to find. Lemme know the overall dimensions and I'll shoot you a price.

[hyper x]

pm sent instead and I linked pongos old sticky thread to your new thread incase anymore people post there instead of here. Thanks again.

Mike

[HaRuMaN]

Made this a sticky.   

[hyper x]

Paypal'ed sent.  Thanks again.

Mike

[SlammedNiss]

Just wanted to drop a quick note. I currently am out of white sets ATM, and don't know when I will make it down to my shop. We just got hammered with snow again tonight on top of what we already had last week. I'm paraplegic and it's difficult to leave the house with even just a couple inches on the ground. If you need black, blue, or red, I currently have a couple sets of each on hand. Otherwise, will probably be early next week before I can produce more. I'll make more than enough this next time and keep an abundance of white on hand.

Thx for understanding.

[SlammedNiss]

Plenty of white sets back in stock. Also, as of tomorrow (3/2/13) everything should be sent out. So, if you ordered from me you should already have it or have it within a few days.

Would love to hear some feedback.

[jwalther420]

Just sent you a paypal order for a set of black decals.  Thanks so much for doing this!

--Justin

[DrumAnBass]

Just sent an order for a set of white button decals, thanks!

[chopperthedog]

Received my package with the 2 color vinyl art....



  Love it. Thanks for accepting the challenge SlammedNiss!!!!



good day.

 

[SlammedNiss]

Wow, that was quick. Glad you like it!

Also, DrumAnBass, yours will mail out tomorrow. All other orders have been sent.

[fudgeyall]

No pictures, but I did receive my black set and they look great.  Thanks!

[DrumAnBass]

The labels arrived today, they look great! Thanks a ton! 

[jwalther420]

Received my set of black button graphics - great quality and they got here in just a couple of days.  Thanks a ton!

[chemikalguy]

PM Sent

[zabrin]

Received my black set.. They look great and got here real quick!!! Thanks again!!!

Z.

[hyper x]

Got them on Monday.  Sorry for the late reply.  They came out great and can't wait to get them on my buttons.  I'll have pictures up prob in two weeks when I finish up on my 4 player control panel.  Thanks again for doing to the extra colors goes great with my color player theme.  Just picked up green and yellow n64 controllers to go with my red and blue I had when the system launched to keep the theme lol.

Mike

[Dekieon]

is this sticky vinyl that you stick to the top of keys? Wouldn't they rub off?

[SlammedNiss]

Yes, this is colored vinyl with a sticky bottom. Should stay on the buttons, depending on how hard you mash the buttons.

Also, I am leaving for vacation next week, so any orders placed AFTER Wednesday 20th won't ship until AFTER April 2nd.

Thx!

[Ambaratur]

I received my set.  I was very happy with the shipping time and the quality of the product.  One problem though, I thought these were designed to fit on standard arcade buttons.  The "exit" one fit fine, but "pause" is far too long to fit on the button.  In my case I ended up using the pause symbol - two vertical lines.  I am not as happy with this as not all users of my system understand that symbol.

It would be good to let people know that not all the included images will fit on standard buttons.

[SlammedNiss]

My sizes were based upon pongo's original design. I can try and recut them smaller, but I'm already close to my machine's capabilities at less than 1/4" tall.

A PM would have been more appropriate to resolve this, don't you think?

[Patrickbutler]

I have the following sets available for purchase. I currently have white, blue, red, and black for purchase. Other colors available, just let me know what you want and I'll see if I have it in stock. Each set is $12 shipped, or 2 for $20.

Payment can be made to Paypal via slammedniss at gmail dot com.





I also have the ability to do cut vinyl and car parts digitally printed/laminated decals up to 54" wide. Example below is a monitor bezel decal I did for a friend's DK upright. Please let me know what you're looking for.

Looks pretty nice. I can pay you through paypal so are they still available or not?

[Ambaratur]

My sizes were based upon pongo's original design. I can try and recut them smaller, but I'm already close to my machine's capabilities at less than 1/4" tall.

A PM would have been more appropriate to resolve this, don't you think?

Nothing to be resolved.   

I complimented you on your fast shipping and the quality of the product.  Letting your potential customers know that some of the labels don't fit on a standard arcade button is a good idea and I don't think I did anything wrong by making that information public.  I would have liked to have known that before my order - it was my incorrect understanding that these were labels designed to be placed right on the buttons.

I am glad that you provide these items and I feel you are doing a great service to those who use these forums.

[Endprodukt]

Same "problem" here. Couldn't fit the pause. Very good quality though, still would have been good to know before ordering.

[SlammedNiss]

Well, I will see what I can do about getting them to fit. As of now, I'm not shipping anymore orders until I get back from my cruise. Not leaving until Saturday, but no time ATM to take on new orders.

[Dekieon]

I am in needing of getting a couple things cut in adhesive vinyl. Not button decals though, what I want is two small designs roughtly 2"x2", two in white and a second design similar in size, again two of them in yellow. Would you be able to cut these? I live in Canada, do you ship to Canada, what would the cost be?

Edit: Also when designing, does the art need to be reversed before being sent to you? I wouldn't want to get it back and find out that the adhesive is on the wrong side of the design.

[SlammedNiss]

I am in needing of getting a couple things cut in adhesive vinyl. Not button decals though, what I want is two small designs roughtly 2"x2", two in white and a second design similar in size, again two of them in yellow. Would you be able to cut these? I live in Canada, do you ship to Canada, what would the cost be?

Edit: Also when designing, does the art need to be reversed before being sent to you? I wouldn't want to get it back and find out that the adhesive is on the wrong side of the design.

shipping to canada usually doesn't run more than a couple dollars. Are you placing the decal underneath the substrate or on top? If you want it underneath, it would need reversed cut. On top, normal cut. Feel free to email me the design and I will take a look at it. I am just getting back from vacation so it will take me a few days to catch up with all PM's/emails.

[Dekieon]

I am in needing of getting a couple things cut in adhesive vinyl. Not button decals though, what I want is two small designs roughtly 2"x2", two in white and a second design similar in size, again two of them in yellow. Would you be able to cut these? I live in Canada, do you ship to Canada, what would the cost be?

Edit: Also when designing, does the art need to be reversed before being sent to you? I wouldn't want to get it back and find out that the adhesive is on the wrong side of the design.

shipping to canada usually doesn't run more than a couple dollars. Are you placing the decal underneath the substrate or on top? If you want it underneath, it would need reversed cut. On top, normal cut. Feel free to email me the design and I will take a look at it. I am just getting back from vacation so it will take me a few days to catch up with all PM's/emails.

It would be just placed on side of the cab so I am guessing that would be a normal cut. I will wait to send the email, as I am waiting for a part to come in that I need to get measurements from to finalize the one images size.

I assume .ai format is fine?

[wp34]

Payment sent for white vinyl set.

[SlammedNiss]

It would be just placed on side of the cab so I am guessing that would be a normal cut. I will wait to send the email, as I am waiting for a part to come in that I need to get measurements from to finalize the one images size.

I assume .ai format is fine?

yes, .ai, .eps, or .pdf is fine, as long as its vectored.

Payment sent for white vinyl set.

Will send them out on Wed.

[Dekieon]

I sent you the email with the images.

[retrostark]

slammedniss can i assume the the pricing for full cabinet's is different for each piece someone has you print? because I have been looking for a place to get some vinyls printed, and you seem to be fair. let me know some basic estimates on side art and marquees. (no measurements yet, sorry)

[darkSSide]

Do you the directional arrows around the joysticks and maybe the line around the buttons?

Sent from my DROID RAZR

[retrostark]

darksside in one of his example images there was directional arrows.

[darkSSide]

darksside in one of his example images there was directional arrows.

Hopefully your not talking about the arrows on the first row:-\
I'm looking more for ones that are already put together like the one gameongraffix.com sells.

Sent from my DROID RAZR

[retrostark]

well i was because that is what i thought you meant, but he is able to make custom pieces, so you can just send him and email with the art you want printed and the dimensions.

[SlammedNiss]

slammedniss can i assume the the pricing for full cabinet's is different for each piece someone has you print? because I have been looking for a place to get some vinyls printed, and you seem to be fair. let me know some basic estimates on side art and marquees. (no measurements yet, sorry)

I'd really need measurements before I can throw out an estimate.

Do you the directional arrows around the joysticks and maybe the line around the buttons?

Here are a few designs I can do. If you have something specific in mind, throw it my way and I'll see what I can do.

[darkSSide]

Here are a few designs I can do. If you have something specific in mind, throw it my way and I'll see what I can do.

I like "C" without the little arrows for my 4way.
Can you do these?

[SlammedNiss]

Yea. Do you have a better image than that?

[retrostark]

slammedniss i will get you something in the coming weeks. just keep posted on the thread.

[Louis Tully]

.

[TopJimmyCooks]

Thanks for taking up the Pongo button vinyl torch.  BTW the "pause" fits fine on Happs or GGG Classix concave buttons. 

[retrostark]

louis are you going to be puting this cabinet on a stand or anything? and personally (not harm no foul) i think that you cabinet looks a little plain right now. you need to add something to the actual shape of it to make it more appealing to the eye. 

[SlammedNiss]

Finished up cutting several more sets of white button decals today. Lemme know if you need anything.

[Brian74]

Can you make a set of PlayStation?

Sent from my Nexus 7 using Tapatalk 2

[SlammedNiss]

Can you make a set of PlayStation?

Sent from my Nexus 7 using Tapatalk 2

like the square, triangle, circle and X?

[Brian74]

Can you make a set of PlayStation?

Sent from my Nexus 7 using Tapatalk 2

like the square, triangle, circle and X?

Including L1, L2, R1, R2

Sent from my SGH-T989 using Tapatalk 2

[SlammedNiss]

Can you make a set of PlayStation?

Sent from my Nexus 7 using Tapatalk 2

like the square, triangle, circle and X?

Including L1, L2, R1, R2

Sent from my SGH-T989 using Tapatalk 2

Im sure I can. Send me a PM.

[tjarcade]

Hi - planning an order for you (glad you're doing this--thanks!)

Wondering if you can do (see pongo's old template below)...

custom simple (straight) labels
"custom lower" (curved to fit under a button)
"custom lower" (curved to fit over a button)
"lift & twist" labels (for 8-to-4 way joysticks)

[SlammedNiss]

Hi - planning an order for you (glad you're doing this--thanks!)

Wondering if you can do (see pongo's old template below)...

custom simple (straight) labels
"custom lower" (curved to fit under a button)
"custom lower" (curved to fit over a button)
"lift & twist" labels (for 8-to-4 way joysticks)

shouldn't be a problem. would take a couple days to get them vectored and cut.

[blashyrk]

Payment sent

[Pongo]

SlammedNiss:

Glad you have picked this up. If you would like, I can make all of my cut files available to you for further use.

I should be able to put these in any format you wish. ( .pdf, .svg, or .ai are the easiest formats for me if any of those work)

[SegaOutrun]

Im looking for

player 1 man
player 2 mans
25c (2x)
ESC
Power button (the circle with a line through it)
TAB
ABCD (2x)
XYZ (2x)

in black. I dont know how to make the files for letters. If it can be done, let me know and ill send the cash. I dont need any of the other stickers so, if you can do doubles on the same sheet, that would koo to have spares. 

[SlammedNiss]

SlammedNiss:

Glad you have picked this up. If you would like, I can make all of my cut files available to you for further use.

I should be able to put these in any format you wish. ( .pdf, .svg, or .ai are the easiest formats for me if any of those work)

I don't know how I missed this. I don't check this particular thread anymore, but instead use the "View New Posts" button. I must have skimmed right over it. I would really appreciate that Pongo. I didn't want to come out and just ask for your work, as most vinyl people are pretty stingy with their hard work. I'll send you a PM with my contact info.
Once again, thank you!

Im looking for

player 1 man
player 2 mans
25c (2x)
ESC
Power button (the circle with a line through it)
TAB
ABCD (2x)
XYZ (2x)

in black. I dont know how to make the files for letters. If it can be done, let me know and ill send the cash. I dont need any of the other stickers so, if you can do doubles on the same sheet, that would koo to have spares.

Please send me a PM and we can work out the details.

I am going into surgery on Aug. 1, so I don't know how much downtime I will have. If somebody needs a set of button decals that I have in stock, it won't be an issue. However custom orders might be delayed.

[Malenko]

can you do chrome / silver?

[yotsuya]

Just wanted to give a shout out to Pongo for unselfishly offering his files. Solid move.

[SlammedNiss]

can you do chrome / silver?

Have both. Not sure how well chrome would cut on the smaller lettering though.

[Malenko]

can you do chrome / silver?

Have both. Not sure how well chrome would cut on the smaller lettering though.

I just need P1 and P2 start buttons , in which ever is more metallic looking. I dont mind paying a couple of bucks for just 2 decals.LMK

[oaz]

I send you a pm.

[SlammedNiss]

I send you a pm.

Never received a PM.

[oaz]

sorry I've sent the message to your email.
Have you check it?

Ok i did it. Check the Pm box.
Thank you

[Rick]

PM sent!

[sealslayer]

PM sent regarding large batch of p1 & p2 icons.

[Hockeyboy]

SlammedNiss (or anyone else that might know)...

The sheets shown at the top of this thread - are they the only ones available? A bit further down in the thread TJArcade displayed a file that was from Pongo, and then Pongo replied stating he'd send you copies of the files he had so you could use them. Is there a way we can get pictures of all the available sheets? I'd like to buy one with some of the words, but I'd rather have the word COIN instead of the 25 cents. In white, please.

Thanks in advance!!

[SlammedNiss]

SlammedNiss (or anyone else that might know)...

The sheets shown at the top of this thread - are they the only ones available? A bit further down in the thread TJArcade displayed a file that was from Pongo, and then Pongo replied stating he'd send you copies of the files he had so you could use them. Is there a way we can get pictures of all the available sheets? I'd like to buy one with some of the words, but I'd rather have the word COIN instead of the 25 cents. In white, please.

Thanks in advance!!

He hasn't sent me any files yet, but I've been able to replicate most things so far. I am however still down for a few weeks as I recover from surgery.

[Malenko]

Is there a size limit to what you can print? I thought about replacing my Galaga with a repro but decided to keep the original one.... however, I was considering making a custom bezel for my ShoRyuKade, but I wont lie, its pretty big. like 25" wide and 32" tall. I'll measure to be safe but I wanted to see if its even an option.

[SlammedNiss]

Is there a size limit to what you can print? I thought about replacing my Galaga with a repro but decided to keep the original one.... however, I was considering making a custom bezel for my ShoRyuKade, but I wont lie, its pretty big. like 25" wide and 32" tall. I'll measure to be safe but I wanted to see if its even an option.

Print/laminate max is either 52" or 54". I never remember which.

[Rick]

Print/laminate max is either 52" or 54". I never remember which.

So, it's 52" (or 54") x infinite? Or do you have a length max too?

[SlammedNiss]

Print/laminate max is either 52" or 54". I never remember which.

So, it's 52" (or 54") x infinite? Or do you have a length max too?

Length is only limited by the length of the roll, which is normally 100 yds.

[Hockeyboy]

SlammedNiss (or anyone else that might know)...

The sheets shown at the top of this thread - are they the only ones available? A bit further down in the thread TJArcade displayed a file that was from Pongo, and then Pongo replied stating he'd send you copies of the files he had so you could use them. Is there a way we can get pictures of all the available sheets? I'd like to buy one with some of the words, but I'd rather have the word COIN instead of the 25 cents. In white, please.

Thanks in advance!!

He hasn't sent me any files yet, but I've been able to replicate most things so far. I am however still down for a few weeks as I recover from surgery.

I understand about surgeries and being down...I was out of work this year for 7 months due to 2 major abdominal surgeries.

Anyway, what's your guess on when you could get a sheet of the white letter/symbol sheets cut and sent? I'm not in a mad rush but just curious what kind of lead time I'm looking at?  Thanks.

[SlammedNiss]

I understand about surgeries and being down...I was out of work this year for 7 months due to 2 major abdominal surgeries.

Anyway, what's your guess on when you could get a sheet of the white letter/symbol sheets cut and sent? I'm not in a mad rush but just curious what kind of lead time I'm looking at?  Thanks.

If you mean a set of these I have a few sets on hand. Just need payment and an address.

[Hockeyboy]

I understand about surgeries and being down...I was out of work this year for 7 months due to 2 major abdominal surgeries.

Anyway, what's your guess on when you could get a sheet of the white letter/symbol sheets cut and sent? I'm not in a mad rush but just curious what kind of lead time I'm looking at?  Thanks.

If you mean a set of these I have a few sets on hand. Just need payment and an address.

Thank you!  PM sent. 

[TopJimmyCooks]

Mr. Niss:  sorry if this has been asked before.  do you have a color chart or site to reference for same?  would it be possible to do an alien green or is there such thing as glow in the dark vinyl?

I totally realize you're not buying full custom rolls of vinyl to do these little things for 12$.  Let me know what the possibilities are.  Thank you sir. 

[SlammedNiss]

Mr. Niss:  sorry if this has been asked before.  do you have a color chart or site to reference for same?  would it be possible to do an alien green or is there such thing as glow in the dark vinyl?

I totally realize you're not buying full custom rolls of vinyl to do these little things for 12$.  Let me know what the possibilities are.  Thank you sir.

there is a thing as GITD vinyl, but we don't stock it. Sorry.

[TopJimmyCooks]

No prob on the GITD.  these things are probably too small to read the glow very much. 

Do you have:
1st choice:  lime green
2nd choice:  dark green
3rd choice: gray

If not, I'll go with the stock red.   Let me know and I'll PM to order a set.  Hope all is going well with your recovery and I've got plenty of time on this one.  Thanks.

[DeLuSioNal29]

I had an idea and wanted to see if you were interested in trying it.  How about creating an arcade themed "family vinyl car sticker" similar to the following:


But instead on the left you can have a graphic similar to this:


Thoughts?

DeLuSioNaL29

[Rick]

Thoughts?

I would totally buy these. Unfortunately, my cab isn't finished. Can you make one of them "half a cab"?

[SlammedNiss]

No prob on the GITD.  these things are probably too small to read the glow very much. 

Do you have:
1st choice:  lime green
2nd choice:  dark green
3rd choice: gray

If not, I'll go with the stock red.   Let me know and I'll PM to order a set.  Hope all is going well with your recovery and I've got plenty of time on this one.  Thanks.

I think I have lime green, but I'll have to check next time I head down. Gonna try and make it later this week again.

I had an idea and wanted to see if you were interested in trying it.  How about creating an arcade themed "family vinyl car sticker" similar to the following:
<<OP removed image>>

But instead on the left you can have a graphic similar to this:
<<OP removed image>>

Thoughts?

DeLuSioNaL29

I'm sure I can, just need to digitize the graphic.

[AntiBravoman]

Hey SN, I'm new here (obvious by my post count lol) and I was looking to order a set of vinyl decals for you to customize an iCade for a friend of mines for Xmas.

I have the designs already done and ready to go in .PDF format. I wanted to know how much do you think it would be to print these up, cut them, and send them to me? (I'm in the US.. NYC to be exact).

I would have PM'd you, but it's saying I don't have permission to do that yet. After this one I'm also looking for another similar job to be done, but I have to finalize the designs.

Thanks for any help you can give me!

[SlammedNiss]

Hey SN, I'm new here (obvious by my post count lol) and I was looking to order a set of vinyl decals for you to customize an iCade for a friend of mines for Xmas.

I have the designs already done and ready to go in .PDF format. I wanted to know how much do you think it would be to print these up, cut them, and send them to me? (I'm in the US.. NYC to be exact).

I would have PM'd you, but it's saying I don't have permission to do that yet. After this one I'm also looking for another similar job to be done, but I have to finalize the designs.

Thanks for any help you can give me!

Send me an email at slammedniss at gmail.com with the artwork and sizes you need.

[Jack Burton]

How well would the vinyl do as a board game surface?  I need to make a 20" chess board, and I thought perhaps I could stick the vinyl to a piece of 3/4" oak for a board. 

[SlammedNiss]

How well would the vinyl do as a board game surface?  I need to make a 20" chess board, and I thought perhaps I could stick the vinyl to a piece of 3/4" oak for a board.

If the surface is prepped correctly, then it will work great.

[BrianJ1985]

I would like to purchase the black set and the white set of button decals.

[SlammedNiss]

I would like to purchase the black set and the white set of button decals.

I will need to check to see what colors I currently have on hand and will get back to you.

[BrianJ1985]

ok, thanks

[SlammedNiss]

I need to cut more black sets. Will be a few days before I can get down to the shop, possibly next week.

[SlammedNiss]

I have 1 black set available Brian if you're still interested.

[dclark61]

SlammedNiss, this is a pretty cool service you're providing here.  Thanks.

Do you have any white sets availalble (http://i684.photobucket.com/albums/vv208/fluid_matrix/arcade_zps836cccde.jpg)?

[SlammedNiss]

SlammedNiss, this is a pretty cool service you're providing here.  Thanks.

Do you have any white sets availalble (http://i684.photobucket.com/albums/vv208/fluid_matrix/arcade_zps836cccde.jpg)?

Yes, I freshly cut some earlier this week.

Brandon

[dclark61]

SlammedNiss, this is a pretty cool service you're providing here.  Thanks.

Do you have any white sets availalble (http://i684.photobucket.com/albums/vv208/fluid_matrix/arcade_zps836cccde.jpg)?

Yes, I freshly cut some earlier this week.

Brandon

Email sent ... thanks!

[SlammedNiss]

Email sent ... thanks!

Never received an email?

[dclark61]

Email sent ... thanks!

Never received an email?

Huh; I emailed to your gmail address, not sure what happened there.

Anyway, I was re-reading the thread and saw the post with Pongo's old template ... was wondering if I could get some labels from that.  Do you need to do the entire sheet, or can you do just parts of it?

Thanks again.

[SlammedNiss]

Huh; I emailed to your gmail address, not sure what happened there.

Anyway, I was re-reading the thread and saw the post with Pongo's old template ... was wondering if I could get some labels from that.  Do you need to do the entire sheet, or can you do just parts of it?

Thanks again.

Just lemme know what you need, and I can get you a price from there.

[dclark61]

Huh; I emailed to your gmail address, not sure what happened there.

Anyway, I was re-reading the thread and saw the post with Pongo's old template ... was wondering if I could get some labels from that.  Do you need to do the entire sheet, or can you do just parts of it?

Thanks again.

Just lemme know what you need, and I can get you a price from there.

I'd like two of row 3b, one of row 3e, and one of row 1e.  Thanks.

[SlammedNiss]

I'd like two of row 3b, one of row 3e, and one of row 1e.  Thanks.

Sending PM.

[jordanshadow]

PM sent. I am looking for 2 black joystick surrounds. Also, in white x1 each: player 1, player 2, admin, exit

[thomas_surles]

Just received my stuff and I am very happy with it.  Great work.

[jordanshadow]

Got my items a few days ago and they are very nice. I messed up one of them though and need to do a small reorder  . I have a space invader graphic that would be fun to try out as well. Sending you a pm to see what we can do.

[Bennyv07]

Hi, I just registered to this forum specifically for these decals. How do I PM? I've tried clicking on SlammedNiss but it keeps saying I am not authorized to do so. I can only send an email.

[Slippyblade]

Hi, I just registered to this forum specifically for these decals. How do I PM? I've tried clicking on SlammedNiss but it keeps saying I am not authorized to do so. I can only send an email.

Gotta have a certain number of posts before you can PM.  Maybe just send a normal email?

[Sarver Systems]

Do you offer these with the joystick directional arrows as well?

I see a few people mentioning it, but no pics of the final product.

I would be interested in a 2 player set, with 6 buttons each, plus P1/P2 buttons.

[SlammedNiss]

send me a PM or email and let me know everything you need. Joystick surround samples are shown in the OP.

[Malenko]

can ya do NHL logos for the buttons? or even Philadelphia Flyer logos? Need 4.

[SlammedNiss]

can ya do NHL logos for the buttons? or even Philadelphia Flyer logos? Need 4.

Would have to be printed. Just the Flyer logo? Or did you have others in mind?

[Malenko]

can ya do NHL logos for the buttons? or even Philadelphia Flyer logos? Need 4.

Would have to be printed. Just the Flyer logo? Or did you have others in mind?

Just the Flyers ( to go with my not yet announced project Im considering starting: http://forum.arcadecontrols.com/index.php/topic,138619.0.html )

[SlammedNiss]

Just the Flyers ( to go with my not yet announced project Im considering starting[/url] )

A set of 4 would set you back $6.

[Malenko]

PM'ed yuo my paypal addy, send me a request or reply with yours and I'll send payment as gift.

[thomas_surles]

Do you offer these with the joystick directional arrows as well?

I see a few people mentioning it, but no pics of the final product.

I would be interested in a 2 player set, with 6 buttons each, plus P1/P2 buttons.

here is a pic of my cp.

[JeebsFat]

PM sent

[BladeZX]

SlammedNiss,

Are you still doing the vinyl?
If so I need some for my bartop.

I will be using Ultralux buttons (likely the chrome ones) and I need some labels similar to this look

http://forum.arcadecontrols.com/index.php/topic,113965.msg1210291.html#msg1210291

If you are still doing it let me know and I will get you what I need.
Do they come already cut for the button?

Thanks

[SlammedNiss]

I will be using Ultralux buttons (likely the chrome ones) and I need some labels similar to this look

If you are still doing it let me know and I will get you what I need.
Do they come already cut for the button?

Thanks

Yes, still doing them, and yes they come ready to apply to the button. 

[BladeZX]

Thanks for getting back to me
OK I will get together what I need this weekend and let you know

[KevinFlynn]

Hi SN,

I stumbled upon this post (since Pongo no longer does these...)
I would like to place an order but I have some custom requests.

1) White is fine but I would love for my decals to be chrome. Is that possible?

2) There's a vertical stabilizer for the mouse when playing golf games. Could I get a golf ball printed that would fit on a standard concave button?

I will also send you an email right now.

Thanks in advance!!

Markus

[KevinFlynn]

Hi Brandon,

Not sure why you don't get emails sometimes...seems like a trend in this thread   Do you have an alternate email you can PM me - or would you please send me an email so I know it's correct before I paypal money?

Here are the golf ball images.  I am including the larger images so you may size it as nec.  I think I like the one with the word Mame in rainbow best.  My second choice would be the orange.  I will get you funds today as soon as you verify your email, thanks!

Markus

[KevinFlynn]

...Or, orange with the little '1'...

[SlammedNiss]

Not sure why you don't get emails sometimes...seems like a trend in this thread

Not really a problem of not always getting email, just a matter of finding the time to respond.

[Rick]

PM sent, good sir!

[janey]

I just purchased a backglass for my space invaders deluxe and just broke it..... ((
Can i get a print of it and apply it too a glass


I hate to buy another one...

[KevinFlynn]

Not sure why you don't get emails sometimes...seems like a trend in this thread

Not really a problem of not always getting email, just a matter of finding the time to respond.

Cool. It's all good now! Order placed.

[SlammedNiss]

I just purchased a backglass for my space invaders deluxe and just broke it..... ((
Can i get a print of it and apply it too a glass


I hate to buy another one...

Do you have a source for the artwork?  If so, yes I can do this.

[Rick]

Order placed, good sir! Thanks again!

[KevinFlynn]

Got the decals today and made a lot of progress because of their arrival.
They look killer, very pleased! 

Thanks!

[muffles]

I'm trying to get some of these decals and sent an email through the site (I think - not familiar with the layout, was looking for a PM button). Is there a better way to request these?

[SlammedNiss]

I'm trying to get some of these decals and sent an email through the site (I think - not familiar with the layout, was looking for a PM button). Is there a better way to request these?

feel free to contact me directly @ slammedniss @ gmail . com.

[Scorpie]

Great service from SlammedNiss, quick reaction on my questions hope the surrounds and button inlays arrive soon 

[muffles]

I'm trying to get some of these decals and sent an email through the site (I think - not familiar with the layout, was looking for a PM button). Is there a better way to request these?

feel free to contact me directly @ slammedniss @ gmail . com.

Thanks, I just sent you an email!

[knightrdrx]

has anyone fit the 5 letter words on standard buttons? I'd like to use the pause and reset or i can use the 2 bars i suppose.

[BobA]

Payment sent.

Order Received Aug 19, 2014

Thanks for the quick service.

[TopJimmyCooks]

knightrdrx, the start and pause full text will roll up onto the raised edges of concave buttons.  May not hold up to hard use.  Although my pongo era vinyl has held up for several years of light use.

[BobA]

If they are several years old they are probably Pongo's vinyl.  The vinyl supplied by SlammedNiss size is different so they may not fit the buttons as you remember.  Attached are both types of vinyl that have been scanned in to compare size.  The uncut sheet(s) are the new ones supplied by SlammedNiss.

Just for info purposes.

[knightrdrx]

Are you saying the new ones 5 letters long might fit a concave button? I have an X-arcade controller.
I'd like to order a white set.  The one with the 25cent, pause, players 1-4 etc.

[BobA]

What I was showing is that the new ones were a tiny bit bigger so did not fit fully on the button as well.   Hold off or a few days ordering from SlammedNiss as I have sent him some of my original decals for comparison so he can determine the best size.   Sent them earlier this week so they should be there next week.  Canada to USA.

[knightrdrx]

if that doesn't work out maybe i'll just put the 25cent on the buttons and print or put some labels on the custom control board overlay as long as i don't decide to change them.   

[SlammedNiss]

Doing a test cut tomorrow.

[knightrdrx]

What are the results??

Doing a test cut tomorrow.

[SlammedNiss]

What are the results??

Doing a test cut tomorrow.

From here on out, all 5 letter words should fit a 0.8125" standard Happ button.

[BobA]

Sounds good.  Could you please send me some 5's to replace the oversized ones.

Thanks

[SlammedNiss]

Sounds good.  Could you please send me some 5's to replace the oversized ones.

Thanks

PM what you would like and I'll get it cut this coming week in appreciation for your help.

[BobA]

Thanks.  The following quantity of 5 letter words need to be redone at the new size.

5 RESET
5 LISTS
5 PAUSE
5 ADMIN
5 TURBO

[Dwinstan]

Hi SlimmedNiss

I have recently purchased an arcade machine and need some button decals for my new white led buttons.

Been looking everywhere for some good button decals but they're really hard to find. These would look great on my Happ 0.8125" buttons.

Do you know if the button decals are cut out around the letters? Or are they just circle discs?

Also would you post to the UK?

Many thanks
Dave

[SlammedNiss]

Hi SlimmedNiss

I have recently purchased an arcade machine and need some button decals for my new white led buttons.

Been looking everywhere for some good button decals but they're really hard to find. These would look great on my Happ 0.8125" buttons.

Do you know if the button decals are cut out around the letters? Or are they just circle discs?

Also would you post to the UK?

Many thanks
Dave

I can do either way.

[Dwinstan]

Hi SlimmedNiss

Can you PM me your email address so I can request an order? Tried to PM you but it says I do not have the right permissions.

Cheers
Dave

[SlammedNiss]

Hi SlimmedNiss

Can you PM me your email address so I can request an order? Tried to PM you but it says I do not have the right permissions.

Cheers
Dave

you can use the email address in the OP on page 1.

[SlammedNiss]

Selling arcade button decal sets 6 sets at a discounted price. Info located in the OP.

[BobA]

Got my updates to smaller vinyl and some old assorted sets over the Holidays.  Great work as usual.  Sorry got busy and forgot to post that everything was received in good order.  Probably delayed with the Christmas Rush of mail at Canada Post.

Thanks BobA

[fireslayer26]

Payment sent for the 2 blue button label sets.

[tkersting]

Got my decals a few days ago.  Good quality and he 5 letter words fit great on my buttons. Thanks for the product.

[knightrdrx]

Just want to say my decals work great incliding the 5 letter ones. Need a few more

[jdjuggler]

Are these sets still available?
JD

[SlammedNiss]

Are these sets still available?
JD

Absolutely. I usually have black and white sets on hand at home. Any other colors will take a couple days for me to get to the shop and get them cut.

[eezeetee]

I'm interesting as well.  Just curious though, do these fit the traditional happ buttons?

[SlammedNiss]

These are designed to fit Happ 0.8125" buttons.

[eezeetee]

These are designed to fit Happ 0.8125" buttons.

Any chance they can be resized to fit the 0.87 standard HAPP button?

[SlammedNiss]

They would only be slightly larger than they are now.

[copyimitation]

Are these decals still for sale? And to get this straight, these are vinyl decals that will stick onto standard arcade buttons?

[SlammedNiss]

Are these decals still for sale? And to get this straight, these are vinyl decals that will stick onto standard arcade buttons?

still for sale, and correct, they are adhesive backed vinyl decals.

[the_greeze]

Excellent!  You have email 

[Phreakwars]

Sent you a PM, hopefully you got it, it doesn't show up in my "sent message" folder.

[Dutsk]

Could you do playstation themed button sheet. Ie: xo triangle Square L1 R1 etc.?

[SlammedNiss]

Could you do playstation themed button sheet. Ie: xo triangle Square L1 R1 etc.?

yup, in fact I already have the X,O,triangle,square in my files.

[DocHolliday]

The button decals were perfect.   Great product and easy transaction.   Added a pic with a few installed (coin, esc, enter).

In fact, I need to order another set from you slammed, I have a couple more panels I need button decals for.

I may try some type of clearcoat over the decal, just to see if I can protect them from wearing off over time.

[Dutsk]

Could you do playstation themed button sheet. Ie: xo triangle Square L1 R1 etc.?

yup, in fact I already have the X,O,triangle,square in my files.

Could you quote me for two sets of them I would need a full player one and a full player two. Not sure what color as I have some white and black buttons in CP. Thanks!!

-Matt

[SlammedNiss]

Not sure what color as I have some white and black buttons in CP. Thanks!!

-Matt

PM sent.

[SlappyKungFuGrip]

Greetings!
 For some reason I cant send you pm.
How much for shipping to Norway? ☺

[Le Chuck]

Greetings!
 For some reason I cant send you pm.
How much for shipping to Norway? ☺

You need at least 5 posts.  Go post some more and it will magically appear. 

[SlammedNiss]

Greetings!
 For some reason I cant send you pm.
How much for shipping to Norway? ☺

You can also email me directly at the email listed in the OP.

Shipping to Norway runs $2 extra.

[PL1]

Welcome aboard, SlappyKungFuGrip.   

Are your PMs working now?


Scott

[SlappyKungFuGrip]

Thanks!!
I stil need some more posts☺

[PL1]

Thanks!!
I stil need some more posts☺

Saint changed the settings recently, but nevermind now that you've posted several more times.
(unless your PMs are still not enabled)


Scott

[SlappyKungFuGrip]

Thanks!!
I stil need some more posts☺

Saint changed the settings recently, but nevermind now that you've posted several more times.
(unless your PMs are still not enabled)


Scott

Pms are enabled☺☺

[Suilenrocc]

Plan on ordering these once my PM is enabled too :-D

[fireslayer26]

I'm sending payment for 1 set button labels. Black in color.

Thanks

[Zeosstud]

I would like a quote on some labels to finish up my Golden Tee / Trackball Pedestal

Black - Left or Left Arrow or Aim Left, Right or Right Arrow or Aim Right, Back or Backspin or Something for the Backspin Button and a Coin Buttler, $ or .25 or something..
White - Esc, Tab, Enter, Start and Fly or Fly Over or Something for the Fly Over Button..

http://forum.arcadecontrols.com/index.php/topic,147307.msg1533376.html#msg1533376

Link to the Project as is..


Thanks!!

[fireslayer26]

Sending payment for a set of WHITE button labels.

Thanks!

[mikeclark22]

Sir,

I'm looking to use the Classic RGB LED Pushbuttons from Ultimarc, I was wondering if you have any suggestions for color wise.  My overall them so far is just using Black and Blue.

Thank you for any input,
Mike

[SlammedNiss]

Sir,

I'm looking to use the Classic RGB LED Pushbuttons from Ultimarc, I was wondering if you have any suggestions for color wise.  My overall them so far is just using Black and Blue.

Thank you for any input,
Mike

If using backlit  buttons, the vinyl will almost always appear black or dark in color unless using translucent vinyl which I dont offer.

[mikeclark22]

Yes Sir, thank you for such a quick response.  That's kinda of what i thought, but i think it be alright.  to setup an order just send a message to the email on OP?

Thanks again,
Mike

[SlammedNiss]

Yes Sir, thank you for such a quick response.  That's kinda of what i thought, but i think it be alright.  to setup an order just send a message to the email on OP?

Thanks again,
Mike

yessir. that is usually the easiest way for me to keep track of orders.

[ballboff]

are these still available?  And can i get them in UK?

[SlammedNiss]

are these still available?  And can i get them in UK?

Yes, still sending these out. International shipping runs an additional $2 outside of the USA.

[SlammedNiss]

I have updated the OP with new prices. White or blacks sets will remain at $12/1 or $20/2. All other colors are now $15 shipped as if I try and keep them on hand, they go bad before I sell them. Custom sets will be available but only in addition to a regular set. Also, I am no longer offer partial sets, only full sets from here on out. Sorry for the changes, but being paraplegic has taken it's toll on my body and I don't make it to the shop as often anymore. Thanks for understanding.

[Hockeyboy]

Just sent a payment to your PayPal account. Thanks for keeping this going! Your last set was great, but I didn't use them all and the ones I didn't use are curling and peeling, rendering them unusable.

[SlammedNiss]

Just sent a payment to your PayPal account. Thanks for keeping this going! Your last set was great, but I didn't use them all and the ones I didn't use are curling and peeling, rendering them unusable.

Yea, they will go bad if they aren't applied to something within a certain time frame. Anyways, payment received. I should be able to get these mailed out today. (Saturday the 26th)

[TheMadHatter]

This is a sweet service man can't wait til I'm at the point where I can look for stuff like this lol


Sent from my iPhone using Tapatalk

[chaseruk]

Hi SlammedNiss
What colour do the joystick surrounds come in ?
thanks
paul

[SlammedNiss]

Hi SlammedNiss
What colour do the joystick surrounds come in ?
thanks
paul

all joystick surrounds are cut at the time of order. So lemme know what color you want and I can let you know if I have that color.

[chaseruk]

can you do trackball surrounds too?...you know,the little arrows that go around the trackball

[SlammedNiss]

can you do trackball surrounds too?...you know,the little arrows that go around the trackball

I have this design, or if you have something else in mind, pm me a drawing and I can probably replicate it.

[chaseruk]

Thanks for the info....PM sent.

[htjunky]

I was interested in ordering a set of button and joystick decals in white from you.  I can't PM yet because I don't have enough posts.  Should I send you an email to get some?

[PL1]

I can't PM yet because I don't have enough posts.

Welcome aboard, Htjunky.   

Your PM system should be enabled now.   


Scott

[Monstertorch]

Hello slammedniss, I just send you funds via PayPal for two sheets of white button labels. Thank you for offering this service!

[Titchgamer]

I got and fitted my decals from Slammedniss today and I am well chuffed with them.
They only took 10 days to get to me from the US and they are real good quality.
My only regret is not asking him to invert the service and return decals but hindsight is great and ime sure he can sort me them out when I place my next order with him

[yotsuya]

Never heard  "Well chuffed" before. It's always "quite chuffed". But glad you're chuffed, just the same.

[Titchgamer]

Must be a reginal thing lol

[ngalanis24]

Just to be sure, those decals are stickers only with the part you want (1p,2p,coin etc..).
I mean they are not rounded stickers...Is that right?

[Titchgamer]

Correct.

[thomas_surles]

Came out great. Fits 5 letters in these buttons.

[ngalanis24]

Great job again from Slammedniss.
And fast delivery.

[Gavros83]

Order placed for white decal button stickers at the paypal address slammendiss@gmail.com hope i did this right look forward to receiving my purchase to complete my project

[SlammedNiss]

Order placed for white decal button stickers at the paypal address slammedniss@gmail.com hope i did this right look forward to receiving my purchase to complete my project

PM sent.

[bbshift6]

Joined the board just recently so don't yet have PM capabilities. I would like to order a set of black button stickers. Is it best to just paypal you the $ and go from there?

[PL1]

Welcome aboard, Bbshift6.   

Joined the board just recently so don't yet have PM capabilities.

Your PMs should be enabled now.


Scott

[bbshift6]

Welcome aboard, Bbshift6.   

Joined the board just recently so don't yet have PM capabilities.

Your PMs should be enabled now.


Scott

Thanks!

[bbshift6]

Just wanted say thanks, I received the decals today and they will work out perfect!

Thanks!

[odiefish]

I will be ordering two black sheets. Wondering if I can have an extra Exit and Coin in place of Turbo and Tab. If not that is fine. Let me know if I didnt paypal the correct amount.

[Hockeyboy]

Just wanted to give a huge thanks -- not only did he get my decals sets out to me quick, he even adjusted the print size so I could fit the words onto a standard button. Many thanks for being so prompt and willing to work with me.

[lunatik4444]

good day all,

All of my buttons are white and will have led's in the future.  would most recommend black stickers for best visibility?  also, when i'm ready to purchase, would it be best if i just paypal the monies with a note as to what i want?  I don't have enough posts to PM.  thanks in advance!!

Rich

[SlammedNiss]

you can actually contact me directly via my email. That's usually the best way to get ahold of me. It's located in the OP.

[Keithril]

Do you still do the button and joystick decals ? I wo
uld like to order them in white and do you deliver to Ireland

[SlammedNiss]

Do you still do the button and joystick decals ? I wo
uld like to order them in white and do you deliver to Ireland

Responded via your email.

[Devinthadude81]

Hi,
I just signed up here. I'm also interested in purchasing some if the white decal stickers. Please let me know where to send payment to. Thanks!

[SlammedNiss]

Hi,
I just signed up here. I'm also interested in purchasing some if the white decal stickers. Please let me know where to send payment to. Thanks!

All purchasing info such as prices and payment info can be found in the OP on page 1. You can also shoot me an email directly at slammedniss @ gmail dot com.

[Devinthadude81]

Hi,
I just signed up here. I'm also interested in purchasing some if the white decal stickers. Please let me know where to send payment to. Thanks!

All purchasing info such as prices and payment info can be found in the OP on page 1. You can also shoot me an email directly at slammedniss @ gmail dot com.

Ok, thanks. Just sent you payment for a set of white button labels. Thanks!

[pingu08]

Got all my decal yesterday and ready to install them now !!!


super service with update on the progress!!!!

Thanks again

[Danreedsguitar]

Hi there just joined looking for a price to post to U.K. please I'm looking for the black set ,thanks

[JudgeRob]

SlammedNiss is a solid guy and really good at what he does.  He printed the stickers for my tokens and they are far exceeding my expectations.   



http://forum.arcadecontrols.com/index.php/topic,149265.80.html

[SlammedNiss]

Hi there just joined looking for a price to post to U.K. please I'm looking for the black set ,thanks

1 set of black button decals is $14 shipped to the UK.

[yonashi]

Can the moderator please allow me to send PMs? I can't reply to SlammedNiss with my address regarding an order for button labels (I'm a new member).

Thank you!

[SlammedNiss]

Can the moderator please allow me to send PMs? I can't reply to SlammedNiss with my address regarding an order for button labels (I'm a new member).

Thank you!

Got it and sent them out yesterday. Thank you for your purchase!

[SlammedNiss]

Building a cab for Christmas? Be sure and get your button label decals ordered so you receive them on time!

[thepro8]

payment just sent. let me know if you need any other info from me.

[BeardedMacDog]

I just registered so I don't think I can PM but would very much like 1 set of standard decals. I'm in Texas. Should I email you?

[PL1]

I just registered so I don't think I can PM but would very much like 1 set of standard decals. I'm in Texas. Should I email you?

Welcome aboard, BeardedMacDog.   

Your PMs should be enabled now.


Scott

[BeardedMacDog]

Thank you!

[Batsugame]

Just joined up for this service and would like very much to order a set of white labels for my black buttons, but can't PM. Can I just send a payment with the necessary info? Thank you!

[PL1]

can't PM.

Your PMs should be enabled now.   


Scott

[bmamo]

Hi, do you do international shipping to the EU for these? Also do you have different designs I can look at?

[nekreg9]

Hi Moderators, please enable PMs for me. Thanks!

[SlammedNiss]

Hi, do you do international shipping to the EU for these? Also do you have different designs I can look at?

I do ship internationally all the time. If you can find something you like that I don't have I can usually replicate it.

[SlammedNiss]

Been a while since I've posted in this thread, and I've received a few emails asking if I'm still making button decals. So, just thought I'd make a post saying yes, I am still making them.

Here's a pic of a delicious looking pepperoni pizza to catch your eye.



 

[jkwon00]

Order Placed.  Thanks for doing this.  These are near impossible to find.

[SlammedNiss]

Order Placed.  Thanks for doing this.  These are near impossible to find.

I haven't received any orders today. Did you already send payment?

[avandeputte]

I am new to the whole arcade world,  but I am building a 2-player arcade with 8 buttons for each player. 

Not completely sure what the best button scheme is,  but it seems the common button layouts have the following button/letters:   Y, X, L, B, A, R, Start, Select ?   

Do you offer a set with simple black letters.   If so,  I am interested to order 2 sets.

Thank you!

[chipdale53]

Worked with Niss on a custom idea for a cabinet for my son. Received the set in the mail this week. Just wanted to say, Excellent work! Thank you for keeping this service alive.
My wife and kids are super excited to be able to push 1up mushrooms instead of COIN.

[SlammedNiss]

Worked with Niss on a custom idea for a cabinet for my son. Received the set in the mail this week. Just wanted to say, Excellent work! Thank you for keeping this service alive.
My wife and kids are super excited to be able to push 1up mushrooms instead of COIN.

Thank you for the kind words. Be sure to post up pics once your project with your son is finished!

[omega]

Hi, I'm interested in buying a set of vinyl button decals, but I'm not able to PM yet.

[JDFan]

Hi, I'm interested in buying a set of vinyl button decals, but I'm not able to PM yet.

For new accounts it just takes a few posts to be able to send pm's so just post a few replies in a couple threads and you'll be able to pm him ( IIRC it is less then 5 replies so really not many - they just have it in place to avoid spam bots from signing up and then sending everyone PMs ! )

[pryced35]

Would like to place an order and discuss some custom buttons but I'm not able to PM yet

[PL1]

Would like to place an order and discuss some custom buttons but I'm not able to PM yet

Your PMs should be enabled now that you're a Jr. Member.   


Scott

[pryced35]

Would like to place an order and discuss some custom buttons but I'm not able to PM yet

Your PMs should be enabled now that you're a Jr. Member.   


Scott

Thank you