Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: ArcadeVGA + TV + Lightguns  (Read 824 times)

0 Members and 1 Guest are viewing this topic.

freppa

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 24
  • Last login:September 30, 2004, 08:45:31 am
ArcadeVGA + TV + Lightguns
« on: July 03, 2003, 07:36:03 am »
This might be a stupid question, but I have to ask.

From what I can tell you can wire up the ArcadeVGA to a TV using RGB-inputs on the SCART, and the results are supposed to be great.

My question is: If you do this and want to get some Act-Labs lightguns for it, What kind should you get? The PC or the TV-version?

My guess would be the PC-version, but I'm not sure. Anyone running this setup???

/Freppa

brandon

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 817
  • Last login:June 08, 2025, 02:40:01 pm
  • I <3 arcade games.
Re:ArcadeVGA + TV + Lightguns
« Reply #1 on: July 03, 2003, 06:07:06 pm »
I found this on the Act-Labs FAQ for the USB light gun...

Q: Which USB Light Gun will work with my Arcade Monitor?
A: The PC USB Light Gun will work with an Arcade Monitor as long as you have a JPAC Arcade VGA card available from www.ultimarc.com

I dont know anything about SCART TV but since it connects to RGB the same as an arcade monitor then I would assume it would work the same so you would need the PC version.  I guess you could email Act-Labs just to confirm this..


GamingGreg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 304
  • Last login:August 05, 2018, 06:04:30 pm
Re:ArcadeVGA + TV + Lightguns
« Reply #2 on: July 03, 2003, 07:40:27 pm »
I had asked Act-Labs about this very thing and they told me I'd have to use the USB VGA (not TV) version.   If you want to use two guns this would be a problem right now as it only officially supports one gun.  However I have heard you can use two USB VGA guns with the Analog+ version of MAME. (see this thread http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=8512;start=msg65920#msg65920)

Also Act-Labs has said that a dual (two player) version of the VGA gun is scheduled to come out towards the end of this year.