Author Topic: Help me please... (Read 2616 times)

Funnel · « **on:** October 28, 2009, 04:33:17 pm »

So guys I have a situation... I have been searching for router bits for the t molding and I have to say I'm $hit out of luck... I've been to Home Depot, Hardware Stores and even the wood workshop in my school and yet no luck. So I was wondering if any of you guys could lend me one I would be willing to pay. Please reply

LLUncoolJ · « **Reply #1 on:** October 28, 2009, 04:38:38 pm »

I think you can buy them online at http://www.t-molding.com/store/home.php?cat=6

Encryptor · « **Reply #2 on:** October 28, 2009, 04:41:26 pm »

Quote from: LLUncoolJ on October 28, 2009, 04:38:38 pm

I think you can buy them online at http://www.t-molding.com/store/home.php?cat=6

That's what I did when I purchased my T-Molding. Where are you located?

Make sure you get the correct size for the T-Molding you're buying. They are not all the same size.

Encryptor

Funnel · « **Reply #3 on:** October 28, 2009, 04:44:44 pm »

I don't have paypal so yeah out of luck too lol... I'm located in Puerto Rico

ammitz · « **Reply #4 on:** October 28, 2009, 05:09:54 pm »

you can buy them from randy t at GGG for 20$

se more here: http://groovygamegear.com/webstore/index.php?main_page=index&cPath=72&zenid=cd6b5658560c68c086afab9e8e40e09e

Funnel · « **Reply #5 on:** October 28, 2009, 05:29:39 pm »

Thing is I've never bought anything online...I bought my buttons and microswitches through a friend who placed my order on ebay.

Ginsu Victim · « **Reply #6 on:** October 28, 2009, 05:35:39 pm »

Then have your friend order from GGG. It's the better deal.

Funnel · « **Reply #7 on:** October 28, 2009, 05:40:20 pm »

do they take paypal?

bkenobi · « **Reply #8 on:** October 28, 2009, 05:50:12 pm »

Stop being lazy and follow the link. You can read all about GGG's policies right on their site.

CheffoJeffo · « **Reply #9 on:** October 28, 2009, 09:10:05 pm »

Will you guys back off of the lad ... he's obviously afraid of hippies !

Funnel · « **Reply #10 on:** October 28, 2009, 09:26:35 pm »

Quote from: CheffoJeffo on October 28, 2009, 09:10:05 pm

Will you guys back off of the lad ... he's obviously afraid of hippies !

Yup

garnerb350 · « **Reply #11 on:** October 29, 2009, 08:33:00 am »

Time to bite the bullet...I buy my stuff on "the Google", its part of that thing you call the Internets...

I went to this site below to order the bit I needed...but during that time...they were on sale...

http://www.rockler.com/product.cfm?page=2119

I gave up on Home Depot a long time ago...When I went around asking them for this and that...they couldnt tell the difference between their finger or their arse...Good luck...

brock.sampson · « **Reply #12 on:** October 29, 2009, 08:44:18 am »

I found mine at my local Lowe's. Had to buy the arbor and blade separate make sure you get the correct size.

bkenobi · « **Reply #13 on:** October 29, 2009, 11:43:18 am »

Quote from: garnerb350 on October 29, 2009, 08:33:00 am

I gave up on Home Depot a long time ago...When I went around asking them for this and that...they couldnt tell the difference between their finger or their arse...Good luck...

Huh?! I would have thought one being an innie and the other an outie would have been a give away.

Turnarcades · « **Reply #14 on:** October 29, 2009, 12:17:03 pm »

Quote from: bkenobi on October 29, 2009, 11:43:18 am

Quote from: garnerb350 on October 29, 2009, 08:33:00 am
I gave up on Home Depot a long time ago...When I went around asking them for this and that...they couldnt tell the difference between their finger or their arse...Good luck...
Huh?! I would have thought one being an innie and the other an outie would have been a give away.

lol. Can't believe people are still afraid of ordering off the internet - all my family come to me for the same reason, and I say "well if you're that untrusting why should I risk it for you?"

garnerb350 · « **Reply #15 on:** October 29, 2009, 12:55:40 pm »

Quote from: Turnarcades on October 29, 2009, 12:17:03 pm

Quote from: bkenobi on October 29, 2009, 11:43:18 am
Quote from: garnerb350 on October 29, 2009, 08:33:00 am
I gave up on Home Depot a long time ago...When I went around asking them for this and that...they couldnt tell the difference between their finger or their arse...Good luck...
Huh?! I would have thought one being an innie and the other an outie would have been a give away.

lol.

I know....I totally agree...I remember i went to the drill bits and routers and asked everybody there..."Do you have slot cutter bits for doing t-molding" and all i got was the Deer in the Headlights look....from 10 different employees...

But then at the same time...you got to ask yourself...depends on what part of the country you live in...
Where as I myself, live in North Carolina...for example...when you think of hotub , you think of this...

Where as in NC, we think of this....

CheffoJeffo · « **Reply #16 on:** October 29, 2009, 01:18:43 pm »

Quote from: Funnel on October 28, 2009, 04:33:17 pm

I was wondering if any of you guys could lend me one I would be willing to pay. Please reply

Quote from: Funnel on October 28, 2009, 04:44:44 pm

I don't have paypal so yeah out of luck too lol... I'm located in Puerto Rico

How are you intending to pay for someone to lend to you ?

ammitz · « **Reply #17 on:** October 29, 2009, 03:57:41 pm »

hi again Funnel

just wondering, where are you going to get the T-molding from?
most places that sell t-molding will also sell the matching router bits.

Hope you will find a solution, the last way out could be without t-molding.

Malenko · « **Reply #18 on:** October 29, 2009, 04:12:36 pm »

cut the wood vertically on a table saw, just adjust the blade depth and use the right thickness blade,

just be careful

Gamester · « **Reply #19 on:** October 29, 2009, 04:32:12 pm »

Quote from: Malenko on October 29, 2009, 04:12:36 pm

cut the wood vertically on a table saw, just adjust the blade depth and use the right thickness blade,

Uhmm... I could maybe see how that could work with a straight cut, but most cabs have angles that would be all but impossible to get to with a table saw...

Ginsu Victim · « **Reply #20 on:** October 29, 2009, 04:39:12 pm »

I was just thinking about the same thing.

drventure · « **Reply #21 on:** October 29, 2009, 05:09:55 pm »

Quote

cut the wood vertically on a table saw, just adjust the blade depth and use the right thickness blade,

That sounds incredibly dangerous to me. Esp doing large panels vertically.

But, hey, not my fingers

Funnel · « **Reply #22 on:** October 29, 2009, 06:15:16 pm »

Quote from: CheffoJeffo on October 29, 2009, 01:18:43 pm

Quote from: Funnel on October 28, 2009, 04:33:17 pm
I was wondering if any of you guys could lend me one I would be willing to pay. Please reply

Quote from: Funnel on October 28, 2009, 04:44:44 pm
I don't have paypal so yeah out of luck too lol... I'm located in Puerto Rico

How are you intending to pay for someone to lend to you ?

Money Order if it ain't a problem

Funnel · « **Reply #23 on:** October 29, 2009, 06:20:05 pm »

Quote from: ammitz on October 29, 2009, 03:57:41 pm

hi again Funnel

just wondering, where are you going to get the T-molding from?
most places that sell t-molding will also sell the matching router bits.

Hope you will find a solution, the last way out could be without t-molding.

Hey! Well since my cab thickness is 5/8 I was going to tell my friend to order it on ebay.
http://cgi.ebay.com/20-FEET-OF-5-8-Smooth-Black-T-Molding_W0QQitemZ120436953655QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item1c0a9a1237

Malenko · « **Reply #24 on:** October 30, 2009, 09:22:33 am »

Quote from: drventure on October 29, 2009, 05:09:55 pm

Quote
cut the wood vertically on a table saw, just adjust the blade depth and use the right thickness blade,

That sounds incredibly dangerous to me. Esp doing large panels vertically.

But, hey, not my fingers

he didnt say what he was cutting. its how I did the tmolding grooves in my stand alone controller and how I plan to do them on my lil bar top. Both of my routers are down (and the reason I'll never lend out tool again) so I have to make due with what IS working. Also I use a wood push and or clamp the top to a bigger piece of wood and take other precautions


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news