Author Topic: Are ultimarc.com a safe place to buy form? (Read 10922 times)

Rowdy · « **on:** January 06, 2009, 07:02:05 pm »

The time has come to order the good stuff. So I would like to know if this is a safe place to put my money, or is it somewhere else I should buy my Ultrastik?

Dazz · « **Reply #1 on:** January 06, 2009, 07:04:36 pm »

Ultimarc.com is one of the best resellers and Andy is an outstanding member of this community. Ultimarc.com is a very safe place to buy from.

ahofle · « **Reply #2 on:** January 06, 2009, 07:08:29 pm »

http://wiki.arcadecontrols.com/wiki/Ultimarc

others:

http://wiki.arcadecontrols.com/wiki/Vendors

rlemmon · « **Reply #3 on:** January 06, 2009, 07:14:54 pm »

Bought from them more than once, andy is a great guy. They also are very helpfull with e mails if you have a tech problem.

J.Max · « **Reply #4 on:** January 06, 2009, 07:16:37 pm »

Ultimarc might be the single best place to buy parts on the net. GGG and Lizard Lick are right up there too.

lingpanda · « **Reply #5 on:** January 06, 2009, 07:23:49 pm »

A+ for ultimarc.

Rowdy · « **Reply #6 on:** January 06, 2009, 07:33:08 pm »

I guess I got my answer. Now it would be great if that ProtX-crap paymentmethod wouldn't refuse my perfectly good creditcard.

Donkey_Kong · « **Reply #7 on:** January 06, 2009, 08:22:45 pm »

Purchased from them plenty of times, never any problems.

Looks like he accepts global paypal as well. That might work better than the protx.

KDOG · « **Reply #8 on:** January 06, 2009, 08:50:37 pm »

Or you could see if divemaster has what you are looking for he sells Ultimarc state side.

DaveStall · « **Reply #9 on:** January 06, 2009, 10:23:00 pm »

I've ordered from Andy several times with no issues at all (and amazingly fast delivery considering his location). He is a top notch guy as well and very quick to handle any issues you might have during or after the purchase.

Dave

EvilTwin · « **Reply #10 on:** January 06, 2009, 10:35:45 pm »

I'm shopping around for stuff and have been curious too. Thanks for the comments.

Ginsu Victim · « **Reply #11 on:** January 06, 2009, 11:45:53 pm »

Excellent seller and super fast shipping to the US.

mrclean · « **Reply #12 on:** January 06, 2009, 11:46:25 pm »

protokatie · « **Reply #13 on:** January 07, 2009, 12:17:11 am »

I know Andy Warne is a con artist, and I can PROVE it! For one thing, I bought his minipac "keyboard encoder" and found out that not only did it not have a matrix, but it lacked most keys all-together. Hell, you even have to buy special "keys" made by Happ just to make the thing work properly. I already have a keyboard, why would I want a half-assed encoder without any keys? Why send someone 50 bucks for something I could have gotten at walmart for 10, and it even has keys. These damn keyboard encoders are a fraud. I've heard that they have no "ghost keys", but since I don't believe in ghosts I don't care (Like ghosts are gonna jump out of my 10 dollar walmart keyboard, anyways!

) Luckily for Andy, there was a guy by the name of Sir. Sammich Worcestershire-Sauce from Kent UK who discovered that the so-called "keyboard encoders" happen to fit the default keys for something called "Maim", and from what I can tell, Andy is pursuing this angle to increase his sales. Also, I have heard that there is also a similar con-artist operating in the US called Randy T., who is also selling these so-called "keyboard encoders".

It's shame, I tell ya!

(for those who are too daft to tell; I am JOKING!)

Time Pilot · « **Reply #14 on:** January 07, 2009, 12:19:54 am »

Absolutely no question. Ultimarc is fantastic. I've got 4 ultrasticks, an ArcadeVGA card, and the older IPAC and OptiPAC. All top notch stuff. The only problem I had was a defective PCB on one of the UltraSticks. As soon as Andy knew about it, I had a replacement in hand. Can't really get much better.

-TP

bboysnj · « **Reply #15 on:** January 07, 2009, 12:28:21 am »

Can I tease your grammar? "Is" not "Are"

Proto - hysterical response man.

Rowdy -- you cannot go wrong, just as everyone and their brother has pointed out. Andy is an A+ vendor. Wishing you the best of luck, and good times all around with your endeavor man! Post pics if you get a chance!

kagaden · « **Reply #16 on:** January 07, 2009, 12:33:14 am »

Heck yes. Awesome stuff too!

protokatie · « **Reply #17 on:** January 07, 2009, 12:44:18 am »

Quote from: Time Pilot on January 07, 2009, 12:19:54 am

Absolutely no question. Ultimarc is fantastic. I've got 4 ultrasticks, an ArcadeVGA card, and the older IPAC and OptiPAC. All top notch stuff. The only problem I had was a defective PCB on one of the UltraSticks. As soon as Andy knew about it, I had a replacement in hand. Can't really get much better.

-TP

Andy is awesome with his customers. When people have asked on the forum about Ultimarc I would always answer in a brutally honest manner. I Praised the quality of his product and how quickly I got it. But since he forgot to include the ultimarc CD-rom with my order, I posted that as well. After a few times of posting my opinion of his services on BYOAC, he replied (not like he reads every post, of course) and said that if I wanted to have him ship the disc, he would. I told him not to bother, since someone pointed me to the page on his site for me to DL it.
The only problem I have with Andy's site is that his product line has grown/changed more than his web site's organization system has. It took me more than a month of casual surfing of his site before I happened upon the minipac (a product that should be one of his premier "front page" items). So, basically my only problem with Ultimarc is that the site makes it harder than I would like to actually shop for his stuff. (May sound like a minor complaint, but if I ended up with an Ipac instead of a minipac, I would have been like "WTF!!!")

thatitalian · « **Reply #18 on:** January 07, 2009, 04:29:19 am »

Quote from: KDOG on January 06, 2009, 08:50:37 pm

Or you could see if divemaster has what you are looking for he sells Ultimarc state side.

I second that! Andy is a GREAT guy but so is DM! Look for divemaster127 or look here:

http://forum.arcadecontrols.com/index.php?action=profile;u=7532

I bought a shed load from him and he ALWAYS delivers! Top guy!

Franco B · « **Reply #19 on:** January 07, 2009, 04:52:05 am »

You can't fault Ultimarcs customer service.

I bought a IPAC4 a couple of years ago and I managed to fry it with my n00bish wiring to druins interface. Andy told me to send it out to him and he fixed it for me free of charge and sent it back at his own cost. Most other companies would tell you to go jump.

CathalDublin · « **Reply #20 on:** January 07, 2009, 08:10:18 am »

Bought a few things from him now at this stage and all have been excellent items with super speed shipping.
Also his customer support is extreamly quick too

HaRuMaN · « **Reply #21 on:** January 07, 2009, 08:27:48 am »

It always amazes me how fast Andy ships stuff from the UK to the US. I placed an order once and got it in a couple of days...

Bender · « **Reply #22 on:** January 07, 2009, 09:20:59 am »

Great Products, Great Service PERIOD!

plus Shipping from the UK to east coast at least is incredibly fast I get stuff from him faster than stuff I order from the mid-west!

andy p · « **Reply #23 on:** January 07, 2009, 06:47:44 pm »

Quote from: Dazz on January 06, 2009, 07:04:36 pm

Ultimarc.com is one of the best resellers and Andy is an outstanding member of this community. Ultimarc.com is a very safe place to buy from.

What he said.

Todd H · « **Reply #24 on:** January 07, 2009, 07:05:40 pm »

Agreed. Andy's one of the best. Highly recommended.

captainpotato · « **Reply #25 on:** January 08, 2009, 07:25:08 am »

Another positive comment from me - I got my order in Australia under three days after I ordered it. Sure, it was missing a few things (nobody's perfect), but Andy sent the missing bits just as quickly and without any questions asked. I know where I'll buy from again.

severdhed · « **Reply #26 on:** January 08, 2009, 08:54:42 am »

While i have not purchased anything directly from Ultimarc, i can vouch for their service. I bought two U360 sticks from another vendor here on the forums, and one of them was damaged when i got it yesterday, then i managed to destroy it even more by trying to install a restrictor plate and twisted off two of the shafts. One quick email to Andy, and he is sending out replacement parts. unbelieveable!!! this is a company that stands behind their product better than any other company i have ever dealt with...you cannot go wrong with ultimarc.

Todd H · « **Reply #27 on:** January 08, 2009, 01:26:40 pm »

Yep, if anything goes wrong with one of his products Andy will take care of you. Heck, I just dropped $150 at Ultimarc's online store yesterday.

Turnarcades · « **Reply #28 on:** January 08, 2009, 09:48:34 pm »

I'm a builder, and I go to Ultimarc for all of my parts. It's not as cheap as ordering in bulk (or even as cheap as some when ordering individually), but the part quality is excellent and customer service fantastic. I wouldn't choose any other parts for our machines.

BASS! · « **Reply #29 on:** January 09, 2009, 05:45:43 am »

+1 for ultimarc lizzardlick GGG and divemaster. You can not go wrong with any of the vendors featured on this site.

slasherman · « **Reply #30 on:** January 09, 2009, 09:48:59 am »

Yes it's safe and the service is impeccable

Blanka · « **Reply #31 on:** January 09, 2009, 09:57:14 am »

Wow, how many credits are we gonna shove up Andy's bottom until Rowdy is convinced

?

(+_+) · « **Reply #32 on:** January 09, 2009, 10:30:53 am »

I'd be worried more about it being too safe. Andy's great period.

krutknut · « **Reply #33 on:** January 09, 2009, 01:24:09 pm »

Safest place on the Net. Andy should open a bank.

protokatie · « **Reply #34 on:** January 09, 2009, 11:22:07 pm »

Quote from: krutknut on January 09, 2009, 01:24:09 pm

Safest place on the Net. Andy should open a bank.

Even the best are corruptible. If he did that, we would all be wondering what happened to our money while Andy was sitting back on a tropical private beach sipping on $300 Mai-Ti's.

_JMFR · « **Reply #35 on:** January 09, 2009, 11:44:09 pm »

its good to hear all of this positive feedback....im fixing to dump a couple hundred on some mame stuff

Ginsu Victim · « **Reply #36 on:** January 10, 2009, 12:20:34 am »

Quote from: _JMFR on January 09, 2009, 11:44:09 pm

its good to hear all of this positive feedback....im fixing to dump a couple hundred on some mame stuff

Only "a couple hundred'?

I might as well not ruin the surprise...

You'll find out soon enough, I guess...

protokatie · « **Reply #37 on:** January 10, 2009, 02:31:08 am »

Quote from: Ginsu Victim on January 10, 2009, 12:20:34 am

Quote from: _JMFR on January 09, 2009, 11:44:09 pm
its good to hear all of this positive feedback....im fixing to dump a couple hundred on some mame stuff

Only "a couple hundred'?

I might as well not ruin the surprise...

You'll find out soon enough, I guess...

Now now, Ginsu: this all starts out in phases. A hundred here, a hundred there. The irony here is that you could buy a decent cab for 400 bucks, but why spend that much money when you can make your own for a mere 2000 bucks? (then that turns into 4000 after you decide to remodel it, then it turns into 10k after you decide that the first one was just a practice run and design a second (aka the "real" first) cab.)

Oh don't forget about when you hear about a cab auction nearby and make sure you have atleast 5 grand on you when you go... (And expect to drop most if not all on it, plus the impromptu Ryder van rental for that cab you just HAD to have but can't fit on the truck you borrowed from your red-neck friend).

Then there is the "The doors aren't wide enough to move my cabs in" phase. This is when you remove the doors, and the door jams. Still not enough space, so you make a garage door that opens directly into your game-room. The Game-room used to be your living room, but since your wife recently left you it is now your game room. (Add 15 grand+ for the fact your wife left you, divorce isn't cheap, but you can't play asteroids on her, so who cares).

In the end, it is still worth it.

shrunkenmaster · « **Reply #38 on:** January 10, 2009, 05:29:06 am »

May as well join in here - I've got a U-Trak, SpinTrak and MiniPAC, all great products and Andy's support is blinding!

dreamakuma · « **Reply #39 on:** January 11, 2009, 04:27:30 am »

Quote from: protokatie on January 10, 2009, 02:31:08 am

Quote from: Ginsu Victim on January 10, 2009, 12:20:34 am
Quote from: _JMFR on January 09, 2009, 11:44:09 pm
its good to hear all of this positive feedback....im fixing to dump a couple hundred on some mame stuff

Only "a couple hundred'?

I might as well not ruin the surprise...

You'll find out soon enough, I guess...

Now now, Ginsu: this all starts out in phases. A hundred here, a hundred there. The irony here is that you could buy a decent cab for 400 bucks, but why spend that much money when you can make your own for a mere 2000 bucks? (then that turns into 4000 after you decide to remodel it, then it turns into 10k after you decide that the first one was just a practice run and design a second (aka the "real" first) cab.)

Oh don't forget about when you hear about a cab auction nearby and make sure you have atleast 5 grand on you when you go... (And expect to drop most if not all on it, plus the impromptu Ryder van rental for that cab you just HAD to have but can't fit on the truck you borrowed from your red-neck friend).

Then there is the "The doors aren't wide enough to move my cabs in" phase. This is when you remove the doors, and the door jams. Still not enough space, so you make a garage door that opens directly into your game-room. The Game-room used to be your living room, but since your wife recently left you it is now your game room. (Add 15 grand+ for the fact your wife left you, divorce isn't cheap, but you can't play asteroids on her, so who cares).

In the end, it is still worth it.

why? my first cab was $300 before artwork. $500 after. and this was a three month project, so about $165 a month. But I'm not Cheap,I'm thrifty.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news