Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: help with credit bourd  (Read 840 times)

0 Members and 1 Guest are viewing this topic.

smythe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 43
  • Last login:June 13, 2010, 04:28:06 pm
help with credit bourd
« on: August 18, 2006, 03:21:18 am »
i have a jamma loom + street fighter 2 jamma cps2
ive hooked everything up joystcks/speakers ect ect
i know jamma has coin 1 & coin 2
but the oin slot has a few wires
any ideas what to hook up & where?

cheers smythe

Kevin Mullins

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4504
  • Last login:February 01, 2021, 01:29:34 pm
    • Me on Myspace
Re: help with credit bourd
« Reply #1 on: August 18, 2006, 10:48:35 am »
A pic would be helpful if you have one...... to see the wires you mention.

A typical two slot coin mech has two wires, three if each player is coinable.

"coin" and "ground"

If it's illuminated, then there will also be power wires for the bulbs.
(does not come from the jamma harness)
Not a technician . . . . just a DIY'er.

smythe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 43
  • Last login:June 13, 2010, 04:28:06 pm
Re: help with credit bourd
« Reply #2 on: August 18, 2006, 06:12:44 pm »
ill try to get a pic till then heres what i have
it's like a mars coin accepter + a coin bourd with dip switches ect

theres a red & white wire with psu ( ive hooked up 12v from loom) and it dont like it?

theres then 2 wires with bulb conneted + 4 other seperate wires

on my loom theres a blue & grey with a bulb conneted
some other colourd wires 4 + a black one touch some on these together & ching ching...
i really need to check where they are on the jamma pinout...

my main concern now is why the psu for the coin bourd stops my csp2??
where would i best get power from?

cheers smythe