Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: U360 in Metal CP w/Under Panel Dust Washer?  (Read 1714 times)

0 Members and 1 Guest are viewing this topic.

Necro

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1031
  • Last login:November 29, 2022, 08:22:22 pm
  • Building a 'Classic' MAME Cab
U360 in Metal CP w/Under Panel Dust Washer?
« on: January 21, 2010, 10:10:35 pm »
So...I've tried searching but not turned anything up.   Am I right in my assumption that I'm going to need some spacers to mount a U360 back a bit from a metal CP to be able to put a dustwasher underneath?  Because it seems like it would otherwise mount flush.

Or am I missing something critical here?
Logged

u_rebelscum

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3633
  • Last login:April 21, 2010, 03:06:26 pm
  • You rebel scum
    • Mame:Analog+
Re: U360 in Metal CP w/Under Panel Dust Washer?
« Reply #1 on: January 22, 2010, 11:58:49 am »
Looks that way to me.  And since 99% of the u360 buyers (total guess) mount on wood panels, having a flush mount makes sense.  Just put spacers slightly more than (+ 1/64" to 1/32") the thickness of the dustwasher.
Logged
Robin
Knowledge is Power

Necro

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1031
  • Last login:November 29, 2022, 08:22:22 pm
  • Building a 'Classic' MAME Cab
Re: U360 in Metal CP w/Under Panel Dust Washer?
« Reply #2 on: January 22, 2010, 02:39:31 pm »
You rock.  Thanks.  Will bring one of my washers to the hardware store and figure out the most appropriate washer/nut size to get.
Logged
Pages: [1]
  
Go Up
« previous next »