Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Mounting the joysticks and wondering if I bought the right ones....  (Read 1508 times)

0 Members and 1 Guest are viewing this topic.

BORIStheBLADE

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 341
  • Last login:February 03, 2012, 10:53:59 pm
Mounting the joysticks and wondering if I bought the right ones....
« on: March 05, 2008, 11:01:28 pm »
I drilled all my holes and pulled out a joystick to see what its going to look like. I have Happs Comp and 3/4" thick cp. When I ordered my buttons and joysticks way back I ordered these with the intentions of mounting them on the back side of the cp not thinking if they would work. Right now  they seem kind of short.
So my question is are these stick ok to be mounted on the back side? I went on Happs website and all they have is a disection of the sticks and no other info, I'm wondering if 3/4" CP is too thick.

Thanks for the help
Logged

Kevin Mullins

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4504
  • Last login:February 01, 2021, 01:29:34 pm
    • Me on Myspace
Re: Mounting the joysticks and wondering if I bought the right ones....
« Reply #1 on: March 05, 2008, 11:19:03 pm »
Which notch are you putting the "E" clip in on the joystick shaft?
Logged
Not a technician . . . . just a DIY'er.

BORIStheBLADE

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 341
  • Last login:February 03, 2012, 10:53:59 pm
Re: Mounting the joysticks and wondering if I bought the right ones....
« Reply #2 on: March 06, 2008, 12:01:28 am »
I was thinking about putting it in the one at the bottom.
Logged

Havok

  • Keeper of the __Blue_Stars___
  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4530
  • Last login:August 03, 2025, 02:34:22 am
  • Insufficient facts always invite danger.
Re: Mounting the joysticks and wondering if I bought the right ones....
« Reply #3 on: March 06, 2008, 12:19:36 am »
Just route out some of the control panel from underneath - a 1/4 inch should do...
Logged
Pages: [1]
  
Go Up
« previous next »