Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: DoDon Arcade Bartop  (Read 19555 times)

0 Members and 1 Guest are viewing this topic.

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
DoDon Arcade Bartop
« on: September 16, 2010, 02:34:43 am »
Hi All,

Since i sold my old mame cabinet because i need to move to a smaller apartment i just cannot let go of the hobby.
Now my electronic skills are up to date , but i am not so at cutting out wood...  :cry: my local woodshop agreed to help me out.

My plan is to use a 15 inch tft for the screen it will be a two player setup with 6 buttons each....

Can anyone help me out with some plans in measured in centimeters? this will be hopefully the only help i need the rest should be good to go.

I also plan to use an intel atom board with ION graphics ship and a sata hard drive, this should be small enough to fit the bartop.


Thanks again !  :applaud:

*edit* I got the wee-cade plans but not all the measurments are there my woodshop requires all the precise measurments for them to cut out the wood.. :D


« Last Edit: November 11, 2011, 02:59:43 am by njay »
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: New Project - Bartop / Help Needed !
« Reply #1 on: September 16, 2010, 04:29:07 pm »
Alright i send the weecade plans to some woodshops if they can do it..
Should be a breeze for the experts, the assambly i can do with all the rest ofcourse..

 :applaud:

Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: New Project - Bartop / Help Needed !
« Reply #2 on: September 20, 2010, 08:58:08 am »
What a fail... stupid woodshops , we can't cut such corners or bends... pfff

Turncades won't ship outside the UK ... and shipping from emdkay is like 250 dollars ... no go ..

If anyone has another idea to get a Bartop kit let me know   :notworthy:
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

wonderalex

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 120
Re: New Project - Bartop / Help Needed !
« Reply #3 on: September 20, 2010, 10:36:15 am »
Assuming you are in North America, try this:

http://forum.arcadecontrols.com/index.php?topic=98248.0

My first Bartop (see pic here: http://forum.arcadecontrols.com/index.php?topic=104923.msg1115650#msg1115650) came from Peter on a whim (I was bored one winter week-end) now I'm hooked.

I live in Canada so shipping was reasonable - you'll have to contact him about shipping.

Be seeing you,

WonderAlex

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: New Project - Bartop / Help Needed !
« Reply #4 on: September 20, 2010, 02:44:18 pm »
Thanks but i live in the netherlands... so shipping from there waaay to expensive
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

wonderalex

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 120
Re: New Project - Bartop / Help Needed !
« Reply #5 on: September 20, 2010, 09:59:33 pm »
Er - yah - that could be a problem.  :-[

Sorry.

But I did have a thought - instead of going to local build/wood shops look for a cabinet maker. There are many cabinet makers around here making replicas and custom furniture - I'm sure the same is true in the Netherlands.   They would be more likely to make those "strange" curved cuts that wood shops are afraid to do (I encountered the same thing here - if it's not straight they won't do it). Prices would be reasonable because you're only asking them to cut the wood not assemble & finish the cabinet.

OR re-design the wee-cade using straight cuts. Like a mini tempest cabinet or those old coleco micro-arcades from the 80's (see below) or some other straight-edged cab.

Then again I might be complicating stuff - try the cabinet makers before going for the re-design.

Be seeing you,

WonderAlex


njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: New Project - Bartop / Help Needed !
« Reply #6 on: September 21, 2010, 03:12:14 am »
Thanks for the reply alex !

But i arranged a bare wood kit from supplier it will be in november deliverd because they are very busy now..

But the go ahead is there wohoo  :applaud:
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: New Project - Bartop / Help Needed !
« Reply #7 on: September 21, 2010, 05:51:19 am »
Hi,

Anyone got experience with Asus AT5NM10-I (Retail, Gb-LAN, VGA, Sound, Mini-ITX)

It has an onboard intel graphics chip my aim for the bartop is MAME with KI2 as most heavy Rom to play.
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

Pitman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 28
Re: New Project - Bartop / Help Needed !
« Reply #8 on: September 21, 2010, 09:03:32 am »
i got the dm510 atom for my build

I was going to do a little test of some roms later actually, so i'll remember kinst2
« Last Edit: September 21, 2010, 09:06:20 am by Pitman »

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: New Project - Bartop / Help Needed !
« Reply #9 on: September 21, 2010, 09:13:45 am »
Thanks for the help pitman !
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: New Project - Bartop / Help Needed !
« Reply #10 on: September 21, 2010, 02:10:22 pm »
Here is my pc setup:

Mini itx based:

2 GB DDR2-800 (2048 MB)

160 GB SATA (160 GB)

ION ITX-G Synergy Edition (NVIDIA ION)
 
ANP-355A12 (355 Watt)


Still wondering how the hell im going to fit that supply in there....
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: New Project - Bartop / Help Needed !
« Reply #11 on: September 22, 2010, 12:46:49 pm »
Hmm so somebody else with the atom proc claims Ki2 is not running well.. only difference this board has an ION card on it and i have 1 gb more memory...  :afro:
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

WhereEaglesDare

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1536
  • Shut Off All The Compactors on the Detention Level
    • My HomePage
Re: New Project - Bartop / Help Needed !
« Reply #12 on: September 22, 2010, 11:00:03 pm »
Hmm so somebody else with the atom proc claims Ki2 is not running well.. only difference this board has an ION card on it and i have 1 gb more memory...  :afro:

I am using the Dual Atom 1.6 330 and the ION adapter with 3GB RAM on my ASUS 1201N and KI2 doesnt run well.  Team Fortress 2 and Left 4 Dead run well, Fall out3 is totally playable...

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: New Project - Bartop / Help Needed !
« Reply #13 on: September 23, 2010, 02:37:42 am »
Alright thanks... then it back to the drawing board
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

cy4life

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Re: New Project - Bartop / Help Needed !
« Reply #14 on: September 23, 2010, 06:12:17 pm »
Have you started laying out a control panel?  I'm wondering how big the controller panel would be and how other people like 2players on a bartop.  I am planning on building one myself soon and am still debating if I want to stick with one player or squeeze in two.

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: New Project - Bartop
« Reply #15 on: August 29, 2011, 04:40:25 am »
Hi All,

I am finally on the building stages of this project :)

I finished my visual pinball cabinet finally so it's time for the next :)

I am going to use the weecade plans for this build and my father inlaw is helping me with the wood work :)

Here is the hardware i just ordered:

I already own an Ion board for my htpc setup and mame and heavier roms like KI2 runs just fine :)  :cheers:

Product:

IONITX-P-E (NVIDIA ION) GLIVN1


Aantal:

1


Totaalprijs:

177,90*

---------------------------------


Product:

4 GB DDR3-1066 (4096 MB) ICIF22



Aantal:

1



Totaalprijs:

19,99*

---------------------------------


Product:

750 GB SATA2 (750 GB) AEBQV3



Aantal:

1

Totaalprijs:

34,99*

---------------------------------


Product:

Pure Power BQT L7 350W (350 Watt) TN3V24



Aantal:

1

Totaalprijs:

39,99*
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: New Project - Bartop / Help Needed !
« Reply #16 on: August 29, 2011, 04:55:36 am »
Alright my next order done:

CBCL01BLA Classic Pushbuttons from Happ Controls.
Color: Black

6

CBCL01RED Classic Pushbuttons from Happ Controls.
Color: Red

 6

PIPAC2+LPS2 I-PAC 2 Interface.
Cable Type: PS/2 Cable
 1

CJJB01RED J-Stik Ball-Top Red
 2

CAPFEET PCB Mounting Feet
 2

CBCL02ST2 Start Logo Pushbuttons Black.
Logo: Start2
1

CBCL02ST1 Start Logo Pushbuttons Black.
Logo: Start 1
1
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

Martijn

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 802
  • Akira!
    • ModMyBox
Re: New Project - Bartop / Help Needed !
« Reply #17 on: August 29, 2011, 08:37:59 am »
Good luck with this one, plan ahead with wiring this time ;) You live very near me btw, i am from Veenendaal.

Ill come and spend some kwartjes on your flipper cab  ;D

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: New Project - Bartop / Help Needed !
« Reply #18 on: August 29, 2011, 10:33:25 am »
You are more then welcome :)
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Project Bartop X
« Reply #19 on: August 30, 2011, 06:01:17 am »
Waiting for parts...

also ordered orange happ coin reject button for coin eem accept in mame   :notworthy:
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: Project Bartop X
« Reply #20 on: August 31, 2011, 04:38:54 pm »
ultimarc parts underway  :applaud:
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: Project Bartop X
« Reply #21 on: September 01, 2011, 04:37:01 am »
they could not deliver my zotac board i ordered, so they got me this:

ZOTAC IONITX-T-E

This has a better atom proc. and a video chip without shared memory ...
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: Project Bartop X - Artist needed !
« Reply #22 on: September 02, 2011, 09:01:39 am »
Hi,

I need an artist who can make me a customer side art, customer marquee and a custom CPO.

The cpo layout will be standard 2 player 2 sticks 6 buttons each on a straight row.
I will use the weecade plans so an additional 3 buttons go on the front bottom

I want it to be a mix of 1944 the loop masters and ki2 or to more easy between shmups and fighters

willing to pay ofcourse :)
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: Project Bartop X - Artist needed !
« Reply #23 on: September 03, 2011, 04:17:25 am »
Artist hired , snaake will do some awesome work i am sure :)
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: Project Bartop X - PC building stage
« Reply #24 on: September 04, 2011, 05:53:03 pm »
The heart of the project:



Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: Project Bartop X - PC building stage
« Reply #25 on: September 05, 2011, 02:49:02 am »
Got some Ultimarc parts in today:





Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: Project Bartop X - PC building stage
« Reply #26 on: September 05, 2011, 09:54:41 am »
Got around to finishing the W7 installation.

Got hyperspin setup with mame and some roms , video's are converting to flv right now.

Taito Type X SFIV tested runs ok

Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

Martijn

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 802
  • Akira!
    • ModMyBox
Re: Project Bartop X - PC building stage
« Reply #27 on: September 05, 2011, 10:13:47 am »
Good to see the hardware is running, do you have movies for all roms? I deleted everything what i had from emumovies.com

Maybe you can help me out ;)

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: Project Bartop X - PC building stage
« Reply #28 on: September 05, 2011, 10:33:22 am »
Yup i think i have around 5.000 movies for mame only that is ... or 3000 hmmm :) so if you need em :)  , i can't setup an ftp server to much work here ..
but we can make an exchange or you can visit with an external HD :)

here are some screens of the taito type x running:

Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

Martijn

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 802
  • Akira!
    • ModMyBox
Re: Project Bartop X - PC building stage
« Reply #29 on: September 05, 2011, 10:47:18 am »
I could use, mame, snes and megadrive movies :P or screenhots, i have a ftp server running and 120mbit ziggo

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: Project Bartop X - PC building stage
« Reply #30 on: September 05, 2011, 11:30:21 am »
PM me plz

i will upload them tonight :)

but they are in avi you must convert them to flv
but ihave a good free tool to do that

the avi's are on my bartop pc that has no internet ...
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: Project Bartop X - PC building stage
« Reply #31 on: September 06, 2011, 02:48:03 am »
More goodies coming my way:

2x 10 watts speakers
1x coin switch
1x power connector to connect 220 mains in the back of the cabinet :)
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: Project Bartop X - PC building stage
« Reply #32 on: September 06, 2011, 10:08:47 am »
i need some help,

i am running ki2 and ki on this system and i got the sound stutter issue
i am running a lesser zotac board downstairs on my htpc and that runs fine ...

i am using mame 0.132u

any ideas?
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: Project Bartop X - PC building stage
« Reply #33 on: September 09, 2011, 11:17:58 am »
Got some mini wiring done today :)







Got KI2 with u64emu running through HS thanks to djvj and chillinwater for their help

Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

dandare

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 226
Re: Project Bartop X - PC building stage
« Reply #34 on: September 09, 2011, 12:40:07 pm »
Nice.

I love those itx mobos.  wish i'd used one in my bartop.

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: Project Bartop X - PC building stage
« Reply #35 on: September 12, 2011, 09:41:33 am »
Software part is nearly complete , soon build time !:

Mame:





Neo Geo:



Taito Type X:

Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: Project Bartop X - PC building stage
« Reply #36 on: September 14, 2011, 09:00:29 am »
Got some more parts in today:




Since i got better speakers i destroyed my cheap ass pc speaker set for the sound amp:



Tadaaa :

Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: Project Bartop X - PC building stage
« Reply #37 on: September 14, 2011, 10:54:59 am »
Still the best setup i think for a 2 player bartop :)

i know it's crooked but i wanted to test some setups out on an old box :)

Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: Project Bartop X - PC building stage
« Reply #38 on: September 29, 2011, 04:33:45 am »
Artwork is steadly coming along..

Snaake  has done the following:

The final work will have orchid removed and but on the left side and fulgore will remain on the right side but the colors will stay the same:

Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

njay

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • To Nudge or Not to Nudge !
Re: Project Bartop X - Construction 22-10-2011
« Reply #39 on: October 03, 2011, 02:27:37 am »
Assembly date 22-10-2011 :)
Mini Pinball Project [Finished]:
http://forum.arcadecontrols.com/index.php?topic=98826.0

Cab Convert To HyperSpin [Sold due to Move]
http://forum.arcadecontrols.com/index.php?topic=101535.0

New Project - Bartop [Planning Stage]
http://forum.arcadecontrols.com/index.php?topic=105894

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31