Author Topic: X Arcade Trackball Mounting Plate? (Read 3221 times)

RetroGreg · « **on:** October 16, 2007, 09:58:13 pm »

Hello,

I've been looking over the forums for about a week now and have decided to make my own panel.

Does anybody know if the X Arcade trackball can be mounted with a standard Happs mounting plate?

I plan on putting a 3" trackball, TT2 spinner, 2 player set up with a dedicated 4 way stick on the panel. I may leave room for a flight stick in the future, but don't know if it will be worth it. Any suggestions? Thanks for your help!!

RetroGreg · « **Reply #1 on:** October 17, 2007, 11:14:41 am »

I should add that I searched the forums and only found instances where people mounted the x arcade trackball without a plate by just routing the underside of the panel. I would prefer to use a mounting plate and x arcade does not offer one. Maybe someone knows if they are compatible with the happs plate.

The reason I figured I'd get the x arcade trackball is to save some $ and they give a warranty on their products.

Any help is appreciated.

zaphod · « **Reply #2 on:** October 17, 2007, 11:30:32 am »

The X-arcade trackball is the same case as the Betson trackball. It fits perfectly in the Happ mounting plate.

RetroGreg · « **Reply #3 on:** October 17, 2007, 11:45:53 am »

Cool. Thanks for the help! Looking forward to starting my panel

DeLuSioNal29 · « **Reply #4 on:** October 17, 2007, 01:20:50 pm »

Have you considered saving even more money and getting this?

http://www.x-arcade.com/mame-panel.shtml

The only thing is that it does not have a spinner built in, but I'm sure you can add one yourself with a plug and play USB interface.

RetroGreg · « **Reply #5 on:** October 17, 2007, 03:05:38 pm »

Thanks for showing me that. It's a great idea, but I have been using an X Arcade solo for the past few years - and I do think they make good products. I just want to build my own to really customize it and to have a good project to work on.

I am going to have to buy most of the power tools required, but I should own them anyway. Since I'll have them, I may end up building a custom cabinet to put my control panel in. I'll just make sure the panel is made to be compatible for that later.

xmenxmen · « **Reply #6 on:** October 17, 2007, 03:12:17 pm »

don't forget craiglist. It's a good place to buy used tools. Half of my cabinet tools are from there.

RetroGreg · « **Reply #7 on:** October 17, 2007, 07:21:17 pm »

Good idea. I'll take a look!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: X Arcade Trackball Mounting Plate? (Read 3221 times)

RetroGreg

X Arcade Trackball Mounting Plate?

RetroGreg

Re: X Arcade Trackball Mounting Plate?

zaphod

Re: X Arcade Trackball Mounting Plate?

RetroGreg

Re: X Arcade Trackball Mounting Plate?

DeLuSioNal29

Re: X Arcade Trackball Mounting Plate?

RetroGreg

Re: X Arcade Trackball Mounting Plate?

xmenxmen

Re: X Arcade Trackball Mounting Plate?

RetroGreg

Re: X Arcade Trackball Mounting Plate?