Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Can I use 1/4" router bits in a 1/2" shank router?  (Read 1113 times)

0 Members and 1 Guest are viewing this topic.

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7924
  • Last login:October 17, 2025, 10:29:23 am
Can I use 1/4" router bits in a 1/2" shank router?
« on: July 17, 2006, 06:43:45 pm »
My router accepts 1/2" shank bits but most of the stores around here carry 1/4" bits. Is there an adapter of some sort? Or is there a better solution to this problem?
Logged

botman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • Last login:May 06, 2009, 01:11:02 pm
  • There is no spoon.
Re: Can I use 1/4" router bits in a 1/2" shank router?
« Reply #1 on: July 17, 2006, 08:12:28 pm »
I think you are looking for a bit extension.  Something like this...

http://www.mlcswoodworking.com/orderstatus/html/smarthtml/pages/routcollet.html
Logged

MikeDeuce

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 359
  • Last login:September 15, 2013, 04:38:38 pm
  • It does a body good.
Re: Can I use 1/4" router bits in a 1/2" shank router?
« Reply #2 on: July 17, 2006, 09:40:31 pm »
Depending on the router, you can sometimes find replacement collets in the other size.

So... whatcha got? :)
Logged

DrewKaree

  • - AHOTW - Pompous revolving door windbag *YOINKER*
  • Wiki Master
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 9740
  • Last login:May 15, 2021, 05:31:18 pm
  • HAH! Nice one!
    • A lifelong project
Re: Can I use 1/4" router bits in a 1/2" shank router?
« Reply #3 on: July 17, 2006, 09:53:41 pm »
There's usually an adaptor that fits into your router's collet to change the size shank your router will accept.  It simply slides in and is gripped by the larger collet, which in turn tightens and grips the smaller-shanked bits.

Who makes your router and what model is it?
Logged
You’re always in control of your behavior. Sometimes you just control yourself
in ways that you later wish you hadn’t
Pages: [1]
  
Go Up
« previous next »