YEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEESSSSSSSSSSSSSSSSSSSSSSSSSSSS!!!!!!!!!!!!!!!
I GOT GREEEN!!! FINNALY!!!!!!!!!!!!!!
What i did to solve the green issue:
My intention where to change ALL the 31X components on the neck board, but i did not have them all, so changed out the parts that i had.
Changed:
R310 (470 ohm)
ZD311 (16V zener)
C311 (330 pf ceramic)
C312 (2.2 nf ceramic)
Now i got my green!
But still the collapse issue - but some new to that you are unable to see at the picture.
When i turn the green drive down - the picture starts to roll from top to bottom? I have not seen that before - but it is only the first time that i have had turned the monitor on for a longer time.
My best guess bid at the moment is that is caused by C513 (10uf 250V) I have read somewhere that it feeds the 25V line and, my 25V at the LA7837 is only 22V.
And I am still waiting for that cap to get here.
Or as GrantSpain says that i might be the la7853 IC (new one orderd)
But F.. nice that I at last got green! now it is "just" to get the picture stop rolling and full screen