Visio Diagram of Control Panel

[Lucky S.O.B.]

I was going to use visio to create my layout of my CP, and I made the image the correct size so I can print it out on a plotter and use it for cutting etc...

My question is:

Is this the best way to do this? If not what do you suggest?

I know the mounting info for buttons and controllers, but where can I find the measurements for happs trackball, oscar spinners, etc.

If anyone has already done this could you send me the visio so I can cut and paste stuff?

derrickjudge@intuit.com

-Derrick

[TheTick]

Happs has the measurements under the expoded views and mounting views.
Oscar also has measurements to the left of the detailed view pages.

I'll send you over a ZIP of one of my Visio files. It has a template with a few buttons and I think Universial controllers (the ones that don't need mounting plates). The scale is 1:1.

The spinner and trackball aren't on the template, yet. I was going to use the actual mounting plates, so I just use a square to reserve the space. The Happs 3" trackball mounting plate is 6.5"x6.5".

[Lucky S.O.B.]

Thanks, this will keep me busy for a few days  

[Frostillicus]

look under the downloads section of this site - there are a ton of visio files.  

[TheTick]

Those are generally 2:1, which isn't a problem. I did my template as 1:1, and just changed the scale of the paper.

Email bounced back as undeliverable, so you're gonna have D/L the ones from the website.

derrickjudge@intuit.com on Tue, 6 May 2003 16:27:28 -0700
    The recipient name is not recognized
   The MTS-ID of the original message is: c=us;a=
;p=intuit;l=EXBH020305062327JQPGR4LB
    MSEXCH:IMS:Intuit:BridgeHead-SD:EXBH02 0 (000C05A6) Unknown Recipient