Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Mag Stik Plus Assembly Picture  (Read 1944 times)

0 Members and 1 Guest are viewing this topic.

Epyx

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1961
  • Last login:December 25, 2023, 07:56:36 pm
  • "You're an oddity"
Mag Stik Plus Assembly Picture
« on: November 23, 2008, 07:26:08 pm »
I was carefully (well trying) to take apart the Mag Stik Plus but the force of the spring pushed the parts out before I could see the order...anyone have a picture of the order for re-assembly? I have two washers with teeth that I am the most concerned about (with regards to order).

Thanks in advance...
Logged
Last Project



Epyx Tutorials:
Tutorials

paulscade

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 215
  • Last login:December 26, 2022, 09:40:35 pm
    • My Arcade Project - Blastoff!
Re: Mag Stik Plus Assembly Picture
« Reply #1 on: November 23, 2008, 08:52:55 pm »
When I tool mine apart... I placed the parts on the table in order... hope this helps...

http://forum.arcadecontrols.com/index.php?topic=82241.msg891255#msg891255

I believe that the toothed washers were on the inside of the u shaped part.
Logged
... Why is it that you always find it in the last place that you look? ...

Epyx

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1961
  • Last login:December 25, 2023, 07:56:36 pm
  • "You're an oddity"
Re: Mag Stik Plus Assembly Picture
« Reply #2 on: November 23, 2008, 09:07:39 pm »
Awesome. Thanks very much!
Logged
Last Project



Epyx Tutorials:
Tutorials

AndyWarne

  • Trade Count: (+18)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1938
  • Last login:April 11, 2021, 03:37:09 am
    • Ultimarc
Re: Mag Stik Plus Assembly Picture
« Reply #3 on: November 24, 2008, 11:19:02 am »
There is a full diagram on http://www.ultimarc.com/controldiags.html if you still need any info.
Andy
Logged

opt2not

  • Trade Count: (+15)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6173
  • Last login:April 02, 2024, 07:42:30 pm
Re: Mag Stik Plus Assembly Picture
« Reply #4 on: December 05, 2008, 02:15:08 pm »
Hey Andy, do you sell the Mag Stik Plus replacement shafts alone?  Without balltops?

I've got a few spare balltops I want to use, but I don't want to go through the hassle of trying to breakthrough the locktite seal of the balltop shafts you supply off your site.

Thanks!
Logged

Epyx

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1961
  • Last login:December 25, 2023, 07:56:36 pm
  • "You're an oddity"
Re: Mag Stik Plus Assembly Picture
« Reply #5 on: December 05, 2008, 03:49:11 pm »
Thanks Andy!
Logged
Last Project



Epyx Tutorials:
Tutorials

AndyWarne

  • Trade Count: (+18)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1938
  • Last login:April 11, 2021, 03:37:09 am
    • Ultimarc
Re: Mag Stik Plus Assembly Picture
« Reply #6 on: December 06, 2008, 07:33:14 pm »
Yes we could supply the shafts on their own, we can arrange this if you drop me an email: andy@ultimarc.com
Logged
Pages: [1]
  
Go Up
« previous next »