I know this type of question gets asked a lot around here, but I've looked everywhere and can't find anything conclusive.
I have an over/under coin door that looks like a Happs at first glance, but after some searching I've found that it's an international type used mostly in England (a similar reject button assembly is seen here:
http://www.pbresource.com/signatur/gsys3coindoor2.jpg). As such, I cannot replace the coin reject buttons with the ones Happ makes. I would have liked to get a couple blue replacements:
http://www.happcontrols.com/cc/420517xx.htm It seems like the Wells-Gardener reject button replacements are the closest match I can get so my question is, does anyone have a WG coin door and/or the replacement buttons, and are they a close match to the images attached below? Bonus points for anyone who can lead me to blue tinted or clear reject buttons!
EDIT: Note, the major differences are that the coin slot is on the button itself and not the bezel, and that the plunger where the spring goes on is on the bottom (i have it upside down in the pictures, oops), not in the middle as it appears to be on the happs replacements.