Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Sitting a Sound Card in DOS...help  (Read 1326 times)

0 Members and 1 Guest are viewing this topic.

ahmer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 234
  • Last login:March 16, 2014, 02:40:21 pm
  • Do as you like.
    • IC Markets Rebates and Discount
Sitting a Sound Card in DOS...help
« on: February 21, 2005, 04:48:00 pm »
I attached a Creative Labs PCI 128 VIBRA sound card and also install its dos drivers reqired.
I am using arcadeos and dmame9.0.After running arcadeos there was a
starting sound,menu sound,Run game sound and also Exit ArcadeOs sound but there was no sound in game...any help...

Please check some of these DOS settings and tell me if i am missing something...

Logged

ROM: Spaceknight

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18
  • Last login:September 04, 2008, 09:54:21 pm
  • I'm a girl gamer!
Re: Sitting a Sound Card in DOS...help
« Reply #1 on: February 21, 2005, 04:53:13 pm »
Change soundcard=1 and try again.
Logged

ahmer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 234
  • Last login:March 16, 2014, 02:40:21 pm
  • Do as you like.
    • IC Markets Rebates and Discount
Re: Sitting a Sound Card in DOS...help
« Reply #2 on: February 21, 2005, 05:11:17 pm »
i already do this in both mame.cfg and arcadeos.cfg
Logged

Thenasty

  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4420
  • Last login:Today at 04:19:14 pm
    • Thenasty's Arcademania Horizontal/Vertical monitor setup.
Re: Sitting a Sound Card in DOS...help
« Reply #3 on: February 21, 2005, 07:57:24 pm »
Quote from: ahmer on February 21, 2005, 05:11:17 pm
i already do this in both mame.cfg and arcadeos.cfg

I suggest elimiting AOS first. Just use Dmame and make sure the sounds works there, then worry about the other one.
Logged
Thenasty's Arcademania Horizontal/Vertical setup.
http://forum.arcadecontrols.com/index.php?topic=26696.0

Free VGA Breakout Cable
http://forum.arcadecontrols.com/index.php?topic=38228.0

Ultimate All in One Coin Mech write up (Make your own)
http://forum.arcadecontrols.com/index.php?topic=19200.0

Chris

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4574
  • Last login:September 21, 2019, 04:59:49 pm
    • Chris's MAME Cabinet
Re: Sitting a Sound Card in DOS...help
« Reply #4 on: February 22, 2005, 04:00:56 pm »
The Creative Labs PCI cards are awful in DOS.  You might have better luck with a different card.
Logged
--Chris
DOSCab/WinCab Jukebox: http://www.dwjukebox.com

Bloinkxp

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 251
  • Last login:August 30, 2020, 11:20:28 am
Re: Sitting a Sound Card in DOS...help
« Reply #5 on: February 22, 2005, 04:38:20 pm »
What kind of motherboard do you have?  Verify that the IRQ and DMA are free in the bios before you allocate them.  You might need to turn off Pnp OS and configure the IRQs yourself.

Good luck
Logged
Nothing witty here...move along.

Chris

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4574
  • Last login:September 21, 2019, 04:59:49 pm
    • Chris's MAME Cabinet
Re: Sitting a Sound Card in DOS...help
« Reply #6 on: February 22, 2005, 05:28:24 pm »
The PCI 128 Vibra is emulating a "real" SoundBlaster in software, so all of the settings need to be "just right".

--Chris
Logged
--Chris
DOSCab/WinCab Jukebox: http://www.dwjukebox.com

ahmer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 234
  • Last login:March 16, 2014, 02:40:21 pm
  • Do as you like.
    • IC Markets Rebates and Discount
Re: Sitting a Sound Card in DOS...help
« Reply #7 on: February 22, 2005, 05:30:54 pm »
Quote from: Chris on February 22, 2005, 04:00:56 pm
The Creative Labs PCI cards are awful in DOS.  You might have better luck with a different card.

I am not agree with you here.
http://easymamecab.mameworld.net/html/snddosdr.htm


Bloinkxp,I will check out those in the Bios,while it was a GFXL mother board.
Logged

ahmer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 234
  • Last login:March 16, 2014, 02:40:21 pm
  • Do as you like.
    • IC Markets Rebates and Discount
Re: Sitting a Sound Card in DOS...help
« Reply #8 on: February 22, 2005, 05:34:53 pm »
Quote from: Chris on February 22, 2005, 05:28:24 pm
The PCI 128 Vibra is emulating a "real" SoundBlaster in software, so all of the settings need to be "just right".

--Chris

i will check it again.
what about other Creative PCI cards.? i mean favourite,easy to setup in dos.
Logged
Pages: [1]
  
Go Up
« previous next »