Author Topic: WG K4951 video connector, need help (Read 2065 times)

bluezdragon · « **on:** November 21, 2002, 12:13:58 am »

I got this WG K4951 monitor from a guy near my city. I'm kinda new to the Arcade monitor so please bear with me. The video part has 6pins and 3 pins. I'm try to find the connector to connect to these pins. where would i find these connector? i understant that i have to strip the wire of this connector and twist them with vga connector. Also there is a wire with a connector at end with 2 holes that said a isolation transformer is required. I saw a isolation transformer at hapcontrol, but i don't know which power supplies i should get or do i need a power supply? I really want to get this monitor to work.

Thank guys

BlueZ

Thenasty · « **Reply #1 on:** November 25, 2002, 07:11:13 pm »

yes you do need the ISOLATION transformer.
Here is a link for the MONITOR MANUAL.
http://www.mikesarcade.com/arcade/manuals/monitor/WG-4901.pdf

Ken Layton · « **Reply #2 on:** October 28, 2003, 11:21:19 am »

Yup, definitely need an isolation transformer! Happ Controls and Wells-Gardner sell the video cable.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: WG K4951 video connector, need help (Read 2065 times)

bluezdragon

WG K4951 video connector, need help

Thenasty

Re:WG K4951 video connector, need help

Ken Layton

Re:WG K4951 video connector, need help