Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: wanting to turn a die hard cabinet into a multicade have a question  (Read 951 times)

0 Members and 1 Guest are viewing this topic.

arcade1213

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 34
  • Last login:July 27, 2009, 12:08:27 pm
looking to get a 173-in-1 BabyStar Multigame Horizontal JAMMA PCB and
put it in a die hard cabinet will this work is Sega ST-V (JAMMA)
harness the same as a regular jamma harness or do i need some sort of
adapter,if i do need an adapter where could i get one thanks for your
time

arcade1213

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 34
  • Last login:July 27, 2009, 12:08:27 pm
Re: wanting to turn a die hard cabinet into a multicade have a question
« Reply #1 on: July 11, 2009, 06:33:16 am »
i was thinking that it should work but im not certain if the pinouts are the same on the harnesses

Kevin Mullins

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4504
  • Last login:February 01, 2021, 01:29:34 pm
    • Me on Myspace
Re: wanting to turn a die hard cabinet into a multicade have a question
« Reply #2 on: July 11, 2009, 07:34:22 am »
JAMMA is JAMMA is JAMMA   ;)
Not a technician . . . . just a DIY'er.

arcade1213

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 34
  • Last login:July 27, 2009, 12:08:27 pm
Re: wanting to turn a die hard cabinet into a multicade have a question
« Reply #3 on: July 11, 2009, 10:23:46 am »
awsome thanks for your answer.just a question that i had to ask to be shure