Anyone come up with a definitive way of getting these things to work easily? I was planning on going to radio shack today and looking for a power cord to at least have a 15" monitor...
I am still waiting for the parts I ordered to come in to see if they will work. They should be here around 10/21. If they work, I'll post all the information on it.
It's the 22nd man, what's taking so long! 
Simply put... hmm life happened =)
Anyway quick and dirty the parts appear to be the ones that will work. I have not had a chance to install them and wont for awhile, but here is the info. It came with 4 cords total. The 10 pin header to power the touch controller (3 wires appear to be for power / ground / and frame ground), A header to serial port cable, a ground cable, and a serial to serial cable to attach the internal serial cord to your computer.
To order this set here is the information:
Visit:
www.elotouch.comIn the upper right coner click on the "Sign in to Elo e-service" and you can click on login as Guest.
After login click on the search in the upper right and type in this part #"750345-000" and then check out.
Enjoy and sorry for the delay. Hope this helps.