Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: thoughts on how to switch from horizontal to vertical  (Read 1180 times)

0 Members and 1 Guest are viewing this topic.

_JMFR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 81
  • Last login:December 02, 2009, 01:54:50 am
thoughts on how to switch from horizontal to vertical
« on: January 03, 2009, 01:20:31 pm »
as some of you may know, im converting an old horizontal cab into a vertical. im pretty sure all i hafta do is make a new wood frame that the monitor is mounted on to make it work,but im just looking for some more advice...any helps!


« Last Edit: January 03, 2009, 04:48:48 pm by _JMFR »
Logged

CheffoJeffo

  • Cheffo's right! ---saint
  • Wiki Master
  • Trade Count: (+2)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7784
  • Last login:July 14, 2025, 12:11:49 pm
  • Worthless button pusher!
Re: thoughts on how to switch from horizontal to vertical
« Reply #1 on: January 03, 2009, 06:07:19 pm »
If the existing board isn't square enough to fit when rotated, then I would cut a new piece using the existing board as a template (just rotate the board 90 degress when tracing the hole).
Logged
Working: Not Enough
Projects: Too Many
Progress: None

daywane

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2570
  • Last login:December 26, 2024, 11:02:08 am
  • GRRRR!
Re: thoughts on how to switch from horizontal to vertical
« Reply #2 on: January 04, 2009, 10:44:11 pm »
that's what I would do.
I would bet you will have to extend the horizontal sides some.
I have never did this.
the only thing close was a monitor pointing at a mirror.
I removed monitor and mirror and made it vertical
Logged
Pages: [1]
  
Go Up
« previous next »