Author Topic: S.A.M. - Stand Alone MAME (Read 35162 times)

PL1 · « **Reply #80 on:** September 25, 2013, 08:28:56 pm »

Good thing that Mikey's not facing front.

P2 joystick would be . . . well, you get the idea.

Scott

Rick · « **Reply #81 on:** September 27, 2013, 06:40:34 pm »

Quote from: PL1 on September 25, 2013, 08:28:56 pm

Good thing that Mikey's not facing front. P2 joystick would be . . . well, you get the idea.

"Hey, Mikey! How's it hangin'?!"

"Umm, to the right!"

Would not be lying.

CoryBee · « **Reply #82 on:** September 27, 2013, 08:13:30 pm »

Quote from: Rick on September 27, 2013, 06:40:34 pm

Quote from: PL1 on September 25, 2013, 08:28:56 pm
Good thing that Mikey's not facing front. P2 joystick would be . . . well, you get the idea.

"Hey, Mikey! How's it hangin'?!"

"Umm, to the right!"

Would not be lying.

You really have a "hard on" for making innuendos over here. Too bad you aren't dealing with your own "wood" in the CNC Bartop thread.......OOOOOooOOoOOO

Rick · « **Reply #83 on:** September 27, 2013, 08:22:55 pm »

Quote from: CoryBee on September 27, 2013, 08:13:30 pm

You really have a "hard on" for making innuendos over here. Too bad you aren't dealing with your own "wood" in the CNC Bartop thread...

Don't worry. My Wife handles that work. And ... "innuendo". LOL.

yotsuya · « **Reply #84 on:** September 27, 2013, 09:46:51 pm »

It's like a 70s BBC comedy up in here.

Rick · « **Reply #85 on:** September 27, 2013, 10:00:02 pm »

Quote from: yotsuya on September 27, 2013, 09:46:51 pm

It's like a 70s BBC comedy up in here.

Dude. I'm Canadian. We're all "King of Kensington" up in this ---smurfette---.

CoryBee · « **Reply #86 on:** September 27, 2013, 10:34:44 pm »

Quote from: yotsuya on September 27, 2013, 09:46:51 pm

It's like a 70s BBC comedy up in here.

Rick · « **Reply #87 on:** September 27, 2013, 10:42:15 pm »

Quote from: yotsuya on September 27, 2013, 09:46:51 pm

It's like a 70s BBC comedy up in here.

CoryBee · « **Reply #88 on:** September 29, 2013, 07:52:21 am »

Gotta show some turtle (yea i know the placement of the joystick is iffy but it isn't noticeable unless you are a perv like Rick

)

Can't forget sleepy Yoshi

Rick · « **Reply #89 on:** September 29, 2013, 07:54:54 am »

Quote from: CoryBee on September 29, 2013, 07:52:21 am

Is it just me, or are the rounded edges ... not so rounded? Was this deliberate?

CoryBee · « **Reply #90 on:** September 29, 2013, 08:45:15 am »

You are correct good sir. And no it was not deliberate. Not sure why that happened. I traced the Slag coin template with a circle thingy in Photoshop then did the stroke thing and I don't know how it has the not so rounded effect when you look closely. It isn't noticeable from a distance but it would be nice to fix that.

It is the same thing on all of my art unfortunately, but the white sticks out the most. The others are fine.

Rick · « **Reply #91 on:** September 29, 2013, 09:34:47 am »

Quote from: CoryBee on September 29, 2013, 08:45:15 am

It isn't noticeable from a distance but it would be nice to fix that. It is the same thing on all of my art unfortunately, but the white sticks out the most.

While you're fixing that, you can fix that whole "A"/"&" thing too.

PL1 · « **Reply #92 on:** September 29, 2013, 11:16:27 am »

Quote from: CoryBee on September 29, 2013, 07:52:21 am

Gotta show some turtle (yea i know the placement of the joystick is iffy but it isn't noticeable unless you are a perv like Rick )

Great -- Now I'm a perv for warning about iffy joystick placement.

Scott

Martijn · « **Reply #93 on:** September 29, 2013, 01:53:12 pm »

Did you do stroke and outerglow with normal settings? because using outerglow will result in those not round shapes.

best you make a 300 dpi image, create the first dot, then copy the whole thing and past it
then stroke it again and copy the whole image , that will give round borders

Monkeyvoodoo · « **Reply #94 on:** September 29, 2013, 04:25:20 pm »

Did you expand your selection circle from the slag coin template? If you expand too far from the original the circle loses it's roundness.

If you make a selection circle and then place snapable guidelines to give you center points, you should be able to create a smooth circle selection at the size you want.

CoryBee · « **Reply #95 on:** September 30, 2013, 11:58:11 am »

Quote from: Martijn on September 29, 2013, 01:53:12 pm

Did you do stroke and outerglow with normal settings? because using outerglow will result in those not round shapes.

I just did the "stroke", no glow. hmmm.....

Quote from: Monkeyvoodoo on September 29, 2013, 04:25:20 pm

Did you expand your selection circle from the slag coin template? If you expand too far from the original the circle loses it's roundness.

Did not mess with the circle besides moving it around.

This doesn't seem to be a big issue, I will mess around with it more but as for now I wont be doing any more builds for a while. Trying to knock out the ones I have going on before I make myself feel insignificant for not completing something I started.

CoryBee · « **Reply #96 on:** September 30, 2013, 12:03:37 pm »

Marquee retained

Turned out pretty good and was a pretty simple solution

A view from the underside for the hell of it

Just finished the painting the last coat, not much left to do once it is dried. Just assemble and software

(oh and solder a couple things like the power button and external USB port)

CoryBee · « **Reply #97 on:** October 02, 2013, 09:13:57 am »

SAM is complete. I have been playing this thing on the big screen and I absolutely love it. Will have some pictures of it being played soon.

I had a couple of small issues I had to deal with. Worst of it was after I put together the control panel and started assembling everything I noticed I could not move player one's joystick very much because it was pressed against the laptop hard drive!!

I had to remove all buttons, basically strip down the CP back to bare wood. I then recessed the joysticks enough to barely miss the hard drive this time. All is well now though and S.A.M. is just waiting for a custom MALA theme. Turn the thing on and it kicks into the frontend with a ton of games and console systems. Definitely taking it with me to the UK, might even try selling it there for a bit of cash before my trip back.

yotsuya · « **Reply #98 on:** October 02, 2013, 10:26:14 am »

Looks great!

Nephasth · « **Reply #99 on:** October 02, 2013, 11:02:08 am »

Nice job Cory! ...But it reminds me of this:

Rick · « **Reply #100 on:** October 02, 2013, 12:10:50 pm »

OMG, sorry. I couldn't resist.

yotsuya · « **Reply #101 on:** October 02, 2013, 12:30:08 pm »

I think it's time we stage an intervention for you, Rick.

PL1 · « **Reply #102 on:** October 02, 2013, 12:35:29 pm »

Quote from: yotsuya on October 02, 2013, 12:30:08 pm

I think it's time we stage an intervention for you, Rick.

Who can take care of the Gimp while Rick's in rehab?

Scott

Rick · « **Reply #103 on:** October 02, 2013, 12:36:26 pm »

Quote from: yotsuya on October 02, 2013, 12:30:08 pm

I think it's time we stage an intervention for you, Rick.

I'm sorry, but acronyms always bring out the worst in me.

CoryBee · « **Reply #104 on:** October 02, 2013, 07:26:17 pm »

Quote from: yotsuya on October 02, 2013, 10:26:14 am

Looks great!

And rick......

matt4949 · « **Reply #105 on:** October 02, 2013, 07:37:29 pm »

And rick......

[/quote]

That is why I always wear an undershirt that says "Hi Chris Hanson, Look Mom I'm on TV!" When I go to meet my interweb dates.

CoryBee · « **Reply #106 on:** October 02, 2013, 09:55:18 pm »

The boot screen

CoryBee · « **Reply #107 on:** October 02, 2013, 09:55:57 pm »

Not sure if I should do a blue and white themed Mala layout or just leave it to the one I have been using lately. Hmmm.....

Monkeyvoodoo · « **Reply #108 on:** October 02, 2013, 09:59:19 pm »

What about staying with the blue and white but reversing the colours? Blue on white?

CoryBee · « **Reply #109 on:** October 03, 2013, 06:11:56 am »

Quote from: Monkeyvoodoo on October 02, 2013, 09:59:19 pm

What about staying with the blue and white but reversing the colours? Blue on white?

I like this idea. Will play with it a bit.

Brian74 · « **Reply #110 on:** October 03, 2013, 02:38:49 pm »

There is a lot of stroking going on in this thread lol

Sent from my SGH-M919 using Tapatalk 2

yotsuya · « **Reply #111 on:** October 03, 2013, 02:39:36 pm »

Quote from: Brian74 on October 03, 2013, 02:38:49 pm

There is a lot of stroking going on in this thread lol

Sent from my SGH-M919 using Tapatalk 2

THIS thread?

Nephasth · « **Reply #112 on:** October 03, 2013, 02:44:04 pm »

Quote from: yotsuya on October 03, 2013, 02:39:36 pm

Quote from: Brian74 on October 03, 2013, 02:38:49 pm
There is a lot of stroking going on in this thread lol

Sent from my SGH-M919 using Tapatalk 2

THIS thread?

CoryBee · « **Reply #113 on:** October 03, 2013, 02:53:45 pm »

What is wrong with a bit of stroking?

rablack97 · « **Reply #114 on:** October 03, 2013, 04:03:33 pm »

i just saw that guy on a VINES marathon......

CoryBee · « **Reply #115 on:** October 03, 2013, 04:17:07 pm »

Quote from: rablack97 on October 03, 2013, 04:03:33 pm

i just saw that guy on a VINES marathon......

HAHAHAHA, ---smurfin--- vines

lcmgadgets · « **Reply #116 on:** October 07, 2013, 09:54:33 am »

Nice build Corybee.

CoryBee · « **Reply #117 on:** October 07, 2013, 10:30:45 am »

Quote from: lcmgadgets on October 07, 2013, 09:54:33 am

Nice build Corybee.

Thanks man, quite a lot of fun playing this thing in front of the big screen. We will see if the brits will be as interested as I am in this thing.

Glad I got it completed cause I have 3 more project to complete in 6 days......

1 full size
1 half size
1 bartop

All in final stages, give or take......

a1pharm · « **Reply #118 on:** October 07, 2013, 12:34:07 pm »

Quote from: CoryBee on October 07, 2013, 10:30:45 am

Quote from: lcmgadgets on October 07, 2013, 09:54:33 am
Nice build Corybee.

Thanks man, quite a lot of fun playing this thing in front of the big screen. We will see if the brits will be as interested as I am in this thing.

Glad I got it completed cause I have 3 more project to complete in 6 days......

1 full size
1 half size
1 bartop

All in final stages, give or take......

I wonder how productive you'll be when your blue crystal runs out...

CoryBee · « **Reply #119 on:** October 07, 2013, 02:58:42 pm »

WHO TOLD YOU MY SECRETS!

Rick! Get back to the basement and get to work!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: S.A.M. - Stand Alone MAME (Read 35162 times)

Nephasth

Nephasth