Hello,
My OS is Win98SE, I received LCD topgun 2 days ago. I don't plug recoil and vibration. I plug topgun and LEDs only.
--------------------
What I did:
1. Install EMSv3.2 driver - topgun don't trace mouse cursor. In hardware manager I see:" the NTKERN.VXD device loader(s) for this device, could not load the device driver. To fix this, click update driver to update the device driver."
2. Remove previous drivers. Install EMSv3.0 driver - topgun don't trace mouse cursor. In hardware manager I see: " the NTKERN.VXD device loader(s) for this device, could not load the device driver. To fix this, click update driver to update the device driver."
For 2 and 3 I manually copy ntkern.vxd to windows\system but it did nothing, still in hardware manager I see: " the NTKERN.VXD device loader(s) for this device, could not load the device driver. To fix this, click update driver to update the device driver."
3. Remove previous drivers. Install GunCon2Driver0.9b5 - topgun trace mouse cursor but after third calibration not trace cursor. And something wrong is with tracing cursor -> see next point (4).
4. Remove previous drivers. Install EMSv1.0 drivers - topgun trace cursor but still is something wrong:
---------------------------
Now problems.
a) (as in point 3 with guncon) in vertical when I move cursor down, distance between cursor and laser point increase and at about 3/4 screen cursor disappear (and stay in right-upper corner), laser pointer is visible still. I prepared picture for it:
b) when I unplug topgun from USB and next plug again no tracing cursor even after calibration. I must restart OS and then it work.
----------------------------
Do you know solution for 'a' and 'b' problems?
Is it can be problem that monitor is 15"?
I tested resolution 800x600 and 1024x768.
des
EDIT
I forgot - horizontaly mouse tracking works fine.