Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Wells Gardner Model 25K7191 VGA Cable  (Read 2010 times)

0 Members and 1 Guest are viewing this topic.

aj8302

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38
  • Last login:April 02, 2020, 08:48:34 pm
  • I want to build my own arcade controls!
Wells Gardner Model 25K7191 VGA Cable
« on: April 08, 2016, 04:14:36 pm »
I have an arcade that came with a WG 25K7191 Monitor and I want to make a VGA cable for it so that I can plug it in to my computer using Soft15khz. The pins on it are just like the ones in the picture. My question is what pins do I need to wire to the VGA plug? I keep finding different ways of doing it. Any help would be appreciated thank you.



Thenasty

  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4419
  • Last login:Yesterday at 11:50:31 am
    • Thenasty's Arcademania Horizontal/Vertical monitor setup.
Re: Wells Gardner Model 25K7191 VGA Cable
« Reply #1 on: April 14, 2016, 09:48:52 am »
Thenasty's Arcademania Horizontal/Vertical setup.
http://forum.arcadecontrols.com/index.php?topic=26696.0

Free VGA Breakout Cable
http://forum.arcadecontrols.com/index.php?topic=38228.0

Ultimate All in One Coin Mech write up (Make your own)
http://forum.arcadecontrols.com/index.php?topic=19200.0