crt still has a faint glow when off

[adidas1984x]

Ok I dont know so i am going to ask . I recently changed the picture tube on my arcade cabinet monitor. It works perfectly the chassis is a u2000. But after I turn the cabinet off the crt has a dim and very faint glow to it on the whole screen then goes away after about 20 secs. Is something I have done wrong is this a problem? The horizontal and verticle ohms are almost identical to the original tube. I only replaced the tube because it is old and weak. (no problem with glowing from the original tube.)

[Drnick]

I am fairly sure this will be normal. some Crt's glow for longer then others but pretty much all tubes will do it. See the following.

http://www.repairfaq.org/sam/crtfaq.htm#crtagl

[ed12]

no thats a very normal thing
most ppl just do not see it
rember it is a crt,and it heats up
nothing to fret about

ed

[Monkeyvoodoo]

Should just be residual phosphor glow. I had a TV a few years ago that had a faint afterglow but you had to have the room dark to notice it.