Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Can I use heat shrink tubing for this?  (Read 1315 times)

0 Members and 1 Guest are viewing this topic.

displacedtexan

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 30
  • Last login:August 20, 2007, 11:13:38 pm
  • I want to build my own arcade controls!
Can I use heat shrink tubing for this?
« on: April 23, 2007, 09:47:11 pm »
I cut out a hole in a plastic enclosure for NES controller port.  Unfortunately the edges aren't as smooth as I would like.

Can I buy some heat shrink tubing, cut it in half and apply it to the edges?

Is there any other material that I could use to cover the edges with to make it look more professional?

Thanks!!
Logged

Xam

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 507
  • Last login:July 18, 2011, 11:16:45 pm
  • " Oh my heavens; good gracious. Cro-Magnons."
Re: Can I use heat shrink tubing for this?
« Reply #1 on: April 23, 2007, 10:39:17 pm »
How big is the hole?
Is it round or square or an obtuse triangle?

Also a pic would help us determine the best course of action.

Xam
Logged
Can't talk to a psycho like a normal human being.

displacedtexan

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 30
  • Last login:August 20, 2007, 11:13:38 pm
  • I want to build my own arcade controls!
Re: Can I use heat shrink tubing for this?
« Reply #2 on: April 23, 2007, 11:07:14 pm »
Picture attached.  I basically want to add some sort of gasket material to fill in the spaces and make it pretty.

Thanks!!
Logged

AwesomeAlbert

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 175
  • Last login:October 28, 2014, 12:14:28 am
Re: Can I use heat shrink tubing for this?
« Reply #3 on: April 23, 2007, 11:19:01 pm »
they make a plastic chrome or black trim for the edges of car doors, try that.
Logged

Loki

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 294
  • Last login:August 14, 2012, 08:00:32 am
    • Deathnote
Re: Can I use heat shrink tubing for this?
« Reply #4 on: April 23, 2007, 11:21:56 pm »
Or cover the whole thing up with some vinyl and cut some pieces out where you insert the controllers?
Logged
Don't eat yellow snow.

mountain

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1205
  • Last login:January 29, 2025, 08:31:47 am
    • Mountain Jukeboxes
Re: Can I use heat shrink tubing for this?
« Reply #5 on: April 23, 2007, 11:39:15 pm »
Do you have any vacuum hose (automotive)? Take a small piece, the circumference of the hole, and slice it the entire length on one side. Then just wedge the plastic in the slice and you have a grommet  :D
Logged

displacedtexan

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 30
  • Last login:August 20, 2007, 11:13:38 pm
  • I want to build my own arcade controls!
Re: Can I use heat shrink tubing for this?
« Reply #6 on: April 23, 2007, 11:49:51 pm »
Quote from: Loki on April 23, 2007, 11:21:56 pm
Or cover the whole thing up with some vinyl and cut some pieces out where you insert the controllers?

I like the vinyl idea.  Where is the best place to get such a small quantity?  I have looked in the BST forum and on ebay... I know happ has it, but I don't particularly want to deal with their exorbitant shipping...
Logged
Pages: [1]
  
Go Up
« previous next »