Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Keeping Monitor On  (Read 1516 times)

0 Members and 1 Guest are viewing this topic.

Ophelius

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 80
  • Last login:January 30, 2018, 08:15:42 pm
Keeping Monitor On
« on: February 15, 2012, 12:56:26 am »
For all of you who use a regular lcd screen in your cabinets, the ones you find at Best buy and Future shop, how do you deal with turning on your monitors? The arcade monitors turn on when powered, but any other lcd monitor you have to push the on button. If the monitor is hidden inside the cabinet, how does it turn on? Is there a way to make it turn on/off automatically when the power goes on and off? Before I go and buy one I'd like to know if this is possible. Thanks
Logged

slug54

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 225
  • Last login:June 12, 2014, 09:00:21 pm
  • Man, I hope this cab fits through the door way!
    • Arcade Extreme
Re: Keeping Monitor On
« Reply #1 on: February 17, 2012, 07:42:22 pm »
I use  a Dell 19" LCD and it comes on automatically when power is applied.
I plug everything into a smart strip and wire the PC power button to an arcade button mounted on the top of the cab abd it will power on or off everthing in the cabinet.
Logged

Ophelius

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 80
  • Last login:January 30, 2018, 08:15:42 pm
Re: Keeping Monitor On
« Reply #2 on: February 17, 2012, 08:05:04 pm »
Quote from: slug54 on February 17, 2012, 07:42:22 pm
I use  a Dell 19" LCD and it comes on automatically when power is applied.
I plug everything into a smart strip and wire the PC power button to an arcade button mounted on the top of the cab abd it will power on or off everthing in the cabinet.

Ok, that makes sense. Did you have to configure anything in the bios or windows so the other components turn on/off with the pc's power, or does the power bar do that automatically?
Logged

slug54

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 225
  • Last login:June 12, 2014, 09:00:21 pm
  • Man, I hope this cab fits through the door way!
    • Arcade Extreme
Re: Keeping Monitor On
« Reply #3 on: February 18, 2012, 06:44:08 am »
No BIOS configuration was needed. When the PC is powered on or off   the smart strip turns on the other outlets on or off so the marquee light, monitor, and sound system all turn on or off as needed.
The first smart strip I got from walmart that alot of people recomended did not switch properly for me so I had to return it.
I think the standby current of the old PC I am using was too high so it always kept the whole strip turned on.
I ended up finding one at a garage sale that had an adjustment screw that allows the sensitivity to be adjusted.
Logged

Ophelius

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 80
  • Last login:January 30, 2018, 08:15:42 pm
Re: Keeping Monitor On
« Reply #4 on: February 18, 2012, 02:04:52 pm »
Thank you very much, I will look into getting one  :cheers:
Logged

Thenasty

  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4420
  • Last login:Yesterday at 06:59:31 pm
    • Thenasty's Arcademania Horizontal/Vertical monitor setup.
Re: Keeping Monitor On
« Reply #5 on: February 19, 2012, 09:04:12 pm »
ACER LCD's that I have been using, when it's on and UNPLUG then plug again, it stays on.
Logged
Thenasty's Arcademania Horizontal/Vertical setup.
http://forum.arcadecontrols.com/index.php?topic=26696.0

Free VGA Breakout Cable
http://forum.arcadecontrols.com/index.php?topic=38228.0

Ultimate All in One Coin Mech write up (Make your own)
http://forum.arcadecontrols.com/index.php?topic=19200.0

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re: Keeping Monitor On
« Reply #6 on: February 20, 2012, 01:09:56 am »
All the LCDs that I use in my cabinets turn back on if the power is removed and restored.  No special setting are needed.
Logged
Pages: [1]
  
Go Up
« previous next »