Author Topic: For SALE ( back on sale! ) Lot of 16 - 25" in-wall monitors [Seattle WA USA] (Read 9724 times)

Darth Nuno · « **Reply #40 on:** January 19, 2009, 01:12:35 pm »

Just a question regarding a Multiplexer. Do you know where to buy them ?

BASS! · « **Reply #41 on:** February 15, 2009, 04:32:47 am »

Allrighty guys, Well I know this has silent, but good news! I will be picking these up Wednesday 2-18-09 and will have them available. Due to some people dropping out, I may have extras. I will change the title of the post if those who have shown interest drop out. Thanks a ton guys! Talk to ya real soon:-)

shilmover · « **Reply #42 on:** February 17, 2009, 05:54:25 pm »

PM Sent

fa001 · « **Reply #43 on:** February 22, 2009, 05:38:52 pm »

Got mine and the picture is great. I used the 9 pin cable that came with it cut the small round end off. I found the wires inside to be:
pins 1&2 ground the shield wire
pin 3 Red the Black wire
pin 4 Green the Brown wire
pin 5 Blue the Red wire
pins 7&8 Sync the Orange wire
The only problem is that the image has what I believe to be called a pincushion problem. The adjustment on the monitor does not correct. So there is still a challenge.

BASS! · « **Reply #44 on:** February 23, 2009, 12:34:44 am »

hmmmm I would say that the pin setting on the back may have gotten bumped, or could also be a sync issue. Have you tried running different resolutions? I know these were running prior to being pulled. It may that the hsize is set too low. Just lemmie know if there is still an issue and I can swap it for a different one.

fa001 · « **Reply #45 on:** February 23, 2009, 05:36:14 pm »

I think that it will be ok if I keep playing with it. No need to exchange.
I was just posting to see if anyone else set one up.

BASS! · « **Reply #46 on:** February 23, 2009, 11:19:10 pm »

I'd say hit up the monitor forum for tips, I know of about 4 guys there that could probably be able to help. The worst case scenario would be messing with the rings on the back of the crt.

BASS! · « **Reply #47 on:** February 28, 2009, 05:36:59 am »

Quote from: fa001 on February 22, 2009, 05:38:52 pm

Got mine and the picture is great. I used the 9 pin cable that came with it cut the small round end off. I found the wires inside to be:
pins 1&2 ground the shield wire
pin 3 Red the Black wire
pin 4 Green the Brown wire
pin 5 Blue the Red wire
pins 7&8 Sync the Orange wire
The only problem is that the image has what I believe to be called a pincushion problem. The adjustment on the monitor does not correct. So there is still a challenge.

Looks like it was just a problem with the monitor and the board. Mame ran fine:-)

So anyway, these are back on sale due to a bunch not being able to come through. If youd like one, come on by. Local only please:-)

Sam

Red · « **Reply #48 on:** March 01, 2009, 02:01:05 am »

Quote from: fa001 on February 22, 2009, 05:38:52 pm

Got mine and the picture is great. I used the 9 pin cable that came with it cut the small round end off. I found the wires inside to be:
pins 1&2 ground the shield wire
pin 3 Red the Black wire
pin 4 Green the Brown wire
pin 5 Blue the Red wire
pins 7&8 Sync the Orange wire
The only problem is that the image has what I believe to be called a pincushion problem. The adjustment on the monitor does not correct. So there is still a challenge.

fa001,

What is the name of that football game you posted a pic of?

BASS! · « **Reply #49 on:** March 01, 2009, 04:44:55 am »

10 yard fight

Ummon · « **Reply #50 on:** March 01, 2009, 05:58:10 pm »

Quote from: uprightbass360 on February 28, 2009, 05:36:59 am

Quote from: fa001 on February 22, 2009, 05:38:52 pm
Got mine and the picture is great. I used the 9 pin cable that came with it cut the small round end off. I found the wires inside to be:
pins 1&2 ground the shield wire
pin 3 Red the Black wire
pin 4 Green the Brown wire
pin 5 Blue the Red wire
pins 7&8 Sync the Orange wire
The only problem is that the image has what I believe to be called a pincushion problem. The adjustment on the monitor does not correct. So there is still a challenge.

Looks like it was just a problem with the monitor and the board. Mame ran fine:-)

So what was the overall result of the circumstance?

fa001 · « **Reply #51 on:** March 01, 2009, 07:28:25 pm »

The monitor works great. It is just that each input type takes some adjustment to get it just right.

I have found that some game boards require more width than the standard external controls allow. The vs 10 yard fight seems to be one of those boards. I have not yet found the internal control to adjust the width more.

Using either the composite video or RGB from an AVGA video card I can get it to work just fine.

BASS! · « **Reply #52 on:** March 03, 2009, 05:25:26 am »

That is awesome to hear!
As a side note I am requesting a full schematic from the manufacturer so that we all have the info. I will let you know if they ever get me anything.

BASS! · « **Reply #53 on:** March 25, 2009, 05:45:07 am »

Still for sale. I was holding a bunch for some that have not shown up. Let me know if you want em:-)

baklakiller · « **Reply #54 on:** March 26, 2009, 05:30:01 am »

Will these work on a SF II arcade cabinet? How's the picture quality in these? How hard would it be to install one of these, as i have a sf2 arcade cabinet & only thing missing is a monitor...

BASS! · « **Reply #55 on:** March 26, 2009, 06:28:18 am »

The picture quality is great! As far as weather they would work on that board I would like to say yes, as this monitor takes board resolution, but I would not be able to test it for you. As far as ease of install, you would need to modify your mounting setup as they are allready in a case, but other than that probably nothin. I just set mine in my cabinet so far.

Guywiththegun · « **Reply #56 on:** March 26, 2009, 10:49:54 am »

I'm shocked you can't get rid of these . . I wish I lived in Seattle.

BASS! · « **Reply #57 on:** March 26, 2009, 05:38:25 pm »

Tell me about it. I was thinking that they would just fly right out considering I only want 25 per

.

andiamo-racing · « **Reply #58 on:** March 27, 2009, 12:01:01 pm »

So you won't ship these?

Ummon · « **Reply #59 on:** March 27, 2009, 06:05:46 pm »

andi - offer to set up the shipping yourself. Like, get a fedex account or something, and you can set a pick-up for his address. They may even box is for you, though I don't know how reasonably-priced, and then all he has to do is be there for them to pick it up.

BASS! · « **Reply #60 on:** March 27, 2009, 11:18:45 pm »

I like this idea. I would be more than happy to drop it off somewhere, but boxing and securing it for shipping are not really my forte. I know if I were in charge of packing it it would break on the way.

BASS! · « **Reply #61 on:** April 02, 2009, 03:28:44 am »

Bumppidy. These are schweet and this is the last shout before I post on CL and haul the rest to repc.

BASS! · « **Reply #62 on:** May 06, 2009, 09:49:28 pm »

Now available for sale on CL for 20 more each, buy em while they are cheap.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news