Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Help me with my CPS-1 SF2  (Read 1684 times)

0 Members and 1 Guest are viewing this topic.

DJ Silent

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:March 16, 2008, 06:29:26 pm
Help me with my CPS-1 SF2
« on: March 04, 2008, 01:10:50 am »
Ok so I bought this full cab for 50 bucks off of craigslist. Monitor tube was blown so I hooked it up via scart (using the pinout from the jamma wiring diagram to check) and I am getting this image.


The blocking makes me think that the board is messed up, any opinions would be great. Game runs great has all sounds and characters but isn't really fun with the screen all messed up. Here's what it should look like for reference.
Logged

DJ Silent

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:March 16, 2008, 06:29:26 pm
Re: Help me with my CPS-1 SF2
« Reply #1 on: March 04, 2008, 04:57:56 pm »
Anyone have any idea?
Logged

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10328
  • Last login:July 23, 2025, 07:04:20 pm
  • boom
    • Arcade Madness
Re: Help me with my CPS-1 SF2
« Reply #2 on: March 04, 2008, 05:01:09 pm »
Looks like one of the graphics chips may be glitchy... you may be able to fix this problem by removing the ROM chips (gently!!) and cleaning the legs, and reseating the chips back in the board.

I can't stress enough how careful you need to be while doing this.  You don't want to bend/break the legs in the process.
Logged

knave

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1580
  • Last login:February 01, 2025, 06:42:47 pm
Re: Help me with my CPS-1 SF2
« Reply #3 on: March 04, 2008, 05:04:26 pm »
I would try reseating them first.
Logged

DJ Silent

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:March 16, 2008, 06:29:26 pm
Re: Help me with my CPS-1 SF2
« Reply #4 on: March 04, 2008, 05:07:17 pm »
can you point me out the graphics chips?
Logged

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10328
  • Last login:July 23, 2025, 07:04:20 pm
  • boom
    • Arcade Madness
Re: Help me with my CPS-1 SF2
« Reply #5 on: March 04, 2008, 05:11:58 pm »
Quote from: DJ Silent on March 04, 2008, 05:07:17 pm
can you point me out the graphics chips?

I'm not sure which ones they are.  I had a similar problem (but not as bad) with my SFII board, so I just did all the chips.
Logged

DJ Silent

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:March 16, 2008, 06:29:26 pm
Re: Help me with my CPS-1 SF2
« Reply #6 on: March 04, 2008, 07:16:14 pm »
I pulled them all in order on the 1st and 2ndary boards and didn't fix the problem, Any other Ideas?
Logged

Bluedeath

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 206
  • Last login:June 19, 2014, 11:20:09 am
Re: Help me with my CPS-1 SF2
« Reply #7 on: March 05, 2008, 10:43:45 am »
use some dry electronic contact cleaner in the IC slot be4 butting the chips back in.
Logged
I give up  fighting keyboard dislexia, I lost.
Pages: [1]
  
Go Up
« previous next »