Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Wire popped out of the Jamma Plug  (Read 1514 times)

0 Members and 1 Guest are viewing this topic.

dieseldogpi

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 82
  • Last login:October 27, 2011, 02:40:41 pm
Wire popped out of the Jamma Plug
« on: September 12, 2009, 04:50:06 pm »
One of the wires came out of the jamma plug.  How the hell do I get it back in there?  Can I just solder it to the right spot on the board or bad idea?
Logged

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 14021
  • Last login:August 18, 2025, 01:56:40 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Wire popped out of the Jamma Plug
« Reply #1 on: September 12, 2009, 05:12:59 pm »
Quote from: dieseldogpi on September 12, 2009, 04:50:06 pm
One of the wires came out of the jamma plug.  How the hell do I get it back in there?  Can I just solder it to the right spot on the board or bad idea?

jam the pin back in?
you can solder it to the board, but that defeats the convenience of a JAMMA adapter
Logged
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

dieseldogpi

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 82
  • Last login:October 27, 2011, 02:40:41 pm
Re: Wire popped out of the Jamma Plug
« Reply #2 on: September 12, 2009, 05:17:19 pm »
the pin itself didn't come out of the plug.  Only the wire popped out of the pin.  I can't seem to get the pin out either to get the wire back in.  Thanks for the help.
Logged

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 14021
  • Last login:August 18, 2025, 01:56:40 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Wire popped out of the Jamma Plug
« Reply #3 on: September 12, 2009, 05:22:29 pm »
can you solder the wire to the pin?
Logged
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

dieseldogpi

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 82
  • Last login:October 27, 2011, 02:40:41 pm
Re: Wire popped out of the Jamma Plug
« Reply #4 on: September 12, 2009, 05:23:36 pm »
no, the pin is recessed in the plug, I cannot figure out how to get it out of there.
Logged

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 14021
  • Last login:August 18, 2025, 01:56:40 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Wire popped out of the Jamma Plug
« Reply #5 on: September 12, 2009, 05:25:14 pm »
strip the wire a little and wedge it between the pin and the plastic; it should be fine as long as you dont rock the machine , heh

I only advise against soldering to the board because it makes swapping games exceedingly difficult
Logged
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

Kevin Mullins

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4504
  • Last login:February 01, 2021, 01:29:34 pm
    • Me on Myspace
Re: Wire popped out of the Jamma Plug
« Reply #6 on: September 12, 2009, 05:39:27 pm »
There is a tab between the pin and the plastic that you need to depress.
They make a special tool for it, but I use a VERY small pin punch to poke in between them.
Unplug the harness and look down through it from the side that plugs in to the board.
Logged
Not a technician . . . . just a DIY'er.

dieseldogpi

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 82
  • Last login:October 27, 2011, 02:40:41 pm
Re: Wire popped out of the Jamma Plug
« Reply #7 on: September 13, 2009, 11:25:39 am »
k, thanks
Logged

RayB

  • I'm not wearing pants! HA!
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11279
  • Last login:August 18, 2025, 10:59:20 pm
  • There's my post
    • RayB.com
Re: Wire popped out of the Jamma Plug
« Reply #8 on: September 13, 2009, 01:48:32 pm »
Use one of those tiny screw drivers for eye glasses, use it to squeeze the pin and push it out.
Logged
NO MORE!!

bkenobi

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1668
  • Last login:August 16, 2021, 10:41:52 pm
Re: Wire popped out of the Jamma Plug
« Reply #9 on: September 13, 2009, 01:55:42 pm »
Those plugs are easy to bend too far (if they are anything like standard DB style ones).  Once you get it out, you may have to bend it back to the right shape.  Be careful not to over do it though as the metal could fatigue and break off.  If that happens, the plug won't stay in place and you will need a new one.
Logged

Ginsu Victim

  • Yeah, owning a MAME cab only leads to owning real ones. MAME just isn't good enough. It's a gateway drug.
  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10092
  • Last login:June 28, 2025, 10:45:55 pm
  • Comanche, OK -- USA
Re: Wire popped out of the Jamma Plug
« Reply #10 on: September 13, 2009, 02:50:13 pm »
Wow.....talk about reading a thread title wrong.....

I saw "Wire popped out of the Jamma Plug" as "Wife pooped out a Jamma Plug"  :lol
Logged

Ummon

  • Trade Count: (+13)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5244
  • Last login:June 09, 2010, 06:37:18 pm
Re: Wire popped out of the Jamma Plug
« Reply #11 on: September 13, 2009, 11:31:35 pm »
Quote from: Ginsu Victim on September 13, 2009, 02:50:13 pm
Wow.....talk about reading a thread title wrong.....

I saw "Wire popped out of the Jamma Plug" as "Wife pooped out a Jamma Plug"  :lol

It happens to the....um, well you know. (Heheheheh.)


I had a tab break off, and thought I tried my small small screwdrivers and anything else without success. I'll try again. Also, notice there are tabs that aren't connected to wires, meaning they're handy replacements.
Logged
Yo. Chocolate.


"Theoretical physics has been the most successful and cost-effective in all of science."

Stephen Hawking


People often confuse expressed observations with complaint, ridicule, or - even worse - self-pity.
Pages: [1]
  
Go Up
« previous next »