Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: 2nd Coin mech, what do you think?  (Read 2636 times)

0 Members and 1 Guest are viewing this topic.

TheGreg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • Last login:November 10, 2008, 09:46:53 am
  • I want to build my own arcade controls!
2nd Coin mech, what do you think?
« on: February 03, 2007, 02:54:59 pm »
I'm just wondering if anyone ever switched out their quarter coin mech for any other denominations?  My machine only has one coin mech (quarters), so I was thinking about getting another one and I'm wondering if anyone's ever seen ones that take nickels or dimes or something.

It's just something that popped into my head today.  Anyone ever try anything like that?

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7919
  • Last login:July 27, 2025, 11:06:50 am
Re: 2nd Coin mech, what do you think?
« Reply #1 on: February 03, 2007, 02:58:07 pm »
I believe you can buy coin chutes that accept any coin. It doesn't have a weight comparator in it.

JustMichael

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1438
  • Last login:September 27, 2015, 01:19:40 am
  • Mmmmm!! Cheesecake!!
Re: 2nd Coin mech, what do you think?
« Reply #2 on: February 03, 2007, 03:24:36 pm »
I have a couple Imonex coin mechs in my cab that take tokens or quarters.

SithMaster

  • Lets see how happy you are when you need to use a lawn mower and it keeps turning off when you want to cut up zombies.
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1781
  • Last login:January 12, 2014, 03:52:59 pm
  • The brightest light casts the darkest shadow.
Re: 2nd Coin mech, what do you think?
« Reply #3 on: February 03, 2007, 07:00:44 pm »
people have made their own mechs that accept any type of coin.
Back in MY day we lived on the moon and we had to build a rocket ship from scratch to get to the Earth before we suffocated.

Fozzy The Bear

  • Handbags at dawn in here!!!
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1831
  • Last login:September 18, 2011, 11:29:59 am
  • It's Been One Of Those Days... Don't Ask!
Re: 2nd Coin mech, what do you think?
« Reply #4 on: February 04, 2007, 10:29:44 am »
I'm just wondering if anyone ever switched out their quarter coin mech for any other denominations?  My machine only has one coin mech (quarters), so I was thinking about getting another one and I'm wondering if anyone's ever seen ones that take nickels or dimes or something.

It's just something that popped into my head today.  Anyone ever try anything like that?

Depends how much you want to spend....  You can get a programmable electronic coin mech and a credit board. Electronic mechs usually have the ability to store information about 6 coin types all at once. You just teach them what the coins look like by switching the mech into program mode and telling it which of those 6 channels you want to program. You then feed about 10 or 12 coins of the correct type through it so that it learns what they should look like.

The mech is then connected to a credit board which reads the pulses from each of the channels and counts them. The credit board is programed to send out a credit pulse to the game when it has received the correct number of pulses from the mech.

For example..... lets say that 1 game = $1USD 
If the credit board receives 4 pulses from mech Chanel 1 (which you have programed to read quarters) then it will send out 1 credit pulse to the game.
OR
Lets say you put 10 X 10Cents into the mech.... you may have programed Chanel 2 to read those... Once the credit board sees 10 pulses on Chanel 2 it will again send 1 credit pulse to the game.

BUT it's not cheap... you could perhaps acquire good ones second hand for about $180USD.

Best Regards,
Julian (Fozzy The Bear)

Most bottles and jars contain at least twenty-five percent recycled Pacman.
And research indicates that Space Invaders are strongly attracted to people who have recently eaten meat pies.

flextechs

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:April 30, 2016, 09:50:27 am
Re: 2nd Coin mech, what do you think?
« Reply #5 on: April 06, 2007, 12:07:16 am »
people have made their own mechs that accept any type of coin.


Anyone have a picture of this?

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: 2nd Coin mech, what do you think?
« Reply #6 on: April 06, 2007, 12:42:25 am »
Mechanical type nickle and dime mechs are still manufactured. They are used in slot machines primarily now.

missioncontrol

  • MC-Retro says Wot!
  • Trade Count: (+13)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7855
  • Last login:November 06, 2024, 06:22:12 pm
Re: 2nd Coin mech, what do you think?
« Reply #7 on: April 06, 2007, 12:57:21 am »
you can hack a coin mech to accept other values..... There's a thread somewhere around here... I'll see what I can find


Donkey_Kong

  • heh. I dont know what it stands for but I'm immature and thats hilarious.
  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1693
  • Last login:October 20, 2019, 12:39:54 am
    • CNC Machines
Re: 2nd Coin mech, what do you think?
« Reply #9 on: April 06, 2007, 01:09:46 am »
Also, Andy has a coin mech that claims to accept any coin and can be changed. He sells it for $26.00 new. I don't know of anyone that has tried this coin door.

You can read about it here...
http://www.ultimarc.com/controls.html#cabparts

If I were good at hacking stuff I would try that...but I'm not.
Carved Signs, Custom Gameroom Signs, and Arcade Game Decor and now CNC MACHINES by Melissa Jones

Kaytrim

  • I'm too nice a guy
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2095
  • Last login:September 22, 2015, 04:11:30 pm
Re: 2nd Coin mech, what do you think?
« Reply #10 on: April 06, 2007, 09:52:07 am »
Thanks for the links MC.  When I am ready to work on my coin door I'll go over these again. :cheers:

Kaytrim

missioncontrol

  • MC-Retro says Wot!
  • Trade Count: (+13)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7855
  • Last login:November 06, 2024, 06:22:12 pm
Re: 2nd Coin mech, what do you think?
« Reply #11 on: April 06, 2007, 01:48:48 pm »
Thanks for the links MC.  When I am ready to work on my coin door I'll go over these again. :cheers:

Kaytrim


just don't tell anyone I was helpful, I have an EE image to maintain.....