Author Topic: WIP Street fighter cab started :D (Read 46566 times)

Nephasth · « **Reply #40 on:** January 28, 2011, 01:15:13 pm »

Quote from: jahilton2002 on January 28, 2011, 01:08:42 pm

thinking about i could put the buttons on the bottom of the monitor bezal if that makes sense

Not a bad idea.

jahilton2002 · « **Reply #41 on:** January 28, 2011, 01:18:06 pm »

Donkbaca · « **Reply #42 on:** January 28, 2011, 01:33:58 pm »

I think the buttons in the middle of the CP would look better if they were on the bezel.

Are you sure you want 8 buttons? From my experience, console games play better with control pads then joysticks. But whatever works best for you!

jahilton2002 · « **Reply #43 on:** January 28, 2011, 01:50:50 pm »

well thx for the opinions guys, gonna look into the bezel buttons

Nephasth · « **Reply #44 on:** January 28, 2011, 01:59:11 pm »

How do you like those wheels on your cab? I had an Atari DigDug with similiar wheels. I hated them, it always felt like it was going to get away from me when I was moving it.

opt2not · « **Reply #45 on:** January 28, 2011, 02:12:49 pm »

Nice clean looking build. Your Uncle's craftsmanship is superb!

Quote from: jahilton2002 on January 28, 2011, 01:06:40 pm

my family will use it alot and i want them to be able to use the functions with having to "ask" how to use it.

I'm assuming you mean, "without having to ask how to use it".
This is why it's vital for a more simple CP. The less buttons, the less intimidating it'll look, the less need to figure out what does what.

I personally don't like having mame function buttons. IMO it takes away from the arcade experience. Things like Pause (pausing an arcade game??), Back, Enter, a dedicated button for hyper-spinning? But hey, some people like that granularity of control, and there is no mistake this clearly is a Mame cabinet.

I'd go with the bezel mounting for these buttons if you're going to keep 'em. The cleaner the CP space, the better.
Many folks have gone this route, Kman mounted his to his bezel:

Then of course there's Pixelhugger's fine work:

thecig · « **Reply #46 on:** January 29, 2011, 09:21:59 am »

I really like the look of this cab, like you I was inspired to make my own by seeing Martijn's awesome SF cab.

I'm fairly useless with tools, even tho my dad's a builder and would have all the required tools.

So instead a mate of a mate is giving me his old cabinet that is just sitting in his garage FOR FREE! Can't wait.

I am very keen to see how u do the art for this cab tho, to see if i can steal some ideas

Good luck, can't wait for more updates.

jahilton2002 · « **Reply #47 on:** January 29, 2011, 10:06:22 am »

artwork is done mate......... check my first post for the link

thecig · « **Reply #48 on:** January 29, 2011, 11:18:24 pm »

**facepalm**

Can't wait to see how u do the menu buttons on the bezel, i think i'll be doing the same.

jahilton2002 · « **Reply #49 on:** January 30, 2011, 05:39:42 pm »

Made more progress tonight, thought i'd take some pics of some of the "ATTENTION TO DETAIL" of the cab,

CP gonna get cut next along with the marquee, then its time to attack the monitor

back of the cab with both doors now fitted. note curved top edge;

CP box test fitted with pics of the beveald cable holes;

Pics of inside of the cab, mainly of the inside of the doors.

jahilton2002 · « **Reply #50 on:** January 31, 2011, 05:10:35 pm »

more updates comments welcome.

locks to keep little fingers out... and some vents that might be painted black;

jahilton2002 · « **Reply #51 on:** February 04, 2011, 05:23:58 pm »

pics of exhaust fan outlet on top (120mm)

CP

plz keep the comments coming

jahilton2002 · « **Reply #52 on:** February 06, 2011, 04:30:24 pm »

Got screenage!

comments plz good or construtive

Nephasth · « **Reply #53 on:** February 06, 2011, 06:18:04 pm »

Going with scart on this one?

jahilton2002 · « **Reply #54 on:** February 07, 2011, 01:05:38 pm »

yeah vga to scart

jahilton2002 · « **Reply #55 on:** February 08, 2011, 05:12:22 pm »

Screen fitted;

base for thr PCB to sit on

plz comment

Nephasth · « **Reply #56 on:** February 08, 2011, 06:50:27 pm »

That looks sharp! I like the shelf/base for the TV's board.

n88n · « **Reply #57 on:** February 11, 2011, 11:57:35 am »

I love Street Fighter Cabs! This one looks to be a great one as well. Keep up the good work.

emphatic · « **Reply #58 on:** February 11, 2011, 01:33:43 pm »

Looks great!

jahilton2002 · « **Reply #59 on:** February 13, 2011, 12:00:08 pm »

jahilton2002 · « **Reply #60 on:** February 13, 2011, 12:01:42 pm »

plz keep the comments coming guys, it means alot.... can't wait to get paint and art work on

Gaston77 · « **Reply #61 on:** February 15, 2011, 12:46:55 pm »

Wow, your cab is looking awesome!
Do you have the plans for this cab since my hands are itching to start project number 2 (my first project was a Neo-Geo cab) and this cab looks SWEEEEET!
How did your uncle make those nice curbs in the woodwork? Truly the hand of a master.
Question; why did you put screws in the bezel(on each corner of the monitor)? Does it serve a purpose or is there another reason that I'm missing?
Because those shiny little bulbs (painted or not) will annoy you when you're hurtling fireballs. Trust me, one of my mistakes.
And I understand the keyboard tray for practical purposes, but I am not a fan of 'em.
Keep em coming and if you have the plans or if you can redirect me to where you got em, I would be grateful!!!

leapinlew · « **Reply #62 on:** February 15, 2011, 04:27:41 pm »

You might want to revisit the marquee area. If your marquee is going to be the entire width of the cab, the marquee retainer wood you have installed will block the light and create a dark spot where your artwork should be lit.

leapinlew · « **Reply #63 on:** February 15, 2011, 04:42:33 pm »

Also, like Nephasth said - where is the T-molding slot? Do you plan on cutting a t-mold slot? It's too late now, but you really should cut a t-mold slot early so if you make a massive mistake, you can recut a side. Also, make sure you don't hit a screw or anything which could cause you to lose control of the router.

Looking good.

jahilton2002 · « **Reply #64 on:** February 16, 2011, 08:14:46 am »

yes it is having t-mould.....i dont understand why you think its too late now? we have lots of room, and the cab is being dismantled to be painted anyway.... the marque perspex is etched at the ends, works kinda like fibre optics.... so no dark spots. The keyboard tray is a must for me...... the FE isn't final yet so still lots to do.....the tray is hidden and will be hard to see once painted. the "bolts" are used to see if the screen looked ok...... a bezel along with perspex is to follow.

thx for you comments keep em coming.

jahilton2002 · « **Reply #65 on:** February 16, 2011, 08:22:25 am »

Quote from: Gaston77 on February 15, 2011, 12:46:55 pm

if you have the plans or if you can redirect me to where you got em, I would be grateful!!!

its based on a dynamo, but didn't work from plans, just pics. after its done i'll take measurements

opt2not · « **Reply #66 on:** February 16, 2011, 11:02:44 am »

Quote from: jahilton2002 on February 16, 2011, 08:14:46 am

yes it is having t-mould.....i dont understand why you think its too late now?

Quote from: leapinlew on February 15, 2011, 04:42:33 pm

It's too late now, but you really should cut a t-mold slot early so if you make a massive mistake, you can recut a side.

jahilton2002 · « **Reply #67 on:** February 16, 2011, 11:51:28 am »

i could recut a side now if i wanted......... you've confused me?

HaRuMaN · « **Reply #68 on:** February 16, 2011, 12:01:45 pm »

Quote from: jahilton2002 on February 16, 2011, 11:51:28 am

i could recut a side now if i wanted......... you've confused me?

There is a chance you can have a mishap while cutting the t-molding slot, thereby ruining your side.

leapinlew · « **Reply #69 on:** February 16, 2011, 12:46:45 pm »

Quote from: jahilton2002 on February 16, 2011, 11:51:28 am

i could recut a side now if i wanted......... you've confused me?

I didn't realize you plan on disassembling for paint. So, even if you screw up a side, or have an issue you should be able to fix it.

However, it just makes sense to slotcut your side before putting any screws in it or anything else. Just ensures you won't have an accident while cutting the slot.

penjuin · « **Reply #70 on:** February 16, 2011, 04:25:22 pm »

how did you get those edges so consistently bevelled? impressive work.

jahilton2002 · « **Reply #71 on:** February 16, 2011, 04:34:50 pm »

thx for the comments guys. sorry, you all confused me LOL. i was having probs get red t-mould in the uk.... so i started the cab thinking i might not be able to get t-mould. thats why theres no t-slots yet.... the edges are done with a router, and alittle toolin'.

thx for the comments.

SNAAKE · « **Reply #72 on:** February 22, 2011, 02:17:23 pm »

why 8 buttons??

looks good either way. cabinet looks just like the old school dynamo.

jahilton2002 · « **Reply #73 on:** March 01, 2011, 02:34:43 pm »

some updates, need to pull my finger out and get some artwork printed now

;

Gatsu · « **Reply #74 on:** March 01, 2011, 03:14:59 pm »

thats very impressive man. Super super clean and neat looking.

Keep up the great work! It's looking d@mn fine.

jmike · « **Reply #75 on:** March 02, 2011, 07:06:01 am »

this thing looks amazing! The attention to detail with every corner/curve really shows your dedication, (I mean even that TV shelf). Can't wait to see what's next.

Take plenty of pics

jahilton2002 · « **Reply #76 on:** March 02, 2011, 07:32:01 am »

comments like this really mean alot..... we're (we being myself and a business partner) are thinking of starting a cab making company here in the uk..... so comments like this really push us to start..... this cab is the first "arcade" cab that hes made. he being the other business partner..... hes a cabinet maker/carpenter by trader. And and you can tell.... his work is second to none! and he amazes me everytime i see him work

thx for the comments

Nephasth · « **Reply #77 on:** March 02, 2011, 09:48:16 am »

Quote from: jahilton2002 on March 02, 2011, 07:32:01 am

comments like this really mean alot..... we're (we being myself and a business partner) are thinking of starting a cab making company here in the uk..... so comments like this really push us to start..... this cab is the first "arcade" cab that hes made. he being the other business partner..... hes a cabinet maker/carpenter by trader. And and you can tell.... his work is second to none! and he amazes me everytime i see him work

thx for the comments

Uncle turned business partner

Your hobby is already starting to affect the lives of those around you. Keep up the good work!

VanillaGorilla · « **Reply #78 on:** March 05, 2011, 12:31:28 pm »

I like many aspects of your cabinet, good work so far!

Yor finishing details are nice with the rounded edges everywhere..

Few things I would reconsider though;

Reduce the amount of overhang on your control panel. The overage has no purpose, and just makes the monitor look smaller. If it was usable surface area, that would be different....

Player 2's button layout should be rotated slightly counter-clockwise, or it may be VERY uncomfortable to play when standing side by side. Since P2 stands slightly right of center, his right hand will have to rotate uncomfortably to the right to compensate for standing off-square, causing a hard bend at the wrist. I figured I'd at least mention this since you haven't drilled anything yet. I understand that symmetry is 'pretty', but with an 8-button layout, you really should reconsider your ergonomics a bit more (especially if you plan on bringing these to market). There is also too much spacing between the buttons. You would need GIANT hands to take advantage of your current layout. You also need to move player 1&2 further apart. It looks like there is only about an inch between P1's buttons and P2's joystick...That will make you sorry.

Have you ever visited slagcoin.com? they have great layout templates there...

jahilton2002 · « **Reply #79 on:** March 05, 2011, 05:31:35 pm »

thx for the comments i'll check the site out, i'v also changed the CP

fiited some CP latches aswell as the bezel, tinted perspex to follow, for people without a good eye.. the control panels shape has changed also;


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news