Author Topic: Vinyl Button Decals (Read 220824 times)

SlammedNiss · « **on:** February 15, 2013, 09:44:06 pm »

Button label sets are $14 for a single set, or 2 for $22. Prices include USPS 1st Class shipping within the USA. (International orders add $2)
These sets are available only in either WHITE or BLACK on cut vinyl. (not printed on clear circles)

I do not allow decal substitutions.

These decals are sized to fit standard Happ 0.8125" buttons.

Acceptable payment methods:
1. PayPal. Payment via "gifting" is always appreciated but never required.
2. Amazon gift card.

hyper x · « **Reply #1 on:** February 22, 2013, 02:29:09 am »

Hi,

Just joined for this. Finally getting around to making an arcade pedestal from a nba jam TE control panel for mame instead of using my wii classic controllers for a more authenticate feel. Really like this idea since I already have the buttons and don't want to re buy transparent ones for no good reason.

Any way you can make them like this:

Basically red, blue, green and yellow for the p1 - p4 and for the 25 cents. Everything else can be white. I will pay extra if this is a possibility. Just let me know. Thanks.

Mike

Endprodukt · « **Reply #2 on:** February 22, 2013, 04:32:51 am »

How much for shipping to Germany?

Malenko · « **Reply #3 on:** February 22, 2013, 01:12:33 pm »

how much for a galaga bezel thingie?

chopperthedog · « **Reply #4 on:** February 22, 2013, 01:49:10 pm »

Pm'd edited defender kick plate files. Hope you can make it happen.

good day.

SlammedNiss · « **Reply #5 on:** February 22, 2013, 05:14:53 pm »

Quote from: hyper x on February 22, 2013, 02:29:09 am

Hi,

Just joined for this. Finally getting around to making an arcade pedestal from a nba jam TE control panel for mame instead of using my wii classic controllers for a more authenticate feel. Really like this idea since I already have the buttons and don't want to re buy transparent ones for new good reason.

Any way you can make them like this:

<removed image>

Basically red, blue, green and yellow for the p1 - p4 and for the 25 cents. Everything else can be white. I will pay extra if this is a possibility. Just let me know. Thanks.

Mike

yes, can easily change up colors for an additional fee.

Quote from: Endprodukt on February 22, 2013, 04:32:51 am

How much for shipping to Germany?

please PM me your shipping zipcode/postal code and I will get you an estimate.

Quote from: Malenko on February 22, 2013, 01:12:33 pm

how much for a galaga bezel thingie?

Monitor bezel?

Quote from: chopperthedog on February 22, 2013, 01:49:10 pm

Pm'd edited defender kick plate files. Hope you can make it happen.

Will be responding to your PM shortly.

hyper x · « **Reply #6 on:** February 23, 2013, 02:19:22 am »

email sent regarding color change on the 8 icons being done like in the jpeg in post 2. Thanks again.

Mike

Malenko · « **Reply #7 on:** February 23, 2013, 08:05:16 am »

yeah the monitor bezel, not sure what other kind of bezel there is, especially on Galaga

SlammedNiss · « **Reply #8 on:** February 23, 2013, 04:42:46 pm »

Quote from: hyper x on February 23, 2013, 02:19:22 am

email sent regarding color change on the 8 icons being done like in the jpeg in post 2. Thanks again.

Mike

Never received email

Quote from: Malenko on February 23, 2013, 08:05:16 am

yeah the monitor bezel, not sure what other kind of bezel there is, especially on Galaga

ok, just wanted to make sure that bezel wasn't interchanged with something else. As far as the bezel goes, I don't have a vector, only a large jpeg I found online. If you look closely, you will see imperfections that show up from the original scan.

THIS guy made a vector, but I highly doubt he'll just give it away.

fudgeyall · « **Reply #9 on:** February 24, 2013, 02:24:23 am »

Didn't see you had a dedicated thread. I'm not able to send you a PM for some reason, could you send me a message? I want to purchase a set.

Le Chuck · « **Reply #10 on:** February 24, 2013, 10:31:53 am »

This is a pretty clean galaga bezel PNG, haven't tried printing it at full size but it should work

SlammedNiss · « **Reply #11 on:** February 24, 2013, 04:15:32 pm »

Quote from: Le Chuck on February 24, 2013, 10:31:53 am

This is a pretty clean galaga bezel PNG, haven't tried printing it at full size but it should work

That looks much better than what I was able to find. Lemme know the overall dimensions and I'll shoot you a price.

hyper x · « **Reply #12 on:** February 25, 2013, 01:08:49 pm »

pm sent instead and I linked pongos old sticky thread to your new thread incase anymore people post there instead of here. Thanks again.

Mike

HaRuMaN · « **Reply #13 on:** February 25, 2013, 02:01:19 pm »

Made this a sticky.

hyper x · « **Reply #14 on:** February 26, 2013, 12:30:15 am »

Paypal'ed sent. Thanks again.

Mike

SlammedNiss · « **Reply #15 on:** February 26, 2013, 02:15:24 am »

Just wanted to drop a quick note. I currently am out of white sets ATM, and don't know when I will make it down to my shop. We just got hammered with snow again tonight on top of what we already had last week. I'm paraplegic and it's difficult to leave the house with even just a couple inches on the ground. If you need black, blue, or red, I currently have a couple sets of each on hand. Otherwise, will probably be early next week before I can produce more. I'll make more than enough this next time and keep an abundance of white on hand.

Thx for understanding.

SlammedNiss · « **Reply #16 on:** March 01, 2013, 11:51:09 pm »

Plenty of white sets back in stock. Also, as of tomorrow (3/2/13) everything should be sent out. So, if you ordered from me you should already have it or have it within a few days.

Would love to hear some feedback.

jwalther420 · « **Reply #17 on:** March 04, 2013, 11:39:07 am »

Just sent you a paypal order for a set of black decals. Thanks so much for doing this!

--Justin

DrumAnBass · « **Reply #18 on:** March 05, 2013, 12:23:11 pm »

Just sent an order for a set of white button decals, thanks!

chopperthedog · « **Reply #19 on:** March 05, 2013, 04:37:09 pm »

Received my package with the 2 color vinyl art....

Love it. Thanks for accepting the challenge SlammedNiss!!!!

good day.

SlammedNiss · « **Reply #20 on:** March 05, 2013, 07:38:11 pm »

Wow, that was quick. Glad you like it!

Also, DrumAnBass, yours will mail out tomorrow. All other orders have been sent.

fudgeyall · « **Reply #21 on:** March 06, 2013, 05:23:35 pm »

No pictures, but I did receive my black set and they look great. Thanks!

DrumAnBass · « **Reply #22 on:** March 09, 2013, 08:10:23 pm »

The labels arrived today, they look great! Thanks a ton!

jwalther420 · « **Reply #23 on:** March 10, 2013, 09:35:13 am »

Received my set of black button graphics - great quality and they got here in just a couple of days. Thanks a ton!

chemikalguy · « **Reply #24 on:** March 11, 2013, 04:57:00 pm »

PM Sent

zabrin · « **Reply #25 on:** March 11, 2013, 06:05:54 pm »

Received my black set.. They look great and got here real quick!!! Thanks again!!!

Z.

hyper x · « **Reply #26 on:** March 13, 2013, 02:53:06 pm »

Got them on Monday. Sorry for the late reply. They came out great and can't wait to get them on my buttons. I'll have pictures up prob in two weeks when I finish up on my 4 player control panel. Thanks again for doing to the extra colors goes great with my color player theme. Just picked up green and yellow n64 controllers to go with my red and blue I had when the system launched to keep the theme lol.

Mike

Dekieon · « **Reply #27 on:** March 15, 2013, 06:55:27 am »

is this sticky vinyl that you stick to the top of keys? Wouldn't they rub off?

SlammedNiss · « **Reply #28 on:** March 15, 2013, 03:29:18 pm »

Yes, this is colored vinyl with a sticky bottom. Should stay on the buttons, depending on how hard you mash the buttons.

Also, I am leaving for vacation next week, so any orders placed AFTER Wednesday 20th won't ship until AFTER April 2nd.

Thx!

Ambaratur · « **Reply #29 on:** March 18, 2013, 07:16:37 pm »

I received my set. I was very happy with the shipping time and the quality of the product. One problem though, I thought these were designed to fit on standard arcade buttons. The "exit" one fit fine, but "pause" is far too long to fit on the button. In my case I ended up using the pause symbol - two vertical lines. I am not as happy with this as not all users of my system understand that symbol.

It would be good to let people know that not all the included images will fit on standard buttons.

SlammedNiss · « **Reply #30 on:** March 18, 2013, 08:17:42 pm »

My sizes were based upon pongo's original design. I can try and recut them smaller, but I'm already close to my machine's capabilities at less than 1/4" tall.

A PM would have been more appropriate to resolve this, don't you think?

Patrickbutler · « **Reply #31 on:** March 19, 2013, 06:32:15 am »

Quote from: SlammedNiss on February 15, 2013, 09:44:06 pm

I have the following sets available for purchase. I currently have white, blue, red, and black for purchase. Other colors available, just let me know what you want and I'll see if I have it in stock. Each set is $12 shipped, or 2 for $20.

Payment can be made to Paypal via slammedniss at gmail dot com.

I also have the ability to do cut vinyl and car parts digitally printed/laminated decals up to 54" wide. Example below is a monitor bezel decal I did for a friend's DK upright. Please let me know what you're looking for.

Looks pretty nice. I can pay you through paypal so are they still available or not?

Ambaratur · « **Reply #32 on:** March 19, 2013, 03:23:26 pm »

Quote from: SlammedNiss on March 18, 2013, 08:17:42 pm

My sizes were based upon pongo's original design. I can try and recut them smaller, but I'm already close to my machine's capabilities at less than 1/4" tall.

A PM would have been more appropriate to resolve this, don't you think?

Nothing to be resolved.

I complimented you on your fast shipping and the quality of the product. Letting your potential customers know that some of the labels don't fit on a standard arcade button is a good idea and I don't think I did anything wrong by making that information public. I would have liked to have known that before my order - it was my incorrect understanding that these were labels designed to be placed right on the buttons.

I am glad that you provide these items and I feel you are doing a great service to those who use these forums.

Endprodukt · « **Reply #33 on:** March 19, 2013, 04:25:46 pm »

Same "problem" here. Couldn't fit the pause. Very good quality though, still would have been good to know before ordering.

SlammedNiss · « **Reply #34 on:** March 19, 2013, 06:50:39 pm »

Well, I will see what I can do about getting them to fit. As of now, I'm not shipping anymore orders until I get back from my cruise. Not leaving until Saturday, but no time ATM to take on new orders.

Dekieon · « **Reply #35 on:** March 29, 2013, 11:59:10 pm »

I am in needing of getting a couple things cut in adhesive vinyl. Not button decals though, what I want is two small designs roughtly 2"x2", two in white and a second design similar in size, again two of them in yellow. Would you be able to cut these? I live in Canada, do you ship to Canada, what would the cost be?

Edit: Also when designing, does the art need to be reversed before being sent to you? I wouldn't want to get it back and find out that the adhesive is on the wrong side of the design.

SlammedNiss · « **Reply #36 on:** April 01, 2013, 03:13:28 am »

Quote from: Dekieon on March 29, 2013, 11:59:10 pm

I am in needing of getting a couple things cut in adhesive vinyl. Not button decals though, what I want is two small designs roughtly 2"x2", two in white and a second design similar in size, again two of them in yellow. Would you be able to cut these? I live in Canada, do you ship to Canada, what would the cost be?

Edit: Also when designing, does the art need to be reversed before being sent to you? I wouldn't want to get it back and find out that the adhesive is on the wrong side of the design.

shipping to canada usually doesn't run more than a couple dollars. Are you placing the decal underneath the substrate or on top? If you want it underneath, it would need reversed cut. On top, normal cut. Feel free to email me the design and I will take a look at it. I am just getting back from vacation so it will take me a few days to catch up with all PM's/emails.

Dekieon · « **Reply #37 on:** April 01, 2013, 04:58:41 pm »

Quote from: SlammedNiss on April 01, 2013, 03:13:28 am

Quote from: Dekieon on March 29, 2013, 11:59:10 pm
I am in needing of getting a couple things cut in adhesive vinyl. Not button decals though, what I want is two small designs roughtly 2"x2", two in white and a second design similar in size, again two of them in yellow. Would you be able to cut these? I live in Canada, do you ship to Canada, what would the cost be?

Edit: Also when designing, does the art need to be reversed before being sent to you? I wouldn't want to get it back and find out that the adhesive is on the wrong side of the design.

shipping to canada usually doesn't run more than a couple dollars. Are you placing the decal underneath the substrate or on top? If you want it underneath, it would need reversed cut. On top, normal cut. Feel free to email me the design and I will take a look at it. I am just getting back from vacation so it will take me a few days to catch up with all PM's/emails.

It would be just placed on side of the cab so I am guessing that would be a normal cut. I will wait to send the email, as I am waiting for a part to come in that I need to get measurements from to finalize the one images size.

I assume .ai format is fine?

wp34 · « **Reply #38 on:** April 01, 2013, 05:26:36 pm »

Payment sent for white vinyl set.

SlammedNiss · « **Reply #39 on:** April 02, 2013, 02:32:25 am »

Quote from: Dekieon on April 01, 2013, 04:58:41 pm

It would be just placed on side of the cab so I am guessing that would be a normal cut. I will wait to send the email, as I am waiting for a part to come in that I need to get measurements from to finalize the one images size.

I assume .ai format is fine?

yes, .ai, .eps, or .pdf is fine, as long as its vectored.

Quote from: wp34 on April 01, 2013, 05:26:36 pm

Payment sent for white vinyl set.

Will send them out on Wed.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news